Biamp Tesira EX-AEC Bedienungsanleitung

Audio Expanders

EX-AEC, EX-IN, EX-OUT & EX-IO

OPERATION MANUAL

April 2019

AUDIO EXPANDER PRODUCT DESCRIPTION

The Tesira® EX-IN, EX-AEC, EX-OUT, and EX-IO are half-rack expander units for use with Tesira SERVER, SERVER-

IO, and TesiraFORTÉ AVB devices. Each expander provides a total of 4 channels of analog audio. The EX-IN is a 4-

channel mic/line level input expander, and the EX-AEC is a 4-channel mic/line level input expander with AEC (acoustic

echo cancellation). The EX-OUT is a 4-channel mic/line level output expander, and the EX-IO provides two channels of

mic/line level input and two channels of mic/line level output. The expanders communicate with the Tesira AVB network

for audio networking, configuration and control, and are powered by PoE+.

AUDIO EXPANDER FRONT PANEL

Setup and Use

The Tesira software provides an intuitive interface for setup and programming of the audio expanders. The information

supplied by this manual relates to physical connections and device setup. For more details on software setup, please

consult the Tesira Help File.

LED Status Indicators

Four multi-color LEDs on the front panel of the device provide information about the status of the device and the greater

Tesira system.

•Power – Reports power of the host device and Front Panel Display.

•Alarm – Reports abnormal conditions local to the host device.

•Activity – Reports the activity of host device within the greater system.

•Status – Reports the status of host device.

LED Off Green Yellow Red

Power

Unit is not powered

Unit is powered

Not applicable

Alarm

No fault is active in the

device

Not applicable

Minor fault is active in

the device

Major fault is active

in the device

Activity

Not applicable

The host device is an

active part of an active

system

Not applicable

The host device is part

of an inactive system

(Audio is stopped) or

host device is not part

of a system

Status

Not applicable

Device has received its

configuration and is ready

to participate in the system

Device is ready and

waiting to receive a

configuration

Device is not ready to

receive its configuration

AUDIO EXPANDER REAR PANEL

EX-IO expander pictured. The type and number of inputs and outputs

will vary depending on expander model

1. Grounding pin

This pin is for grounding the chassis of the expander

2. AVB/Control Connection

Uses a standard RJ-45 connector with CAT-5, CAT-5e, CAT-6 or CAT-7 cabling.

This connection is for PoE+, sending and receiving AVB audio signals as well as sending and receiving data between the

expander device and the Tesira system. An expander will not operate if it is not on a network that includes a Server-Class

Tesira device.

The maximum distance between any unit and an Ethernet switch is 328 feet (100 meters).

3. Audio Connections

The connections are electrically balanced and are configured for use with shielded-twisted-pair wiring. The wires are to be

terminated in the three-pin removable

connectors according to the wiring diagram shown on the unit. The wiring diagram is also

displayed on the connectors themselves. The connectors may then be inserted into the mating connectors on the

expander. In the illustration above, channel one is shown without the

removable connector inserted.

Input connections (channels 1 or 2 on the EX-IO and channels 1-4 on the EX-IN and EX-AEC) are for

connecting analog mic or line level audio signals to the Tesira system. The connections are

balanced and can provide Phantom power if necessary by software control.

Output connections (channels 3 or 4 on the EX-IO and channels 1-4 on the EX-OUT) are for sending analog audio signals

from the Tesira system to other audio devices at either mic level or scalable line level.

Dieses Handbuch passt für folgende Modelle

Andere Biamp Extender Handbücher

Biamp

Biamp Tesira EX-UBT Bedienungsanleitung

Biamp

Biamp Tesira EX-LOGIC Bedienungsanleitung

Biamp

Biamp Tesira EX-LOGIC Bedienungsanleitung

Biamp

Biamp IMPERA CONNECT-X MP6 Montageanleitung

Biamp

Biamp Tesira EX-MOD Bedienungsanleitung

Biamp

Biamp Tesira EX-UBT Bedienungsanleitung

Biamp

Biamp Vocia VO-4 Bedienungsanleitung

Biamp

Biamp Audia EXPI Bedienungsanleitung

Biamp

Biamp TesiraCONNECT TC-5D Original Betriebsanleitung

Biamp

Biamp TesiraCONNECT Original Betriebsanleitung

Biamp

Biamp Vocia VO-4e Bedienungsanleitung

Biamp

Biamp Audia EXPI Bedienungsanleitung

Biamp

Biamp AudiaEXPI-D Bedienungsanleitung

Biamp

Biamp AudiaEXPI-4 Bedienungsanleitung

Biamp

Biamp PARLE N 100 Montageanleitung

Beliebte Extender Handbücher anderer Marken

SY HDBT-60T Bedienungsanleitung

Appsys ProAudio

Appsys ProAudio ADX-16 Bedienungsanleitung

Atlona

Atlona RS232 Bedienungsanleitung

IDK

IDK OPF-TH1000-A Bedienungsanleitung

Enable-IT

Enable-IT 824WP Bedienungsanleitung

Worx

Worx Landroid RadioLink WA0864 Technisches Datenblatt

TP-Link

TP-Link TL-WA730RE Bedienungsanleitung

Camplex

Camplex CMX-HDMI-SFPL Bedienungsanleitung

SC&T

SC&T HE03-4K Bedienungsanleitung

Samsung

Samsung SCS-26UC4 Bedienungsanleitung

Foxun

Foxun SX-GES24 Bedienungsanleitung

MuxLab

MuxLab 500771 Bedienungsanleitung

foxunhd

foxunhd SX-AEX01 Bedienungsanleitung

TERK Technologies

TERK Technologies LFIRX2 Bedienungsanleitung

Devolo

Devolo Audio Extender Handbuch

Edimax

Edimax EW-7438RPn V2 Bedienungsanleitung

Shinybow USA

Shinybow USA SB-6335T5 Bedienungsanleitung

SECO-LARM

SECO-LARM ENFORCER EVT-PB1-V1TGQ Bedienungsanleitung