Biamp Vidi 250 Original Betriebsanleitung

A: 9300 S.W. Gemini Drive Beaverton, OR 97008 USA W: www.biamp.com

PRODUCT DESCRIPTION

The Vidi 250 is a wide angle 4K camera designed for

use with video conferencing systems. Intended for use in

Huddle, small or medium conferencing rooms, the Vidi 250

has a 120° field of view, allowing everyone in the room to be

seen. The Vidi 250 uses auto framing technology to adjust

the focus and zoom to keep participants in view. The Vidi

250 can be either display mounted or wall mounted.

Beamforming

Microphones

Camera ON

Indicator Light

Privacy

Cover

FEATURES

• LED indications for camera activity

• 4K, wide angle 120° field of view

• Pan/Tilt/Zoom with 5x digital zoom

• Auto framing technology keeps participants in frame

• Multi-microphone array

• Privacy cover

• Above and below display mounts included

• Display side and wall mount options

• Optional camera control software for manual control

Kensington

Lock Socket

USB-C

Connection

Mounting

Socket

Vidi 250

Installation & Operation Guide

PRODUCT DETAILS

page 2 Installation and Operation Guide Vidi 250

CAMERA INSTALLATION

Top Mount: (attached to the camera)

1. Pull the lower arm of the mount down.

2. Position the mount onto the top of the display and push

the lower arm against the back of the device to secure.

3. Plug the USB cord into the back of the camera.

4. Remove the privacy cover and aim the camera.

5. Optional - Install Biamp Cameral Control App for

manual control.

USB-C

Connection

Top Mount

Vidi 250 Installation and Operation Guide page 3

Under-Display Plate: (included)

You must download the Biamp Cameral Control App to

control the image orientation when mounting the camera

under the display.

1. Adhere the adhesive plate to the underside of the TV or

monitor. To ensure proper adhesion, properly clean the

mounting surface and apply pressure to the mount for

30 seconds. If possible, wait 24 hours before mounting

the camera to ensure maximum bond.

2. Turn the camera and mount upside down and push the

top mount into the under-display plate clips as shown.

The camera/mount will be able to move forward and

backward slightly.

3. Plug the USB cord into the back of the camera.

4. Remove the privacy cover and aim the camera.

5. In the Biamp Cameral Control App you must choose

the "Flip" option to change the view orientation during

setup.

Under-Display Mount

3 4

page 4 Installation and Operation Guide Vidi 250

Side Mount Accessory (VMA 200-DM) typical installation:

Side Mount

1. Open the side clamps and position on the back or

side of a TV or monitor, so the arm can position

the camera beside the display. To ensure proper

adhesion, properly clean and dry the mounting

surface. Uncover the adhesive strips and attach

mount to the display. Apply pressure to the mounts

for 30 seconds. If possible, wait 24 hours before

attaching the camera to ensure maximum bond.

2. Remove the camera from the top mount and screw it

onto the side mount until tight. Keep the privacy cover

on. Do not push down on the arm while screwing the

camera on the mount.

3. Plug the USB cord into the back of the camera.

4. Remove the privacy cover and carefully move/rotate

the arm and camera to point to the desired location.

5. Optional - Install Biamp Cameral Control App for

manual control.

3 4

Vidi 250 Installation and Operation Guide page 5

Wall Mount Accessory (VMA 200-WM) installation:

Position the wall mount on a vertical surface (wall or furniture) close to the TV or

monitor and mark the hole locations. Prepare the surface or pre-drill the holes

as necessary.

1. Attach the mount to the surface (shown with screw / anchors).

2. Remove the camera from the top mount and screw the camera onto the

wall mount until tight.

3. Plug the USB cord into the back of the camera.

4. Remove the privacy cover and carefully move the camera to point to the

desired location.

page 6 Installation and Operation Guide Vidi 250

Biamp Camera Controller software (App)

The Biamp Camera Controller provides manual control of Biamp conferencing

cameras. This software, available on both PC and Mac, is available <here> This

software will detect a connected camera and provide a preview window with

additional controls on two tabs. Information about the software and settings is

available in the help file: cameracontroller-help.biamp.com.

IMPORTANT: Do not unplug the camera

during a rmware update!

Video

• Preset saving and recall (x3)

• Manual zoom and panning (ePTZ)

• Enable autoframing

Settings

• Backlight compensation

• Image mirroring

• Image flip for under-display mounting

• Enable the microphone

• Set refresh rate (50 or 60 Hz)

• Profile (options shown below)

• Maximum zoom

• Upgrade the firmware. Firmware is available <here>.

You must download the firmware file from the biamp

website before installing the new version. The current

firmware version is shown (circled) for reference.

Note: Upgrades aren't necessary if the camera is

performing well, but are necessary to take advantage

of all the setting options (profiles, auto update, etc.)

• Enable automatic updates (via Microsoft®Windows®

- Windows PCs only). It is on by defaul when using

the Microsoft Teams®profile, but can be chosen when

using the other profiles.

Vidi 250 Installation and Operation Guide page 7

Maintenance

• Clean the camera lens with a soft non-abrasive cloth

• The mounting ball can be tightened if necessary (top mount only)

Top mount

1. Remove mount from video display, and pull ring down.

2. Rotate to tighten the ball and place camera back on the display.

A: 9300 S.W. Gemini Drive Beaverton, OR 97008 USA W: www.biamp.com

12SEP2023

Email: [email protected]

Web: support.biamp.com

Warranty: biamp.com/legal/warranty-information

Safety & Compliance: biamp.com/compliance

Microsoft, Microsoft Teams, and Windows are trademarks of

the Microsoft group of companies.

Zoom is a trademark of Zoom Video Communications, Inc.,

registered in the U.S. and other countries.

Google Meet™ and Hangouts are trademarks of Google LLC.

Inhaltsverzeichnis

Andere Biamp Konferenzsystem Handbücher

Biamp

Biamp TesiraFORTÉ X Series Bedienungsanleitung

Biamp

Biamp Devio SCX 400 Original Betriebsanleitung

Biamp

Biamp Evoko Liso Bedienungsanleitung

Biamp

Biamp devio Bedienungsanleitung

Biamp

Biamp Vidi 100 Betriebsanleitung

Biamp

Biamp TesiraFORTÉ AVB VT4 Leitfaden

Biamp

Biamp Tesira HD-1 Original Betriebsanleitung

Biamp

Biamp VBC 2500 Original Betriebsanleitung

Biamp

Biamp devio Bedienungsanleitung

Biamp

Biamp NPS-1 Bedienungsanleitung

Biamp

Biamp Crowd Mics Service-Handbuch

Biamp

Biamp TesiraFORTÉ X 400 Original Betriebsanleitung

Biamp

Biamp Devio CR-1T Bedienungsanleitung

Biamp

Biamp TesiraFORTE Original Betriebsanleitung

Beliebte Konferenzsystem Handbücher anderer Marken

Kramer

Kramer VIA GO Bedienungsanleitung

ProSoft Technology

ProSoft Technology AN-X4-AB-DHRIO Bedienungsanleitung

Sony

Sony PCS-I150 Bedienungsanleitung

Middle Atlantic Products

Middle Atlantic Products VTC Series Bedienungsanleitung

AVT

AVT MAGIC AC1 Go Bedienungsanleitung

Prentke Romich Company

Prentke Romich Company Vanguard Plus Leitfaden

Speakerbus

Speakerbus iD 712 Bedienungsanleitung

Trelleborg

Trelleborg SafePilot CAT PRO Bedienungsanleitung

Sennheiser

Sennheiser ADN Bedienungsanleitung

ADTRAN

ADTRAN NetVanta 7100 Bedienungsanleitung

AINA

AINA PTT Voice Responder Bedienungsanleitung

Yamaha

Yamaha ProjectPhone PJP-100H Bedienungsanleitung

vissonic

vissonic VLI Series Bedienungsanleitung

Panasonic

Panasonic KX-VC500 Bedienungsanleitung

Poly

Poly Trio 8300 Bedienungsanleitung

Crestron

Crestron Mercury CCS-UCA-SMK Maßzeichnung

Tenveo

Tenveo ALL-IN-ONE Bedienungsanleitung

AXIWI

AXIWI AT-350 Bedienungsanleitung