Bibo BIBO bar Bedienungsanleitung

BIBO bar

user manual

Maximize your BIBO experience

Welcome!

Congratulations on your new BIBO bar. You are just

moments away from enjoying endless pure, boiling

and ice-cold water, at the touch of a button.

As we want you to get the best from your BIBO bar,

we ask that you read through this manual before

getting things started.

This manual is your go-to-guide for your BIBO

bar and includes practical advice and technical

information to answer any questions you may have.

However please remember that our team is just

an email or phone call away should you have any

further queries.

Visit www.bibo.co.za/contact, email

[email protected] or call 0800 00 BIBO (2426).

So let’s clink glasses and say ‘cheers!’ to many

happy and healthy drinks with BIBO.

PLEASE NOTE

The pictures and diagrams in this manual are for reference only,

please refer to your BIBO bar.

We reserve the right to make corrections or changes to the

information provided in this manual without prior notice being given.

The products, functions, structures and designs described in this

manual have been patented by our company and are thus protected

by the UK, EU, South Africa and Australia patent oces.

Version number 190901

BIBO bar - User Manual

CONTENTS

MEET YOUR BIBO bar

BIBO bar overview

BIBO bar’s touch screen interface

INSTALLING YOUR BIBO bar

Before getting started

Step-by-step guide to self installation

USING YOUR BIBO bar

Menu options and personal settings

Dispensing water

MAINTAINING YOUR BIBO bar

Replacing your BIBO bar maxi ﬁlter

Replacing your BIBO bar zapper

Cleaning your BIBO bar

Contents

TECHNICAL INFORMATION

Product speciﬁcations

Safety notes

TROUBLESHOOTING

WARRANTY

p. 4 p. 22

p. 26

p. 28

p. 29

p. 6

p. 11

BIBO bar - User Manual

CONTENTS

Meet your BIBO bar

BIBO OVERVIEW

1. Touch screen interface

2. 2.8”TFT LCD screen

3. Water outlets

4. Front panel

5. Removable Drip Tray

6. Lid

7. Refrigeration condenser

8. Hot tank switch

9. Water inlet

10. Rear panel

11. Cooling fan

12. Mains fuse

13. Power switch

14. Mains power cable

BIBO bar - User Manual

CONTENTS

Zapper status

icon

Boiling water button

(also acts as a navigation

button in the menu mode)

Super boil button

Heating

& boiling water

temperature bar

Chilling

& cold water

temperature bar

Menu button (also

acts as the save button

in menu mode)

Water outlet

indicator light (red for

hot, blue for cold)

Chilled water button

(also acts as a navigation

button in the menu mode)

Measured cup button

(also acts as a

navigation button

in the menu mode)

Lock button (also acts

as the “return” button

in menu mode)

Ambient (mixed hot

& cold) water button

Clock

(24 hour)

Automatic

on/off icon

Power saving

mode icon

Calendar

(Day - Month - Year)

Child lock

status icon

1 2 3 4 5

6 7 8 9 10

11 12 13 14 15 16

Meet your BIBO bar

THE TOUCH SCREEN INTERFACE

1 2 3 4 5 6

7 8 9 10 11 12

13 14 15 16

13 149

12 16 1115

7 2 3 4 5 6 10

UV ﬁlter

status icon

Hot water key (also

acts as “select” key in

menu mode)

Boiling water

boost key

Heating & hot water

temperature bar

Chilling & cold water

temperature bar

Menu & set key

Water outlet

indicator light (red

for hot, blue for cold)

Cold water key

(also acts as “select”

key in menu mode)

A cup of water key

(also acts as “select”

key in menu mode)

Child lock (also

acts as “return” key

in menu mode)

Ambient (mixed hot

& cold) water key

Clock

(24 hour)

Automatic

on/off icon

Power saving

mode icon

Calendar (Day -

Month - Year)

Child lock

status icon

Please note that your BIBO bar’s red Boiling Water Button (7), blue Chilled Water Button (10)

and white Measured Cup Button (11) all have arrows inside. This is because they act as scroll

buttons when navigating through the BIBO bar menu. Similarly, the Menu Button (15) and

Lock Button (12) act as a conﬁrmation and back buttons respectively when in menu mode.

Watch Video

BIBO bar - User Manual

CONTENTS

Installing your BIBO bar

BEFORE GETTING STARTED

Our experienced installation

teams are here to make sure

that your BIBO bar is correctly

installed. If you are installing

your own BIBO bar, then please

read through all the instructions

carefully, familiarising yourself

with and understanding all

the steps completely before

beginning.

If you are at all uncertain

about any of the steps, please

call us on 0800 00 BIBO (2426)

and ask to speak to one of

our experienced technical

team members.

On average, a BIBO bar

installation should take between

one hour to an hour and a half.

CAUTIONARY NOTES

Your BIBO bar weighs 17kg, so

please take care when lifting it

from its box.

The hot tank switch is clearly

labeled at the back of your BIBO

bar (See page 4, number 8).

Please ensure that you do NOT

turn the hot tank switch on

until the BIBO bar has ﬁlled

itself with water.

Switching the hot tank switch

on before your BIBO bar has

ﬁlled with water will require

a call out from our technical

team (this comes with a fee).

See page 9, point i, for more

details on this.

YOUR BIBO BAR TOOLKIT

Your BIBO bar comes with a self installation kit consisting of

a 3m length of 6mm white water supply pipe (1), a BIBO ½” “T”

connector with a ball valve (2), an easy to ﬁt right angled stem

ﬁtting (3) and a zapper key (4).

Printable Guide

Watch Video

BIBO bar - User Manual

CONTENTS

Installing your BIBO bar

BEFORE GETTING STARTED

WHERE TO PLACE YOUR BIBO bar WATER SUPPLY

The BIBO bar often takes centre

stage in the kitchen and fast

becomes the most loved and

used appliance. It is for this

reason that the choice of where

to place and display your BIBO

bar needs to be one that offers

both convenience and style.

However a few considerations

need to be taken into account

before choosing where to place

your BIBO bar.

The water pressure should be

between 4bar (58psi) and 6bar

(87psi).

Before beginning the

installation, you will need to

identify a mains cold water

supply nearby. To identify the

cold water supply, turn on

the hot tap and wait for the

ﬂowing water to get hot. Feel

both pipes under the sink. The

one hot to the touch is the hot

water supply. WARNING: the

pipe can get extremely hot and

cause burns. Please take care!

The mains cold water supply

will need to be turned

off before beginning the

installation. Often there is an

angle stop valve which will

enable you to isolate the cold

water pipe. If not, then it will be

necessary to turn off the mains

water supply to your home/

Your BIBO bar needs to be

installed in a cool, dry place

and kept away from any heat

source.

Your BIBO bar needs to be well

ventilated. In order to ensure

this, please keep the rear of the

BIBO bar a minimum of 10cm

away from the wall. Don’t install

your BIBO bar in a cupboard or

closed off space.

There will need to be a suitable

mains cold water supply nearby

(more often than not, this will

be located under your kitchen

sink or behind your dishwasher

and/or washing machine).

You will need an electrical

power supply. Your BIBO bar

comes with a standard 3-pin

(16amp) plug.

10cm

oce. Please identify where the

tap/isolation valve is located

before beginning.

Ensure that your water feed/

supply is ﬂushed out thoroughly

into a bucket until clear water

is visible with no sediment or

dirt particles in the water.

This is to ensure your BIBO

bar does not block up. Be sure

to do so especially in newly

renovated homes and oces.

Watch Video

BIBO bar - User Manual

CONTENTS

Installing your BIBO bar

STEP BY STEP GUIDE FOR SELF-INSTALLATION

1. PREPARATIONS

2. WATER SUPPLY CONNECTION

a. Decide where you will place

your BIBO bar.

b. Carefully remove your BIBO

bar from its packaging and

place it in its preferred spot on

the work surface.

c. Remove the plastic bag and

protective covering from the

cable and plug.

d. Remove the drip tray

wrapping and take out the

zapper ‘key’ from inside the

drip tray (keep this somewhere

safe - you’ll need it down

the line when replacing your

zapper).

e. Remove the protective cover

from the touch screen.

a. Isolate the mains water

supply by either turning off the

angle stop valve or turning off

the mains water supply to your

home/oce.

b. Drain as much water

as possible from the pipe

connected to the angle stop

valve before disconnecting it.

It’s useful to have a cloth close

by to dry up any spills.

c. Install the BIBO ½” “T”

connector into the mains water

supply pipe. Make sure that the

BIBO ½” “T” connector is in the

closed position. (Picture 1)

d. Connect the 6mm white

water supply pipe to the BIBO

½” “T” connector and run it to

the BIBO bar (Picture 2). You’ll

need to ﬂush the water feed out

completely into a bucket, until

the water is clear and free from

sediments or dirt particles.

e. Remove the locking clip from

the inlet water ﬁtting (blue or

white in colour) at the back of

your BIBO bar. (Picture 3)

f. Remove the blanking plug

from the inlet water ﬁtting,

by depressing the ring. While

depressing the ring, pull

blanking plug out. (Picture 4)

g. Insert the right angled stem

elbow (provided with your BIBO

bar) into the water inlet. (Picture 5)

h. Reﬁt the locking clip. (Picture 6)

i. Push the 6mm white water

supply pipe into the elbow at the

back of your BIBO bar. (Picture 7)

j. Open the ball valve on the

BIBO ½” “T” connector (Picture 1)

k. Turn on the angle stop valve

or your mains water supply.

Watch Video

BIBO bar - User Manual

CONTENTS

Installing your BIBO bar

STEP BY STEP GUIDE FOR SELF-INSTALLATION

3. SETTING UP YOUR BIBO bar

a. Plug the BIBO bar’s plug into

a 3 pin socket.

b. Ensure that the hot tank

switch (see page 4, number 8)

is off at the back of your BIBO

bar.

c. Turn on the power switch (see

page 4, number 13) at the back

of your BIBO bar. Please take

caution to not confuse this with

the hot tank switch.

d. Once turned on, your BIBO

bar will display the BIBO logo

(Image i) followed by a zapper

test (Image ii); this means that

your BIBO bar is operating

correctly.

e. Now you should see the

home screen. There should be a

red bar on the left of the screen

and a blue bar on the right of

the screen (Image iii).

f. Once you see the home

screen, turn on the hot tank

switch at the back of the BIBO

bar (see page 4, number 8).

g. A message will appear on

your screen to ﬁll the hot water

tank (Image iv).

h. Place a mug under the water

outlets. (See page 4, number 3)

i. Push the button ONLY

ONCE to start the boiling ﬁlling

process.

DO NOT PUSH ANY BUTTON

INCLUDING THE RED CUP

BUTTON UNTIL THIS PROCESS

HAS BEEN COMPLETED.

(If by mistake you did push a

button before seeing water ﬂow

from the nozzle switch off the

heating switch immediately and

start from step f again). You

will know that the boiling ﬁlling

process has been completed

when water starts to ﬂow from

the outlet nozzle situated under

the screen. This usually takes

about 1 minute from pushing

the red cup button to water

ﬂow from the nozzle.

j. Once water starts ﬂowing

from the nozzle push any

button to end the boiling ﬁlling

setup process.

k. The hot tank will begin to

heat up and the hot water

temperature bar icon will

be active on the screen as

streaming upwards.

iii

Watch Video

BIBO bar - User Manual

CONTENTS

once 1,5 litres has been

drained.

n. Your installation is now

complete and your BIBO bar

will be ready to be used and

enjoyed (Image vi).

When ﬁrst used, the hot

tank will take approximately

5 minutes to get up to the

maximum temperature.

l. Similarly, ﬁll the cold water

tank by dispensing water from

the cold water outlet (Image v).

To do this, touch and wait

until water starts dispensing.

Then touch any button to stop

the water ﬂow.

m. It is recommended that you

drain 1,5 litres from the cold

tank and 1,5 litres from the

hot tank before drinking from

your BIBO bar. This is done by

simply dispensing water as

per the instructions on page 20

for chilled and boiling hot

water. Note: The BIBO bar will

automatically stop dispensing

Installing your BIBO bar

STEP BY STEP GUIDE FOR SELF-INSTALLATION

3. SETTING UP YOUR BIBO bar CONTINUED

Andere Handbücher für BIBO bar

Inhaltsverzeichnis

Andere Bibo Küchengerät Handbücher

Bibo

Bibo BIBO bar Bedienungsanleitung

Beliebte Küchengerät Handbücher anderer Marken

Tayama

Tayama TYG-35AF Bedienungsanleitung

AEG

AEG 43172V-MN Bedienungsanleitung

REBER

REBER Professional 40 Benutzerhandbuch

North American

North American BB12482G / TR-F-04-B-NCT-1 Bedienungsanleitung

Presto

Presto fountain popper Bedienungsanleitung

Westmark

Westmark 1035 2260 Bedienungsanleitung

Zanussi

Zanussi ZCG64396XA Bedienungsanleitung

HOFFEN

HOFFEN SM-9302M Bedienungsanleitung

Philips

Philips HD3133 Bedienungsanleitung

Ronco

Ronco Beef Jerky Bedienungsanleitung

Hendi

Hendi 470411 Bedienungsanleitung

Livoo

Livoo MEN386 Bedienungsanleitung

Vogue

Vogue D446 Bedienungsanleitung

croydon

croydon WR-10313-700 Bedienungsanleitung

ADE

ADE AUTOMATIC-L Bedienungsanleitung

Chefman

Chefman RJ43-SQ Series Bedienungsanleitung

Vacmaster

Vacmaster VP680 Bedienungsanleitung

Jetmaster

Jetmaster 900HG Bedienungsanleitung