BEX TS4 Benutzerhandbuch

TS4-EN-R2021.01 TS4-EN-R2021.01 Original use and maintenance

instructions: TS4

ORIGINAL USE AND MAINTENANCE INSTRUCTIONS

TS4 BIO-SHREDDER

NOTES

This manual is an integral part of the machine.

This manual is provided with the machine and the user should always have a copy with him.

The attachments are integral part of the manual.

Aim of the manual

This manual contains all useful information for a correct and safe use of the machine.

Before starting to use this machine, the user should read this manual carefully.

The user's responsibility

The user will be considered responsible for accidents and damages to things and people due to non-respect of

the instructions contained in this manual. Therefore, the manufacturer assumes no responsibility in the following

cases:

Using the shredder for the wrong purposes.

Using the shredder for purposes other than the ones specified in this manual.

Failing to carry out requested maintenance.

Modifying the machine without the express authorization of the manufacturer.

Using not original spare parts.

EC CONFORMITY

The ARGO bio-shredders meet the security and safety requirements contained in the Machinery Directive

2006/42/CE.

In order to demonstrate conformity with the above-mentioned directives, the following harmonized standards

have been consulted: UNI EN ISO 12100:2010; 13857:2008; 13683:2011.

The CE marking shall be affixed on the machine with the name of the model, its year of realization and its serial

number. If you need spare parts or maintenance services under guarantee, please always include the machine

serial number.

The EC certificate of conformity is always provided with the machine. Keep it in a safe place.

TECHNICAL FEATURES

Model HP Max ø of cut Knives PTO speed

Peripheral speed

of the rotor

Weight

cm Inch n° rpm m/s Kg Lbs

TS4

30-80 10 4 4 540 33 233 514

INSTRUCTIONS FOR USING THE MACHINE

The machine is designed for shredding plant material, leaves and natural pieces of wood of the

dimensions indicated in the technical features. Never introduce the following materials in the shredder:

plastics, glass, rocks, or metal.

Before introducing the material in the charging hopper, make sure it does not contain foreign objects.

The machine stands on the ground with its own base. It is strongly suggested to set the machine only

on flat horizontal and not excessively rigid surfaces to avoid vibrations which might affect the proper

functioning of the machine.

The machine must be operated by only one user.

Never to leave this machine unattended without removing the key and checking that the engine is shut

off.

SECURITY

ENERAL INFORMATION



This manual is an integral part of the machine. In case of loss, please ask DEL MORINO company for a

copy.



Protections are integral part of the machine: always work with all protections properly mounted.



Work in the daylight only or at least under appropriate artificial lighting.



Always wear

protection goggles, gloves, and hearing protection



Never wear scarves, jewelry or other accessories that could be caught in the machine



Warning:

never use this machine in enclosed and unventilated areas because the engine of the tractor

emits substances with high concentration of carbon dioxide.



Warning:

Use this machine on flat, horizontal and firm grounds only.



Before leaving the machine unattended, make sure the PTO of the tractor is disconnected.



If you notice any anomalies, such as hisses or strange vibrations, please stop the machine immediately.



Replace the defective parts exclusively with original spare parts.

LOCAL RULES



Make sure that any person using this machine has read the instructions. Do not let children use it.



Local rules might prevent people under a certain age from using this machine.

WARNING



Stopping in front of the charging hopper or in front of the feed chute is forbidden when the machine is used.

Danger from materials that might be ejected at high speed.



Never look directly in the charging hopper while working.



Always stand on the side if the charging hopper while working.

SAFETY LABELS

In this section, the safety labels of the machine are reproduced and explained.

1. While working, always wear suitable protective clothes.

2. While working, always wear gloves.

3. While working, always wear hearing protection.

4. While working, always wear

eye protection goggles.

5. While working, always wear safety footwear.

6. Read this manual carefully.

7. Maximum diameter of cutting: 10 centimeters.

8. Warning: do not turn on the machine without the protections properly installed.

Safety labels must be readable.

1. If damaged, labels should be replaced.

2. If parts of the machine with safety labels are replaced, the labels should be replaced as well.

Supply of new safety labels and instructions to apply them.

ASSEMBLY OF A NEW MACHINE

1. Take the machine “MAC”, the exhaust pipe “TS” with its coupling flanges “FS” and “FI”, the hopper “TR”,

the extension for the hopper “PT”, the hopper protection “BA” and the original use and maintenance

instructions out of the box.

2. Mount the hopper "TR" on the flange of the machine body using the five supplied screws.

3. Mount the extension of the Hopper “PT” on the hopper “TR” by interposing the safety strip “BA” and sing

the nine supplied bolts.

4. Lay the exhaust pipe "TS" on the flange "FT" and keep it in position using the two coupling flanges "FS"

and "FI" and the four supplied bolts.

CHECKING THE LENGTH OF THE PTO SHAFT

1. After connecting the machine to the third point, check that it is on a flat surface and centered in relation

to the tractor by acting on the adjusting devices.

2. Place the PTO shaft between the tractor's and the bio-shredder PTO.

3. Check that the length of the PTO shaft is correct.

4. The length is correct if the minimum coupling length between inner and outer tube is not less than 180

mm in each working position, and if, at the same time, the PTO shaft can still make a stroke of at least

25 mm in the condition of minimum extension.

5. If the minimum coupling length is less than 180 mm, the PTO shaft is short and shall be replaced with

another of greater length.

6. When minimally extended, if the remaining stroke is less than 25 mm, the PTO shaft is long, and

therefore it is necessary to shorten it.

7. WARNING: shortening the PTO shaft is a tricky operation and it must be carried out carefully following

the instructions of the next chapter, otherwise you risk to ruin the PTO shaft irreparably.

HOW TO SHORTEN A PTO SHAFT

1. Place the machine as close to the tractor as possible, by acting on the hydraulic lift.

2. In this position, lock the lifter and turn off the engine.

3. Pull the two parts of the PTO shaft out.

4. Insert the female PTO shaft (tube of larger diameter) into the tractor PTO.

5. Insert the male PTO shaft (tube of smaller diameter) into the PTO of the machine.

6. Use a marker to mark the cutting point as shown in Figure 1 while keeping the two parts of the PTO

shaft parallel.

1. Cut with a hacksaw the plastic pipe on the previously drawn line on one of the parts of the PTO shaft.

2. Align the piece that has just been cut to the end of the metal pipe and then cut it.

3. Repeat the same operations on the second PTO shaft.

4. Deburr and blunt the ends of the metal pipes with a file.

5. Clean and grease the two metal tubes then thread the two parts one into the other.

6. Fit the PTO shaft between the tractor and the bio-shredder and check the length again.

Figure 1

HOW TO USE THE MACHINE

ARNING

the machine is designed to be used with a tractor with a right-handed PTO 540 RPM.

2. Hook the machine to the hydraulic lift of the tractor.

3. Mount the PTO shaft between the PTO of the tractor and the machine. Make sure that the two chains of

the PTO shaft which prevent it from rotating are secured respectively to the tractor and to the machine.

Make sure that the protections at the ends of the PTO shaft are present and efficient.

4. Place the machine on solid, flat ground. The machine can not be used in closed rooms that are not

properly ventilated.

. P

RELIMINARY CHECKS

1. Check that there are no foreign bodies in the hopper.

2. Check the material to be shredded and remove any foreign bodies beforehand. (Stones, plastic, pieces

of cloth, ferrous materials)

DJUSTING THE MACHINE

1. To adjust the inclination of the exhaust deflector "D", unscrew knob "E", move the deflector to the

desired position and then screw the knob "E" again.

2. To adjust the discharge direction of the tube "A", lift and keep knob "B" raised, rotate tube "A" to the

desired position acting on the lever "C" and then release the knob "B".

TARTING THE TRACTOR ENGINE

1. Start the tractor engine, leave it at idle and engage the PTO.

2. Gradually accelerate the engine to the maximum number of revolutions. For proper operation, the

machine must be used with the tractor PTO at 540 rpm.

HREDDING

1. Insert the branches to be shredded inside the hopper. The machine will self feed so it is not necessary

to push the branches.

2. Do not hold the branches with your hands to avoid injuries and abrasions.

ND OF WORK

1. Before disengaging the PTO, let the machine idling for a few minutes so that all the material inside is

expelled.

2. WARNING: after disengaging the PTO, the rotor will rotate by inertia for a few moments. Wait for it to

come to a complete halt before performing any other operation.

Inhaltsverzeichnis

Beliebte Aktenvernichter Handbücher anderer Marken

Swingline

Swingline STACK-AND-SHRED200X&200XL 60X Bedienungsanleitung

GBC

GBC ShredMaster CC055 Bedienungsanleitung

UNITED OFFICE

UNITED OFFICE UAV 190 A1 Bedienungsanleitung

UNITED OFFICE

UNITED OFFICE UAV 190 A1 Bedienungsanleitung

Rexel

Rexel Optimum AutoFeed+ 45X Bedienungsanleitung

Martin Yale

Martin Yale 227284S1 Bedienungsanleitung

Bonsaii

Bonsaii DocShred C223-A Bedienungsanleitung

HSM

HSM Pure 740 max Bedienungsanleitung

TRU RED

TRU RED TR-BMC20A Bedienungsanleitung

Fellowes

Fellowes 50S Bedienungsanleitung

GBC

GBC SHREDMASTER 1236SE Bedienungsanleitung

Gude

Gude GH 2600 P Bedienungsanleitung

Ativa

Ativa DQ80M Bedienungsanleitung

Q-Connect

Q-Connect Q8CC Bedienungsanleitung

Fellowes

Fellowes POWERSHRED C-325CI Bedienungsanleitung

Olivetti

Olivetti Privacy 5000C Kurzanleitung

UNITED OFFICE

UNITED OFFICE UAV 190 A1 Bedienungsanleitung

Dahle

Dahle paperSAFE 22022 Bedienungsanleitung