Biamp Desono MASK2 Original Betriebsanleitung

A: 9300 S.W. Gemini Drive Beaverton, OR 97008 USA W: www.biamp.com

PRODUCT DESCRIPTION

The Desono MASK2 2.5" surface mount loudspeaker

delivers crystal clear sound for all your public address and

background music needs. Available in black or white, its

2.5” paper cone woofer provides high SPL and extremely

low distortion, ensuring unprecedented clarity over the

entire frequency spectrum.

Brackets supplied with the MASK2 loudspeakers allow

them to be mounted under various angles, in corners, or

on solid surfaces such as walls or ceilings.

In combination with the compact dual coil SUBLIME

subwoofer, the Desono MASK2 loudspeakers are the

perfect solution for small and medium-sized rooms that

demand superior speech intelligibility and full range music

reproduction.

FEATURES

• One of the smallest loudspeakers on the market

• IP60 rated

• 2.5” paper cone woofer

• Innovative turn/tilt bracket

• Pairs well with Desono SUBLIME subwoofer

Installation & Operation Guide

Desono™

MASK2 Loudspeaker

CAUTION: Do not attempt to use MASK2

units as full range loudspeakers. They are not

designed to reproduce bass frequencies and do not

have overload protections. Biamp recommends using

matching subwoofers (SUBLIME) and/or high-pass

filter systems. Contact Support for the recommended

components to use with MASK2 loudspeakers.

page 2 Installation and Operation Guide MASK2

MOUNTING THE SPEAKER

1. Point the center of the speaker at

the center of the listening area.

2. Test t the speaker on the

bracket to ensure the desired

angle (see Step 7) before

mounting the bracket on the

wall.

3. Using the bracket as a

template, drill the mounting

holes as shown in Figure 1.

Note: The base plate may be rotated by 45 or 90

degrees to get the maximum tilt angle in the desired

direction when installing in a corner.

4. If the speaker location is pre-wired, thread the wiring

through one of the four pre-cut cable entries on the

bracket base prior to mounting the bracket (Figure 2).

5. Mount the bracket to the surface (Figure 3). The

mounting materials for solid brick walls are included.

6. Tighten all the screws and cover with the screw

covers (Figure 4).

7. Determine the angle of the speaker by adjusting

the bracket base and the H-hook on the half-sphere

ball. The H-hook can be adjusted with or without the

speaker attached to the hook. Adjust the turning force

of the H-hook by tightening or loosening the central

screw (Figure 5).

8. Slide the rubber security piece (a) out from the back

of the speaker and slide the speaker on to the H-hook

(b) on the mounting bracket. Slide the rubber piece

back in place to lock and secure the cabinet

(Figure 6).

9. Remove the euroblock connector (a) from the

speaker and connect the speaker wires (b)

maintaining the polarity marked on the back of the

speaker: + is positive, - is negative (Figure 7).

Fully insert the bare portion of each wire into the

connector. Maintain the same color code for all of the

sound system wiring from amplier to loudspeakers.

Note: For distances up to 20 meters, 0.75 mm²

(18AWG) speaker wire can be used without loss of

performance. For longer distances use thicker wire.

Figure 6.

Attach speaker to

bracket

Figure 7.

Connect speaker

wires

Figure 2.

Guide speaker

wiring through

bracket base

Figure 3.

Mount the

bracket

Figure 4.

Tighten the

screws and

insert covers

Figure 5.

Adjust speaker

and bracket

Screw Cover

Mounting Holes

Figure 1.

Drill mounting holes

MASK2 Installation and Operation Guide page 3

CEILING MOUNTING

The MASK2CMT bracket enables installing the MASK2

loudspeaker on the ceiling.

This small metal extension piece can be installed on the

existing MASK2 wall mount.

The bracket extension enables more inclination of the

MASK2 speaker mounted on the ceiling.

CONCEPT1

8Ω 8Ω 8Ω 8Ω

4Ω4Ω

8Ω TECHNOLOGY

Features:

• dynamic high power

• stereo Hi-Fi quality

• same volume in all zones

• max four cabinets on a stereo Hi-Fi amplifier

Bracket

Extension

CAUTION: Do not attempt to use MASK2 units as

full-range loudspeakers. They are not designed to

reproduce bass frequencies and do not have overload

protections. Biamp recommends using the SUBLIME

subwoofers (or similar) and/or high-pass filter systems.

Contact Support for the recommended components to

use with MASK2 loudspeakers.

CAUTION: The overload protection system is

incorporated in subwoofers and amplifiers, NOT in

the MASK2 speaker.

page 4 Installation and Operation Guide MASK2

Connect the left output from the

power amplifier to the left input of

the SUBLIME subwoofer.

Connect the right output from the

power amplifier to the right input of the

SUBLIME subwoofer.

Connect the left satellite speaker

(MASK2) to the left output of the

SUBLIME subwoofer.

Connect the right satellite speaker

(MASK2) to the right output of the

SUBLIME subwoofer.

CONNECTING TO A SUBLIME SUBWOOFER

PAINTING THE LOUDSPEAKER

CAUTION: Although the loudspeaker is paintable,

the MASK2 grille is not removable and should not be

painted.

1. Fully mask the grille and loudspeaker face so that

all internal components will not receive any paint.

Also mask o󰀨 any input, mounting connections, and

safety labels. Don't use conventional masking tape

and NEVER use duct tape. These kinds of tape leave

adhesive residue that is di󰀩cult to remove and may

cause damage. Painter's or other low-adhesive tape

is best.

2. Spray paint with two light coats. Let all components

dry completely before reassembly.

3. Remove all of the masking materials.

CAUTION: NEVER use abrasives, gasoline,

kerosene, acetone, methyl ethyl ketone (MEK),

paint thinner, harsh detergents or other chemicals on

the loudspeaker. These chemicals and agents may

permanently damage the nish. Some are also toxic

and highly ammable.

CAUTION: Blocking the grille holes with paint

or getting any paint on the drivers or internal

parts will a󰀨ect loudspeaker performance and void the

warranty.

A: 9300 S.W. Gemini Drive Beaverton, OR 97008 USA W: www.biamp.com

Email: [email protected]

Web: support.biamp.com

Warranty: biamp.com/legal/warranty-information

Safety & Compliance: biamp.com/compliance

JUL 2021

Inhaltsverzeichnis

Andere Biamp Sprecher Handbücher

Biamp

Biamp Desono DX Series Original Betriebsanleitung

Biamp

Biamp Desono CM Series Bedienungsanleitung

Biamp

Biamp MPLT62-G Betriebsanleitung

Biamp

Biamp Desono EX Series Original Betriebsanleitung

Biamp

Biamp L Series Original Betriebsanleitung

Biamp

Biamp Desono SPA-GHH100 Bedienungsanleitung

Biamp

Biamp SPA-TR100 Bedienungsanleitung

Biamp

Biamp Desono MASK4C Original Betriebsanleitung

Biamp

Biamp P30DT Series Bedienungsanleitung

Biamp

Biamp R1 Series Betriebsanleitung

Biamp

Biamp OVO3T Bedienungsanleitung

Biamp

Biamp Desono SPA-GRB100 Bedienungsanleitung

Biamp

Biamp Desono DX-S5-UB Original Betriebsanleitung

Biamp

Biamp R2 Series Betriebsanleitung

Biamp

Biamp Desono P6 Original Betriebsanleitung

Biamp

Biamp Cambridge Qt X 300 Original Betriebsanleitung

Biamp

Biamp Desono DX-S5 Original Betriebsanleitung

Biamp

Biamp Desono C-IC6 Original Betriebsanleitung

Beliebte Sprecher Handbücher anderer Marken

argon audio

argon audio IE20 Bedienungsanleitung

Denon

Denon SC-N7 Bedienungsanleitung

Gemline

Gemline Ace 3952 Bedienungsanleitung

Focal

Focal ON WALL 300 Bedienungsanleitung

HEADRUSH

HEADRUSH Maximus HRSP 5024 Bedienungsanleitung

SoundLogic

SoundLogic BCCS-6/6395 Bedienungsanleitung

Peavey

Peavey DTH 218 Bedienungsanleitung

Avantree

Avantree Pluto Air Bedienungsanleitung

Morel

Morel Integra Series INTEGRA OVATION 4 Bedienungsanleitung

Oppo

Oppo SONICA Bedienungsanleitung

Bose

Bose SoundLink Wireless Music System Bedienungsanleitung

Rocksteady

Rocksteady Stadium Bedienungsanleitung

Bowers & Wilkins

Bowers & Wilkins 4 Bedienungsanleitung

Sonance

Sonance SONOS OUTDOOR Series Bedienungsanleitung

Electro-Voice

Electro-Voice EVID FM4.2 Bedienungsanleitung

Pioneer

Pioneer XW-HTD630 Bedienungsanleitung

Onn

Onn BWA16AA002 Bedienungsanleitung

HP GL313AA - USB Speakers PC Multimedia Bedienungsanleitung