Besenzoni BUC Bedienungsanleitung
Download
Besenzoni Control Device
from the APP Store
With you can use your smartphone
to manage the handling of hydraulic gangway
Besenzoni installed on board through
bluetooth technology.
Download the Besenzoni Control Device App
from the App store, check that your device
is compatible with the operating systems
that allow the App to work:
IOS 0.0 or later
Android 7.0 or later
BLACK VERSION
Watch
video
I
Garanzia:
Besenzoni fornisce una garanzia sul prodotto in conformità della normativa vigente.
In casi di disputa: a) per clienti italiani sarà competente l’Autorità giuridica italiana
in particolare il foro di Bergamo. b) per cliente esteri si ritiene competente l’arbitrato
della Camera di Commercio Internazionale.
Important information:
Before positioning, installing and commissioning the device, read this instruction manual
carefully as it contains important information on assembly, safety and use.
Do not change or tamper with any part of the device.
Improper use could harm people and/or objects.
Besenzoni S.p.A. cannot be held responsible for damages caused by failure to follow these
instructions. Keep these user instructions safe and pass them on to any future users.
Only a specialised technician may install the Besenzoni Unit Control
contained in this box. You may find it useful to check the “Assistance and Resellers”
section in the Besenzoni Control Device App, which includes a map
of our official Service points that you can contact.
This box contains:
A1 - Besenzoni Unit Control.
Bluetooth Receiver / Adaptor code 7FF99617 to be used
with up to 8 smartphones/devices.
B1 cable with split for connection to the 6-key control panel
for moving the retractable gangway to be used in the presence
of systems without dual output.
INSTRUCTIONS FOR INSTALLATION AND USE
The instructions for installation and use in Italian and English are available on:
www.besenzoni.it/landing/buc
RETRACTABLE
GANGWAY ELECTRONIC
JUNCTION BOX
Button control panel
to control a retractable passerelle
Cable with SPLIT
Connector 4P
+12V o 24V
+12V o 24V
D
C
B
blue LED
A
Remove the power source from the system that controls the passerelle.
Install the receiver/adaptor far away from heat sources
and electromagnetic disturbances.
Connect the connector cable of the Besenzoni Unit Control to the electronic
control unit of the retractable gangway:
Option 1: In the case in which the electronic control unit is already equipped
with double input (from 2018 onwards):
- Leave the electronic board connected fi g . Con the 6-key control panel
of the retracting gangway fi g . D.
- Connect the receiver/adapter fi g . Adirectly to the gangway electronic board
shown in
fi g . Cin the free socket on the electronic board.
Option 2: In the event that the electronic control unit does not have a double input:
- Use the cable fi g . Bto connect both the and the 6-key panel fi g . D.
Take note of the password on the label attached to the front of the .
Power the circuit board with the electronic junction box line
stabilised at 12/24 volts.
Restore power to the system.
Activate the device’s bluetooth.
Open the App on your device.
Click Settings from the dropdown menu in the top left-hand corner.
Choose and set an unlock code which you will also use in the future.
Deactivate the Demo mode and tick “Start in Command View”.
Click “Set Device Code” and insert the 5 digit security code
shown on the label
Click “Select device” and select the device that corresponds
to the name shown on the label: e.g. Name: Besenzoni1010.
Click the Dropdown menu button.
Click Command and then the screen to start the App.
The commands to control the passerelle will appear in the next screen.
In order to correctly control the passerelle, you must press and hold
the selected command, otherwise an Error message will show up
on the device’s screen. To restart the controlling operation,
press and hold the command again.
INSTALLATION PROCEDURE ACTIVATION PROCEDURE
NOTA
Settings: by selecting Launch Commands when you next open the App, once you have
inserted your unlock code, you will have immediate access to the commands section.
Controlling the passerelle via the App still allows you to use the remote control
that you have been supplied with.
PROCEDURA AZZERAMENTO DEVICES MEMORIZZATI:
1) Open the lid of the by removing the 2 screws.
2) Press the S1 button indicated in the image for 2 seconds
until the blue LED goes out.
3) Close the receiver cover. S1
Led blu
BESENZONI S.p.A.
Via Molere 2 - 24067 Sarnico (BG) Italy
Ph. +39 035 910456 r.a. | Fax +39 035 4261633
WARRANTY
Besenzoni provides a warranty for the product in compliance with the legislation in force. In case of dispute:
a) for Italian customers, the Italian law will apply and the Court of Bergamo will be competent.
b) for customers outside Italy the arbitrators of the International Chamber of Commerce will be competent.
BLACK VERSION
Inhaltsverzeichnis
Andere Besenzoni Steuereinheit Handbücher
Beliebte Steuereinheit Handbücher anderer Marken
Festo
Festo Compact Performance CP-FB6-E Stücklistenhandbuch
Elo TouchSystems
Elo TouchSystems DMS-SA19P-EXTME Bedienungsanleitung
JS Automation
JS Automation MPC3034A Bedienungsanleitung
JAUDT
JAUDT SW GII 6406 Series Kurzanleitung
Spektrum
Spektrum Air Module System Bedienungsanleitung
BOC Edwards
BOC Edwards Q Series Bedienungsanleitung
