BFAudio B&W 79A Bedienungsanleitung

InstructionManual

Professional Karaoke Processor

Notice

Function introduction

Catalogue

Thanks for your support to buy our item!

To use this processor certainly, please read this manual at first .And please

keeping this manual well for the future use.

The power socket and plug may will different from this system at some districts

or countries. However, there is a same way to operate and connect this

equipment.

Attention: this equipment is an electric appliance. To avoid the danger of electric

shock, please dont take this equipment apart except the professional

technical maintenance personnel.

To make this equipment working normally, please dont clog the before and

after heat dissipation.

Dont open this equipment cover except the professional.

Dont open this equipment cover

except the professional.

5.1 Decode, 2channels adjustable MIC and music dynamic equilibration;

With the function of speaker processing, means the main channel, subwoofer, center and Aux can be

adjusted independently;

Full Parametric Equalization ;( 10 sections of music and 15 sections of MIC)

Easy and intuitive operated interface is controlled by computer absolutely, supporting Sent and

Saves as.

Unique parametric equalization for echo/mixing effect (shift PEQ/LSH/HSH)

Auxiliary channel music (including subwoofer) and MIC parameter can be adjusted independently;

Have delay function for each channel to adapt different house type and different speaker setting;

The fifth-generation scheme of feedback inhibition;

Independently developed new circuit and broadband sound; the high speed CUP is processing it

more accurately.

Have the function of recording output and the output parameter can be controlled independently;

Shift the mode of administrator and user to make sure the system on safe.

Notice, function instruction and catalogue

Illustrate the function of front-panel

Illustrate the function of back-panel

Illustrate the function of processor menu

Name and function of each part about remote-control

Illustrate the function connecting

Accessory

The Hookup of system

Performance index

5-11

11-19

21 22

22 RS232

MUSIC

ECHO

CEN/SUR

SAVE

SYSTEM

DOWN

CONTROL

MAIN/SUB

UP/ESC

MODE

Input port for MIC 1

Input port for MIC 2

Input port for MIC 3

Control volume for MIC 1/A, rotate left to get lower and rotate right to get louder.

Control volume for MIC 2/A, rotate left to get lower and rotate right to get louder

Control volume for MIC 3/B, rotate left to get lower and rotate right to get louder

Display screen

Knob for music volume controlled, rotate left to get lower and rotate right to get louder

Knob for effect volume control, rotate left to get lower and rotate right to get louder

Knob for MIC volume controlled, rotate left to get lower and rotate right to get louder

Set the parameter of MIC

Set the parameter of Music

Set the parameter of Echo and mixing

Set the parameter of Main channel and Subwoofer

Set the parameter of Center and Surround

Save the data, long press for presetting call

Set the parameter for system

Set the down menu on display, the cursor is flashing down when pressing.

Set the up menu on display, the cursor is flashing up when pressing / Long press to escape.

Function knob. Left and right knob can be adjusted when setting each parameter

Shift mode1-3

RS232 serial communication interface

Illustrate the function of front-panel

4 5 6 7 8 9 10 11 12 13 14

Illustrate the function of back-panel

Port for power core

Power switch

Optical fiber input

Input port for audio signal 1

Input port for audio signal 2

Recording output port (parameter is controlled by surrounding channel)

Balance right main channel signal output

Balance left main channel signal output

Balance center channel signal output

Balance Subwoofer channel signal output

Balance Surrounding right channel signal output

Balance Surrounding left channel signal output

Jack for MIC B

Jack for MIC A

Radiator fan (Dont cover it)

MICAT:45msRT:x16

Gain:+12.OdBQ:1.00

MIC:20LSEQ:20200Hz

Gain:+12.OdBQ:1.00

MICFeedback

Mode:OFFG:7.5dB

MICHPF:24besse

FREQ:20.1HzQ:Lock

Togethertodebug

MICAANDMICB:Yes

MICLPF:24besse

FREQ:20200HzQ:Lock

MICNoisegateRT:x16

LU:89dBAT:1.40ms

Illustrate the function of processor menu

Set up the parameter for MIC

Together to debug MIC A and MIC B yes or not

Select the feedback mode:

OFF/1/2/3/4 Five modes

Input Gain: -10--+10dB

Multiple types of filter can be selected

MIC high pass: adjusted range 0-20600Hz

Multiple types of filter can be selected

MIC low pass: adjusted range 0-20600Hz

Straight through setting PEQ for15 sections MIC, Prompt Pass

Which section of MIC PEQ is selected

Select the type of filter: PEQ LSEQ HSEQ

Select the adjusted frequency for MIC PEQ

Select Q-value of MIC PEQ

Adjust the electric level of MIC PEQ

Set the start-up times of MIC compression limit

Set the release times of MIC compression limit

Set the compression ratio of MIC compression limit

Set the start-up electric level of MIC compression limit

Release time for MIC noise gate

Start-up time for MIC noise gate

Start-up electric level for MIC noise gate

DEQ1AT:45msRT:x16

Gain:+12.OdBQ:1.00

<DEQ>:1PEQ:20200Hz

G:+12.OQ:1.00[OFF]

MusicToneChange

Music#:0

MusicHPF:24besse

FREQ:20.1HzQ:Lock

MusicLPF:24besse

FREQ:20200HzQ:Lock

Music:10LSEQ:20200Hz

Gain:+12.OdBQ:1.00

Illustrate the function of processor menu

Set the music parameter

Change the Music tone -7--+7

Multiple types of filter can be selected

Music high passes: adjusted range 0-20600Hz

Multiple types of filter can be selected

Music low passes: adjusted range 0-20600Hz

Setting through 10 sections Music PEQ, Prompt Pass

Which section of Music PEQ is selected?

Select the type of filter: PEQ LSEQ HSEQ

Select the adjusted frequency for Music PEQ

Select Q-value of Music PEQ

Adjust electric level of Music PEQ

Setting through 3 sections Music dynamic PEQ, prompt pass

Which section of music dynamic PEQ is selected

Select the type of filter: PEQ LSEQ HSEQ

Select the adjusted frequency for Music dynamic PEQ

Working type of balance Music dynamic

Select the Q-value of balance Music dynamic

Adjust the electric level of balance Music dynamic

Set the point of Music dynamic

Set the start-up time of compression limit for Music dynamic

Set the release time of compression limit for Music dynamic

Set the compression ratio of compression limit for Music dynamic

Set the start-up time of compression limit for Music dynamic

EchoAEFFLeve1:+100

DirectLeve1:+0

EchoAPreDelay:0ms

Delay:200msRept:60%

EchoADelayR:0%

PreDelayR:0%

EchoAHPF:18dBBesse

FREQ:19.7HZQ:0.40

EchoALPF:36dBLink-

FREQ:20600HzQ:0.40

EchoA:1PEQ:20.5Hz

Gain:+0.0dBQ:1.00

EchoBEFFLeve1:+100

DirectLeve1:+0

EchoBPreDelay:0ms

Delay:200msRept:60%

EchoBDelayR:0%

PreDelayR:0%

EchoBHPF:18dBBesse

FREQ:19.7HZQ:0.40

EchoBLPF:36dBLink-

FREQ:20600HzQ:0.40

EFF EchoAndReverb

Switch:EchoA+Reverb

ReverbDelay:2625ms

PreDelay:20ms

ReverbLeve1:+1.00

DirectLeve1:+0

ReverHPF:36dBLink-

FREQ:19.7HzQ:0.40

ReverLPF:36dBLINK-

FREQ:20600HzQ:0.40

Rever:1PEQ:20.5Hz

Gain:+0.0dBQ:1.00

EchoA:1PEQ:20.5Hz

Gain:+0.0dBQ:1.00

Illustrate the function of processor menu

Set the parameter of effecter

Select the echo and reverb mode:

Echo A+ Echo B

Phase

Echo delay time

Echo HPF Frequency

Echo EFF level

Echo Direct level

Echo EFF Pre Delay

Echo Repeat ratio

Delay time for right channel

Right channel delaynel

Echo High pass filter

Echo Q-value:0.4-128

Echo Low pass filter

Echo Q value:0.4-128

Frequency

Set though 7 sections Echo EFF PEQ, prompt: pass

Which section of Echo EFF PEQ is selected

Select the type of filter: PEQ LESQ HSEQ

Select the adjusted frequency for Echo EFF PEQ

Select the Q-value of Echo EFF PEQ

Adjust the electric level of Echo EFF PEQ

Phase

electric level of Echo EFF

electric direct level of Echo

Echo EFF Pre Delay

Echo Repeat ratio

Delay time for right channel

Right channel Pre-delay

Echo High pass filter

Echo Q value:0.4-128

Echo Low pass filter

Echo LPF Frequency Echo Q value:0.4-128

Delay time for

Echo

Echo HPF Frequency

Set though 7 sections Echo EFF PEQ, prompt: pass

Which section of Echo EFF PEQ is selected

Select the type of filter: PEQ LESQ HSEQ

Select the adjusted frequency for Echo EFF PEQ

Select the Q-value of Echo EFF PEQ;

Adjust the electric level of Echo EFF PEQ

Reverb electric level

Reverb Direct electric level

Reverb time

Reverb Pre-delay time

Reverb High pass filter

Reverb Q-value: 0.4-128

Reverb Low pass filter

Reverb Q value

Reverb LPF Frequency

Echo HPF Frequency

Phase

Set though 7 sections Reverb EFF PEQ, prompt: pass

Which section of Reverb EFF PEQ is selected

Select the type of filter: PEQ LESQ HSEQ

Select the adjusted frequency for Reverb EFF PEQ

Select the Q-value of Reverb EFF PEQ

Adjust the electric level of Reverb EFF PEQ

Togethertodebug

MainLeft/Right:Yes

MainMu:+100Mi:+100

MainHPF:24besse

FREQ:20.1HzQ:Lock

MainLPF:24besse

FREQ:20200HzQ:Lock

Main:1PEQ:20000Hz

MainAT:45MSRT:X8

MainDelayL 0ms

MainMuteL:NO

SUBMU:+100MI:+100

WorkModeSelect

Manual:sing

EchoA:+76Rever:+0

Gain:+0.0dBQ:1.00

LU:+14dBRatio:1.0

DelayR 0ms

MuteR:NO

EchoA:+100Rever:+100

SUBHPF: 4besse2

FREQ: 0.1HzQ: ock2 L

SUBLPF: 4besse2

FREQ: 0200HzQ: ock2 L

Sub:1PEQ:20000Hz

Gain:+0.0dBQ:1.00

SubAT:45MSRT:X8

LU:+14dBRatio:1.0

SubDelay: 0ms

Mute: NO

Illustrate the function of processor menu

Set the parameter of Main/Sub output

Combined setting the right and left,

below is the combined setting menu.

Separated right and left will get more

word like L or R

can choose the mode of DISCO or SING

under manual mode

Shift the working mode: manual/ auto

(Under the auto mode, it will shift according

to whether the MIC have signal or not)

Music volume

Music Phase

MIC phase

MIC volume

Echo A phase Reverb electrical level

Echo A volume Reverb phase

Multiple types of filter can be selected

High pass: adjusted range0-20600Hz

Multiple types of filter can be selected

Low pass: adjusted range0-20600Hz

Set though 10 sections PEQ, prompt: pass

Which section of PEQ is selected

Select the type of filter: PEQ LESQ HSEQ

Select the adjusted frequency for PEQ

Select the Q-value of PEQ

Adjust the electric level of PEQ

Set the start-up time of compression limit

Set the released time of compression limit

Set the ratio of compression limit

Set the electric level of compression limit

Left Delay

Right Delay

Left Mute

Right Mute

Music volume

MIC phase

Music Phase

MIC volume

Reverb electrical level

Echo A volume

Reverb phase

Multiple types of filter can be selected

High pass: adjusted range0-20600Hz

Multiple types of filter can be selected

Low pass: adjusted range0-20600Hz

Set though 10 sections PEQ, prompt: pass

Which section of PEQ is selected

Select the type of filter: PEQ LESQ HSEQ

Select the adjusted frequency for PEQ

Select the Q-value of PEQ

Adjust the electric level of PEQ

Set the released time of

compression limit

Set the ratio of compression limit

Set the electric level of

compression limit

Delay

Mute

Set the start-up time of

compression limit

Togethertodebug

MainLeft/Right: esY

WorkModeSelect

Manual:sing

CENMu:+100Mi:+100

EchoA:+76Rever:+0

CENHPF:24besse

FREQ:20.1HzQ:Lock

CENLPF:24besse

FREQ:20200HzQ:Lock

CEN:1PEQ:20000Hz

Gain:+0.0dBQ:1.00

CENAT:45MSRT:X8

LU:+14dBRatio:1.0

CENDelay: 0ms

Mute: NO

SURMU:+100MI:+100

EchoA:+100Rever:+100

SU LPF: 4besseR 2

FREQ: 0200HzQ: ock2 L

SURHPF: 4besse2

FREQ: 0.1HzQ: ock2 L

SUR:1PEQ:20000Hz

Gain:+0.0dBQ:1.00

SURAT:45MSRT:X8

LU:+14dBRatio:1.0

SURDelayL 0ms

SURMuteL:NO

DelayR 0ms

MuteR:NO

SEN/SUR

Illustrate the function of processor menu

Set the parameter of Center and Surround

can choose the mode of DISCO or SING

under manual mode

Shift the working mode: manual/ auto (Under the

auto mode, it will shift according to whether the

MIC have signal or not)

Music volume

Music Phase

MIC phase

MIC volume

Echo A phase Reverb electrical level

Echo A volume Reverb phase

Multiple types of filter can be selected

High pass: adjusted range0-20600Hz

Multiple types of filter can be selected

Low pass: adjusted range0-20600Hz

Set though 10 sections PEQ, prompt: pass

Which section of PEQ is selected

Select the type of filter: PEQ LESQ HSEQ

Select the adjusted frequency for PEQ

Select the Q-value of PEQ

Adjust the electric level of PEQ

Set the start-up time of

compression limit

Set the released time of

compression limit

Set the ratio of compression limit

Set the electric level of compression limit

Delay

Mute

Combined setting the right and left, below is the combined setting menu.

Separated right and left will get more word like L or R.

Music volume

MIC phase

Music Phase

MIC volume

Reverb electrical level

Echo A volume

Reverb phase

Multiple types of filter can be selected

High pass: adjusted range0-20600Hz

Multiple types of filter can be selected

Low pass: adjusted range0-20600Hz

Set though 10 sections PEQ, prompt: pass

Which section of PEQ is selected

Select the type of filter: PEQ LESQ HSEQ

Select the adjusted frequency for PEQ

Select the Q-value of PEQ

Adjust the electric level of PEQ

Set the start-up time of compression limit

Set the released time of compression limit

Set the ratio of compression limit

Set the electric level of compression limit

Left Delay

Right Delay

Left Mute

Right Mute

Modesave

SAVE

Illustrate the function of processor menu

Set the parameter Save and Call

Step 1. Press the button (SAVE) , prompt:

Step 2. Press the button (UP), and the cursor is flashing, prompt:

Step 3. Rotate the knob (SET), choosing the place for save and

then press button (SAVE) again, prompt:

Step 4. Press button (DOWN) to ensure the save, prompt:

Press button (UP) to cancel the save and back to the

standby display

Step1. Long press button (SAVE), prompt:

Step 2. Press button (UP), and the cursor is flashing, prompt:

Step 3. Rotate the knob (SET), choosing which parameter needs

to be called and then press button (SAVE) again, prompt:

Step 4. Press button (DOWN) to ensure the call, prompt:

Inhaltsverzeichnis

Andere BFAudio Computerhardware Handbücher

BFAudio

BFAudio K-306N Bedienungsanleitung

Beliebte Computerhardware Handbücher anderer Marken

EMC2

EMC2 VNX Series Betriebsanleitung

Panasonic

Panasonic DV0PM20105 Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Bedienungsanleitung

Gigabyte

Gigabyte B660M DS3H AX DDR4 Bedienungsanleitung

Raidon

Raidon iT2300 Bedienungsanleitung

National Instruments

National Instruments PXI-8186 Bedienungsanleitung

Hauppauge

Hauppauge WinTV-HVR-2250 Bedienungsanleitung

Kontron

Kontron CP6002 Bedienungsanleitung

Manhattan

Manhattan 702843 Bedienungsanleitung

Aphex

Aphex 230 Bedienungsanleitung

AMD

AMD Phenom II Betriebshandbuch

Intel

Intel NUC 12 Pro Bedienungsanleitung

dbx

dbx Zone Pro 1260 Bedienungsanleitung

Galaxy

Galaxy GHDX2-2430S-24F4D Bedienungsanleitung

Intel

Intel AXXRMFBU4 Bedienungsanleitung

Kontron

Kontron DIMM-PC/MD Bedienungsanleitung

ST X-NUCLEO-SAFEA1B Betriebsanleitung

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Bedienungsanleitung