Bhaptics Tactosy Bedienungsanleitung

Tactosy is a wearable sleeve that provides haptic feedback on your arm

surface. Using a total of 20 discrete vibro-tactile motors, it creates a

continuous form of tactile sensation. It aims to enhance users’ experience in

an audio-visually immersive environment.

UNBOXING

PRECAUTIONS

Before using the Tactosy, please read this manual carefully.

Wearable haptic sleeve

Model

Size

Weight

Connection

Battery

Charging

Tactosy (BHTTS0100)

5.5 - 14 inch (arm circumference)

250g

Bluetooth Low Energy technology

3.8V, 2900mAh, 11.02Wh

5V, 2A max

* * The number of Bluetooth dongle and USB cables is subject to change once purchased.

Safety and Warnings

* Avoid contact with bare skin.

* Keep this product out of reach of small children.

* Do not fasten the body straps excessively.

* Never disassemble or modify the product.

* Do not apply excessive force to the button.

* Do not expose the device to extreme weather conditions.

* Put the device only on the arms and legs.

Care and Handling

* Do not throw, drop, or expose the device to physical impact.

* Keep Tactosy away from liquids, it is not water-resistant.

* Do not store Tactosy in extreme cold or hot areas.

* Do not use chemicals or cleaning solvents on the device.

* Do not leave the device on charge when not in use, as overcharging

may shorten the battery life.

Tactosy(Main Controller+Strap)

x 1

USB C-type Cable

x 1

Manual

x 1

Bluetooth Dongle

x 1

Downloading software

Downloads for the bHaptics Player software are available on our website,

Pairing

With the device and PC bluetooth turned on, and with the BLE dongle

plugged into the PC, if needed, find the Tactot icon on the Player interface.

Hover over the icon and click on the ‘pair’ button to find and pair the device.

*Unpairing

If a device has been paired before, it will connect automatically when turned on. To

unpair, hover over the paired device’s icon and find the ‘unpair’ button.

Testing haptic feedback

The draw function can be found in the settings tab.

Enjoy and feel the next-generation haptic suit.

CONNECTING THE DEVICE

BHAPTICS PLAYER

bHaptics Plugin l We support plugins for

Unity3D and Unreal Engine, which can be

found in the Asset Store and Marketplace.

Please refer to the plugin manuals for how to

use them. For any other SDKs, please contact

us directly.

bHaptics Player l Desktop software, used for

the optimization and control of your experience

with TactSuit. Acting as a link between the

device, application, and the bHaptics Designer,

it controls the bluetooth connections, device

settings, and more.

bHaptics Designer l Web-based haptic

feedback editing tool. Utilizing this tool, you

can easily create a haptic feedback pattern

without using a single line of code. Just like

adding a subtitle to a video, you can add a

haptic pattern to a video, a game, etc.

DESIGNER

Path Mode

Draw lines within the dotted

section to create continuous

haptic feedback.

Dot Mode

Select specific

vibro-tactile motors to

activate.

Contact our email for customer support.

[email protected] / www.bhaptics.com

www.bhaptics.com.

*Firmware update

When an update is available, a notification

will pop up on the settings button.

The update can be found in the settings tab.

Keep the firmware updated to its latest

version. For more information visit our site.

*To use the Designer, enter the URL(https://designer.bhaptics.com) on your PC and Log-In.

(Sign-up is required)

Unpair AllPing All

Vibro-tactile Motors

FACE

Strap

TACTOSY SLEEVE

OUTER FACE

CONNECT

STEP

Strap

Strap Connection Loop Main Controller

Battery

Connection port

Main Controller

Strap Holder

On/Off Switch

(LED Status Indicator)

LED Color Indication

“RED” On

BLE status

Sleep O

Advertising

Connected

Charging

“GREEN” blinking

“RED/YELLOW” blinking

“GREEN/BLUE/CYAN” On

“YELLOW/MAGENTA/WHITE” On

Connecting device

Turning Tactosy on.

Press the On/Off button on the device to turn it on.

The device will blink to indicate it is ready for bluetooth connection.

Putting on the Tactosy

Put the Tactosy on your forearm and tighten the strap accordingly.

For optimum experience, minimize the loose space between your

arm and the strap.

Hold the strap

and pull tight.

Attach the velcro to the

inside of your forearm

with the strap pulled tight.

* Size Control

To account for more variation of

sizes, unfold or fold the end of the

strap before securing the velcro.

*Tips for use

- Using the bHaptics Player, users may test various vibration levels of vibro-tactile

motors to optimize the Tactosy experience.

- Keep track of the remaining battery through the bHaptics Player to prevent sudden

shutdown of the Tactosy.

* If Tactosy band does not fit comfortably,

adjust the top strap to fiind a better fit.

WARNING & PRECAUTION

This user manual is the basic manual for installation and operation and made for correct

application of BHTTS0100 wireless product with CDMA technology. All users who

install and use this 2.4/5G Dual-band RF Transceiver Module products must read and understand

the contents of this manual. In addition, user must observe all safety warnings and precautions in

order to prevent from any problem or malfunction and to avoid from physical danger or damage

to property of the customer.

Be sure to keep it after installation.

•This User manual describes only for our 2.4/5G Dual-band RF Transceiver Module products and

can not be used without permission at any time.

•Please note that manufacturer is not responsible for any loss or damage caused by using this

product for any purpose other than its intended use.

•Do not disassemble the equipment at any time to change the function or repair BHAPTICS INC.

You must contact the place of purchase and seek professional help.

•Note: All BHTTS0100 wireless products comply with the regulations for wireless digital devices

in the KC, CE, and FCC regulations.

•BHAPTICS INC wireless CDMA products may generate, use and radiate radio frequency energy

and, if not installed and used in accordance with the instructions, may cause interference with

certain other wireless communications.

•BHTTS0100 wireless products may cause interference in all wireless installation

environments. If interference from radio (TV, radio) reception occurs due to the use of wireless

CDMA products, the following problems may be solved.

1) Change the direction or position of the transmit / receive antenna.

2) Separate the distance between the wireless device and the receiver (at least 15 meters away).

3) Connect the device to an outlet on a different line than the one to which the receiver is connected.

4) Contact your dealer or a wireless device / CCTV technician for assistance.

5) Wireless connection may be disconnected by various external wireless circumstances at each places.

Precautions before Installation (Warnings and Cautions for Safety)

Be sure to read and understand the contents of this manual before using BHTTS0100

Wireless products in order to eliminate safety and product problems and malfunctions.

Please read this manual carefully to ensure that the product is used correctly to protect the

user's physical safety and property damage.

WARNING: Caution is required and incorrect installation may cause problems.

WARNING: This is expected to result in death or serious injury.

CAUTION: This is a potential for injury or material damage to persons.

Federal Communications Commission (FCC) Statement

15.21 You are cautioned that changes or modifications not expressly approved

by the party responsible for compliance could void the user’s authority to

operate the equipment.

This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions:

1) this device may not cause interference and

2) this device must accept any interference, including interference that may

cause undesired operation of the device.

15.105(b) This equipment has been tested and found to comply with the limits

for a Class B digital device, pursuant to part 15 of the FCC rules. These limits

are designed to provide reasonable protection against harmful interference in

a residential installation. This equipment generates, uses and can radiate radio

frequency energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment off

and on, the user is encouraged to try to correct the interference by one or

more of the following measures:

•Reorient or relocate the receiving antenna.

•Increase the separation between the equipment and receiver.

•Connect the equipment into an outlet on a circuit different from that to

which the receiver is connected.

•Consult the dealer or an experienced radio/TV technician for help.

The input voltage of wireless BHTTS0100 products

should be connected 3.3V DC and the input current should be

supplied more than 800mA. The power outlet must be grounded and

never used with a heating device, air conditioner, magnetic field

and radio wave generator Never use it with an electric motor, a

generator, an antenna using another frequency, or a radio wave

generator.

To prevent damage caused by lightning accident or external

electric shock, be sure to use protective equipment or protection

device together.

It may cause fire, electric shock and personal injury.

Never disassemble or disassemble the wireless BHTTS0100

product, and do not repair or modify it by yourself

for any reason.

*It may cause fire and electric shock.

Be sure to turn off the power of the wireless BHTTS0100

device before connecting the camera or antenna, and never connect

additional equipment while the product is running. Connect all

equipment and devices, then power on.

*It may cause fire, electric shock and personal injury.

The input voltage of wireless BHTTS0100 products

should be connected 3.3V DC and the input current should be

supplied more than 800mA. The power outlet must be grounded and

never used with a heating device, air conditioner, magnetic field

and radio wave generator Never use it with an electric motor, a

generator, an antenna using another frequency, or a radio wave

generator.

Wireless BHTTS0100 products should never be

installed in places with high humidity, dust, heat, etc. Be sure to

check environment of installation site beforehand to prepare

measures for protection against moisture, water and heat.

* It may cause fire, electric shock, lightning accident, personal

injury.

In any of the following cases, immediately turn off the power to the unit, and then contact the

place of purchase for repair.

1) If the power supply, connector, or outer shape is damaged.

2) When rain or water enters the equipment

3) If liquid has been spilled on the device or an abnormal substance

4) If the unit does not operate as described in this manual (operation may be damaged if

operated in a manner other than those specified in the Manual).

5) If the unit is dropped or thrown, the product is damaged.

6) If there is a sharp change in performance

7) Damage caused by natural disasters such as lightning, user mistakes, errors or carelessness

will be repaired by the user at their own expense even during the warranty period.

Dieses Handbuch passt für folgende Modelle

Andere Bhaptics Sprecher Handbücher

Bhaptics

Bhaptics Tactot DK1 Bedienungsanleitung

Beliebte Sprecher Handbücher anderer Marken

argon audio

argon audio IE20 Bedienungsanleitung

Denon

Denon SC-N7 Bedienungsanleitung

Gemline

Gemline Ace 3952 Bedienungsanleitung

Focal

Focal ON WALL 300 Bedienungsanleitung

HEADRUSH

HEADRUSH Maximus HRSP 5024 Bedienungsanleitung

SoundLogic

SoundLogic BCCS-6/6395 Bedienungsanleitung

Peavey

Peavey DTH 218 Bedienungsanleitung

Avantree

Avantree Pluto Air Bedienungsanleitung

Morel

Morel Integra Series INTEGRA OVATION 4 Bedienungsanleitung

Oppo

Oppo SONICA Bedienungsanleitung

Bose

Bose SoundLink Wireless Music System Bedienungsanleitung

Rocksteady

Rocksteady Stadium Bedienungsanleitung

Bowers & Wilkins

Bowers & Wilkins 4 Bedienungsanleitung

Sonance

Sonance SONOS OUTDOOR Series Bedienungsanleitung

Electro-Voice

Electro-Voice EVID FM4.2 Bedienungsanleitung

Pioneer

Pioneer XW-HTD630 Bedienungsanleitung

Onn

Onn BWA16AA002 Bedienungsanleitung

HP GL313AA - USB Speakers PC Multimedia Bedienungsanleitung