2 www.beyondledtechnology.com
Table of Contents
Table of Contents................................... 2
Safety Information.................................. 2
Warranty.......................................... 2
Installation ...................................... 3-4
Safety Information
For your safety, always remember to:
□Turn o the power supply at the fuse or circuit breaker box
□
reliable starting.
□Double-check all connections to be sure they are
tight and correct.
□Wear rubber soled shoes and work on a sturdy
wooden ladder.
□Account for small parts and destroy packing material, as these
may be hazardous to children.
circuit breaker. It is also designed to be installed in accordance with
local electrical codes. If you are unsure about your wiring, consult a
electrical code.
WARNING: RISK OFSHOCK. House electric current can
causepainful shock or serious injury unless handled properly.
CAUTION: Turn o themain power at the circuitbreaker
NOTICE: All electrical connections must be in accordance with local
and National Electrical Code (N.E.C.) standards. If you are unfamiliar
with proper electrical wiring connections obtain the services of a
sure that no parts are missing by referencing the illustrations on the
installation instructions.
Warranty
This product is warranted to be free from defects in workmanship and materials for up to 5 years from date of purchase. If it fails to do so,
please
contact
Beyondledtechnology
at
[email protected] or
call
1(866)
786-1117
for
instructions
on
replacement.
Do not return the product to the store.
circuits. Suitable for damp locations. Before installing
-
-
trical wiring experience, please refer to a do-it-your -
-
tions must be in accordance with Local and National
Electrical Code (NEC) Standards. Reliable operating
level dimming, increase light level. Compatible with
most dimmers including Leviton 6681-IW, Lutron
S-600P and Lutron DVCL-153. Dimmable to 10% with
most dimmers.
FCC STATEMENT
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) This device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may
cause undesired operation. Note: This equipment has been tested and
found to comply with the limits for a Class B digital device, pursuant to
part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment o and on,
the user is encouraged to try to correct the interference by one or more of
the following measures: Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver. Connect the
equipment into an outlet on a circuit dierent from that to which the
receiver is connected. Consult the dealer or an experienced radio/ TV
technician for help.
