Congratulations on your purchase of the Professional Remote Food
Thermometer, a programmable radio frequency food thermometer. You will
now be able to remotely monitor the temperature of cooking food and the
temperature inside your EGG from anywhere in your home.
Components
1 x Receiver
1 x Transmitter
4 x Detachable, color coded stainless steel probes with steel mesh cable
4 x AAA batteries
2 x Clips
Transmitter Features
• LCD (Liquid Crystal Display) Screen - Displays all icons and temperature
• Low Battery Indicator (Will show on Probe #2)
• Remote Range: 1000 ft (305 m)
• IPX4 Water Resistant (Protects from splashing water, but do not
submerge in water)
• Touch Backlight
• Temperature Alarm
• Four Color Coded Stainless Probes
• Temperature Range of Probe: 14°F to 572°F(-10°C to 300°C)
• Temperature Accuracy: +/-1.8°F(+/-1.0°C)
• All probes can choose between BBQ and MEAT
• Battery Compartment: Holds 2 x AAA batteries, 3.0V
• Tabletop Stand, Magnet and Wall-Mounted Design
Transmitter Buttons
1. BBQ/MEAT - Press once to display HI, LO or MEAT.
2. ALARM / °F/°C - Press once to turn on/off the alarm. Press and hold for 3
seconds to switch between °F and °C.
3. - Press to decrease the temperature setting. Press and hold for 3
seconds to rapidly scroll through digits.
4. PROBE - Press to rotate through the four temperature probes. When a
probe is selected, the current temperature on the display will be ashing. To
disable/enable the alarm function, press and hold for 3 seconds.
5. SET - Press and hold for 3 seconds to set the temperature (BBQ HI, LO
temperature or MEAT temperature). Press once again to conrm.
6. - Press to increase the temperature setting. Press and hold for 3
seconds to rapidly scroll through digits.
7. Power/RESYNC - Press to turn on/off the transmitter. Press and hold for 3
seconds to enter the Synchronization/Pairing process.
8. Big Green Egg - Touch to turn on/off the backlight. Backlight will
automatically turn off after 15 seconds of inactivity.
Receiver Features
• LCD (Liquid Crystal Display) Screen - Displays all icons, temperature
• Low Battery Indicator (Will show on probe #2)
• Remote Range: 1000 ft (305 m)
• IPX4 Waterproof (Protects from splashing water, but do not submerge in water)
• Touch Backlight
• Tabletop Stand, Magnet Design
• Temperature Alarm Mode: Beep Alarm, Vibration Alarm, Beep and
Vibration Alarm and Silent Mode
Receiver Buttons
1. Power/RESYNC - Press to turn on/off the receiver. Press and hold for 3
seconds to enter the Synchronization/Pairing process.
2. MODE - Default is Beep Alarm Mode. Press once to switch to Vibration
Mode; press again to switch to Beep and Vibration Mode; press once
more to switch to Silent Mode.
3. Big Green Egg - Touch to turn on/off the backlight. Backlight will
automatically turn off after 15 seconds of inactivity.
Installing Batteries
Open the battery compartment of both the transmitter and receiver and
insert two AAA batteries with correct polarity.
Turn On/Off Unit
Press the Power/RESYNC button on the receiver to turn on/off the receiver.
Press the Power/RESYNC button on the transmitter to turn on/off the transmitter.
Operating Instructions
1. Plug the temperature probes into the corresponding probe sockets on
the transmitter.
2. The LCD screen will display all icons for 2 seconds and you will hear a
"beep"; then you will see the current default temperature on the LCD screen.
Probes 1 and 2 will display MEAT 160°F. Probes 3 and 4 will display
HI 250°F and LO 220°F.
3. If you do not insert the probes into the transmitter, the LCD screen will
display "---".
4. When all 4 probes are inserted into the transmitter, it will display the current
temperature of each probe.
5. Touch the Big Green Egg (backlight button) on the top of the transmitter to
turn on/off the backlight.
6. Press the ALARM button on the transmitter to turn on/off all probes' alarm.
Press the PROBE button to select the probe, then press and hold PROBE
button for 3 seconds to turn on/off the corresponding probe's alarm.
How to Set Meat Temperature to Your Specific Taste
1. Press the PROBE button to choose between probe 1/2/3/4. You will see the
corresponding probe’s current temperature ashing on the LCD screen.
2. Press the BBQ/MEAT button until you see MEAT on the LCD screen.
Press and hold the SET button for 3 seconds. You will see the default meat
temperature (160°F) begin to ash.
3. Press the or buttons to raise or lower the set temperature. Press and
hold the or buttons to rapidly scroll through digits.
4. Press SET again to conrm. The ashing will stop.
How to Set BBQ Temperature
1. Press the PROBE button to choose between probe 1/2/3/4. You will see the
corresponding probe’s current temperature ashing on the LCD screen.
2. Press BBQ/MEAT button until you see BBQ on the LCD screen. Press and
hold the SET button for 3 seconds. You will see default HI temperature
(250°F) begin to ash.
3. Press the or buttons to set your desired HI BBQ temperature. Press
and hold the or buttons to rapidly scroll through digits.
4. Press SET again to conrm.
5. The default LO temperature (220°F) will begin to ash. Press the or
buttons to set your desired LO BBQ temperature. Press and hold the
or buttons to rapidly scroll through digits.
6. Press SET again to conrm. The ashing will stop.
NOTE: The HI BBQ temperature range is 33°F - 572°F and the default
setting is 250°F. The LO BBQ temperature range is 32°F - 571°F and the
default setting is 220°F.
7. To set probe 2, 3, 4's temperature, select the probe and repeat the rest of
the steps above.
8. The thermometer will save the current settings after the unit is turned off.
9. After you are nished setting the temperature, you can begin to monitor the
MEAT and BBQ temperatures. Insert each probe into the meat or place in
the BBQ/SMOKER/OVEN with the BBQ Clips. The receiver will receive an
updated temperature every 12 seconds.
10. Once the temperature of the MEAT/BBQ reaches the set temperature, both
the transmitter and receiver will sound an alarm, the LCD backlight will turn
on, and the corresponding probe on the display will ash. Press any button
to stop the alarm.
Details about HI and LO Alarm
1. The alarm will not be activated if the current temperature is below the LO
setting or above the HI setting. For example, current temperature is 86°F,
the HI setting is 194°F, the LO setting is 140°F, the alarm will not be activated.
Once the current temperature goes above 140°F, and then drops below
140°F, the LO temperature alarm will be activated. Once the current
temperature goes above 194°F, the HI temperature alarm will be activated.
2. The alarm settings will be saved after the unit is turned off.
Auto Off Feature
The receiver will turn off automatically if it hasn't received a temperature signal
from the transmitter for more than 30 minutes. An alarm will sound for one
minute before it automatically turns off. The transmitter will automatically turn
off if the temperature of the 4 probes stays below 104°F for 2 hours. The unit
will save the current settings after the unit is turned off.
Synchronize/Pair Transmitter and Receiver
The transmitter and receiver were already paired at our manufacturing facility.
Usually you do NOT need to re-synchronize or re-pair the units. Simply plug in
the probes, insert batteries, and turn on the receiver and transmitter. After a
few seconds, the temperatures will show on both the receiver and transmitter,
and the units are ready for use. However, if the transmitter and receiver are no
longer paired, you may re-synchronize them as follows:
Option 1:
1. Insert two AAA batteries into the receiver; the signal icon on the display will ash.
2. Insert two AAA batteries into the transmitter and insert the stainless-steel
probes into the corresponding probe sockets in the transmitter. The LCD
screen will show the current temperatures of each probe.
3. Wait for a few seconds. The transmitter will send the signal to the receiver
and once you see the current temperatures on the receiver, the thermometer
is ready for use.
Option 2:
1. Press and hold the POWER/RESYNC button on receiver for three seconds
to enter the synchronization mode. Then press and hold the POWER/RESYNC
button on transmitter for three seconds.
2. Wait for a moment until the temperature reading shows on the receiver
display; it means the synchronization/pairing is complete. Your thermometer
is now ready for use.
Note: The synchronization between the transmitter and the receiver won't be
lost even if you replace the batteries.
Helpful Hints
• If the receiver and/or the transmitter do not show the temperature, wait for
the probe to reach room temperature. Be sure the probe jacks are fully
inserted into the transmitter and gently twist them back and forth to ensure
good contact. If the problem persists, it is likely the internal probe wire has
shorted out either through moisture or heat damage.
Includes four temperature probes to
remotely monitor the temperature of
food or the temperature inside the EGG.
• Within the warranty period, contact us and we will send you a replacement
probe at no charge.
• If the temperature displayed seems to read too high or the temperature
seems to increase too quickly, check to make sure the probe tip is not
poking through the food. Re-position the probe tip in the center of the
thickest part of the food. Avoid touching bone or heavy fat areas.
Precautions
1. Always wear a heat resistant glove to touch the stainless-steel probe
sensors or wires during or just after cooking. Do not touch with bare hands.
2. Keep the stainless steel probe sensors and wires away from children.
3. Clean the stainless steel probes and dry thoroughly after each use.
4. Do not expose the plugs of the stainless-steel probes or the probe sockets
of the transmitter to water or any liquid. This will result in a bad connection
and faulty readings.
5. Wipe the transmitter and receiver with damp cloth.
6. Do not expose the receiver or transmitter to direct heat.
7. Do not use stainless steel probes in a microwave oven.
8. The probe thermometer registers temperatures as low as 14°F (-10°C) and
as high as 572°F (300°C). Do not use the stainless probe sensor above
572°F. Doing so will deteriorate the wire.
9. Not intended for use by persons aged 12 and under.
Cleaning
• Always wear a heat resistant glove to touch the stainless steel probe sensor
or wire during or just after cooking. Do not touch with bare hands.
• Keep the stainless steel probe sensor and wire away from children.
• Wash the metal probe tip with hot soapy water and dry thoroughly. Do not
immerse the probe in water while cleaning.
• Wipe the transmitter and receiver with damp cloth. Do not immerse either in water.
FCC Compliance – Information to user
Warning: Changes or modications to this unit not expressly approved by the
party responsible for compliance could void the users' authority to operate the
equipment.
Note: This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instruc-
tions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television recep-
tion, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject
to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference
that may cause undesired operation.
Declaration of Conformity
Hereby, the manufacturer declares that this product complies with the basic
requirements and applicable regulations of the Radio Equipment Directive
2014/53/EU, the EMC Directive 2014/30/EU.
Disposal
• Protect our environment: do not dispose of electrical equipment in the
domestic waste.
• Return any electrical equipment that you will no longer use to the collection
points provided for their disposal.
• This helps avoid the potential effects of incorrect disposal on the
environment and human health.
• This will contribute to the recycling and other forms of reutilization
of electrical and electronic equipment.
• Information concerning where the equipment can be disposed of can be
obtained from your local authority.
CAUTION: Batteries/rechargeable batteries must not be disposed of with
household waste!
• The batteries must be removed from the appliance.
• Take spent batteries to the appropriate collection point or to a dealer.
•
Your town or local authority can provide information about public collection points.
This symbol can be found on batteries/rechargeable batteries, which
contain hazardous:
Pb = contains lead
Cd = contains cadmium
Hg = contains mercury
Li = contains lithium
Limited One-Year Warranty
ThermoPro warrants this product to be free of defects in parts, materials and
workmanship for a period of one year, from date of purchase. Should any
repairs or servicing under this warranty be required, contact Customer Service
by phone or email for instructions on how to pack and ship the product to
ThermoPro. This warranty gives you specic legal rights and you may also
have other rights which vary from state to state.
Wireless Remote Food
Thermometer with Four
Temperature Probes
128003
