BI COMMUNICATIONS Lan Caster ProST Bedienungsanleitung

ENGLISH

User Manual

BI Communications

Innovation through Technology

ProProSTST

Structured Cable Tester

& TDR Fault Locator

Structured Cable Tester

& TDR Fault Locator

ProPro

BI Communications

Innovation through Technology

18:24

LanCaster

Pro ST

03:11:05

TIA568 STP Vp=79%

SECTION 1 INTRODUCTION

SECTION 2 PRODUCT FEATURES

SECTION 3 SPECIFICATIONS

SECTION 4 FIRST OPERATIONS

SECTION 5 USING THE Lancaster Pro ST

1.1 Receiving Shipment ...................................................6

2.1 Description ............................................................7

2.2 Lancaster Pro ST Features ........................................7

4.1 Preparing Lancaster Pro ST For Use ........................11

4.2 Menu Architecture ......................................................12

4.3 Selecting Language ...................................................13

4.4 Set Unit Of Measure ..................................................13

4.5 Set Time And Date .....................................................13

4.6 Select Wiring Type .....................................................13

4.7 Set Volocity Of Propogation .......................................13

4.8 Adjusting Contrast .....................................................14

4.9 Setting Auto Shutdown ..............................................14

4.10 Address Settings ........................................................14

4.11 Volocity Of Propogation .............................................15

5.1 T.N.V. (Telecom Network Voltage) .............................16

5.2 Services Detection .....................................................17

5.3 General Operation .....................................................17

5.4 Test Pass Screen .......................................................19

5.5 Test Failed Screen .....................................................20

5.5.1 Open And Short Fault ................................................20

5.5.2 Reversed And Split Pair Fault ....................................21

5.5.3 Multipul Faults ............................................................22

5.5.4 Missing Remote .........................................................22

5.6 Cable Length Measurement ......................................23

5.7 Tone Generator ..........................................................24

5.8 Backlight ............................................................24

TABLE OF CONTENTS

SECTION 6 DOWNLOADING TO P.C.

SECTION 7 WIRING PROTOCOLS

SECTION 8 MAINTENANCE

6.1 Linking Lancaster Pro ST To PC..................................25

6.2 Selective Download ...................................................25

6.3 Full Download ............................................................25

6.4 Erasing Memory .........................................................26

TABLE OF CONTENTS

War ning

●This instrument meets the safety requirements of IEC61010-1:

1995.

●The Lancaster Pro ST is designed for use on de-energized

circuits only.

●Connection to line voltages will damage the instrument and

could be hazardous to the operator.

●This instrument is protected against connection to telecom

network voltages according to EN61326-1.

●Safety is the responsibility of the operator.

International Electrical Symbols

This symbol signiﬁes that the instrument is protected by double or

reinforced insulation. Use only speciﬁed replacement parts when

servicing the instrument.

This symbol on the instrument indicates a WARNING and that

the operator must refer to the user manual for instructions before

operating the instrument. In this manual, the symbol preceding

instructions indicates that if the instructions are not followed, bodily

injury, installation/sample and product damage may result.

Risk of electric shock. The voltage at the parts marked with this

symbol may be dangerous.

SECTION 1-INTRODUCTION

1.1 Receiving Your Shipment

Upon receiving your shipment, make sure that the contents are consistent

with the packing list. Notify your distributor of any missing items. If the

equipment appears to be damaged, file a claim immediately with the carrier

and notify your distributor at once, giving a detailed description of any

damage.

2.1 Description

Features:

The Lancaster Pro ST, is a hand held structured cabling tester and trouble

shooter, designed for use on screened and unscreened cables. Fitted with

RJ45 connectors and wired to either TIA568 A/B, U.S.O.C or I.S.D.N

standards. It will store up to 1,000 test results for downloading to P.C to

produce an installation test report, showing time and date of test, wiring

standard, installed cable length, pass/fail result and location of site tested.

All test results for display textually and graphically along with cable length,

wiring standard, V.P, an outlet address and smart remote ID number,

audible pass/fail tone is emitted by the main unit with a red/green pass/fail

LED on the remote unit.

When plugged into an active port it will emit an audible tone if telephone

voltages are present on any of the pins and will identify 10 base T. Token

Ring and 100 Mbit connections and inhibit testing, in the presence of live

circuits an inbuilt tone generator can be selected for cable tracing.

Stores up to 1,000 test results

Complete with software for download to PC and generating test

reports

Rugged case design rated to IP54

Scratch resistant front screen

128x64 Electro luminescent backlit display

Detects open circuits, shorts, crossed wires, crossed pairs, reversed

pairs, split pairs and screen faults

Measures length of all 4 pairs and indicates distance to fault

Tone generator for cable tracing

Supports up to 16 uniquely numbered smart remote units

SECTION 2-PRODUCT FEATURES

2.2 LanCaster Features

1 RJ45 Input connector

2 Graphical L.C.D

3 Service button

4 Length test button

5 Wire map test button

6 Address settings

7 Back light button

8 Power on/off button

9 Remote ID button

10 Pass/fail test BI colour L.E.D

Buttons 3 to 6 have the following functions, when menu is selected

5-To scroll cursor arrow

3-To increment setting

4-To decrement setting

6-Return to menu

Structured Cable Tester

& TDR Fault Locator

Structured Cable Tester

& TDR Fault Locator

ProPro

BI Communications

Innovation through Technology

18:24

LanCaster

Pro ST

03:11:05

TIA568 STP Vp=79%

With nd Discrimination Technology

EDT™

Remote UnitRemote Unit

BI Communications

Innovation through Technology

Range: 500 ft (150m)

Accuracy: ±5%

Cable Types: UTP, STP, FTP & SSTP

Faults Indicated: Short Circuit Pair

Open Circuit Wire

Short Between Pairs

Split / Cross Pairs

Pair Reversals

Shield Continuity

Fault Location: Near End, Remote End, or distance

if midway

Wiring Schemes: TIA 568A/B, USOC & ISDN

Service Indication: Telephone, 10BaseT, 100Mbit+,

Token Ring

Voltage Warning: Warns of TNV (Telecom Network

Voltage) presence

Test Inhibit: Inhibits Testing in the presence of

live voltages

Tone Generator:

Tone generator (oscillating) 810Hz - 1110Hz

Battery indicator: “Gas Gauge”Bargraph

Main Unit Display: 128 x 64 pixel Graphical LCD

Fault Display: All fault and setting info displayed

textually and graphically

Display Backlight: Electroluminescent

Remote Display: Green/Red LED

Languages: English (USA and UK), German,

French, Spanish, Portuguese, Italian

SECTION 3-SPECIFICATIONS

Power Supply: 4 x 1.5V AA alkaline batteries

Auto Power Off: Selectable, disabled 1, 2, 3 minutes

or disabled

Battery Life: Standby mode >4000hrs

Continuous testing >7.5hrs

Storage Temperature: (-4 to 158°F)-20 to 70°C

5 to 95% RH non-condensing

Operating Temperature: 32 to 112°F0 to 40°C ( )

5 to 95% RH non-condensing

Main Unit Weight: 12 oz350g ( )

Main Unit Dimensions: 6.5 x 3.5 x 1.5”)165 x 90 x 37mm (

Remote Weight: (1.5 oz)40g

Remote Dimensions: 2.5 x 2.0 x 1.0”)65 x 52 x 25mm (

Safety: IEC61010-1

EMC: EN61326-1

CE: Compliant with current EU directives

ESD: EN61000-4-2

EM: EN61000-4-3

Burst: EN61000-4-4

Conducted RF: EN61000-4-6

Inhaltsverzeichnis

Andere BI COMMUNICATIONS Prüfgeräte Handbücher

BI COMMUNICATIONS

BI COMMUNICATIONS TX RANGER Bedienungsanleitung

Beliebte Prüfgeräte Handbücher anderer Marken

SMART

SMART KANAAD SBT XTREME 3G Series Bedienungsanleitung

Agilent Technologies

Agilent Technologies BERT Serial Bedienungsanleitung

Agilent Technologies

Agilent Technologies N3280A Bedienungsanleitung

Vernier

Vernier Go Direct Voltage Bedienungsanleitung

Lifeloc

Lifeloc R.A.D.A.R. Bedienungsanleitung

Fluke

Fluke T5-600 Bedienungs- und Montageanleitung

Mercury

Mercury TSL01 Bedienungsanleitung

MAHA

MAHA MBT Series Bedienungsanleitung

Fuji Electric

Fuji Electric P-61 Bedienungsanleitung

ETC

ETC SealerAtor Bedienungsanleitung

Skyfine

Skyfine ETHYWAY V2 Bedienungsanleitung

Appion

Appion G5 Twin Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 8159-0112A Bedienungsanleitung

BW Technologies

BW Technologies MicroDock II Bedienungsanleitung

Sun Nuclear

Sun Nuclear 1027 Bedienungsanleitung

Biomark

Biomark HPR LITE READER Bedienungsanleitung

Hioki

Hioki 3169-20 Bedienungsanleitung

Ashcroft

Ashcroft ATE-100 Bedienungsanleitung