This clock operates on an AC adaptor or 3 AA batteries.
AC ADAPTOR POWER CORD:
Plug the AC adaptor into the adaptor plug (see image to the right). Plug the
adaptor into your household electrical outlet. Only use the adaptor provided.
Using any other adaptor will void the warranty. The clock will draw power from the
adaptor prior to drawing power from the batteries. If the power goes out and
batteries are in the clock the clock will stay on
.
WARNING: THE AC ADAPTOR IS NOT SUITABLE FOR CHILDREN
UNDER 36 MONTHS. LONG CORD. STRANGULATION HAZARD. IF YOUR
CHILD IS UNDER 36 MONTHS USE BATTERIES TO POWER THE CLOCK.
NEVER LEAVE CORDS OF ANY KIND NEAR AN INFANT.
BATTERIES:
1. Remove battery compartment cover with a Phillips #2 screwdriver
(not included).
2. Remove old batteries (if replacing batteries).
3. Insert 3 NEW AA alkaline batteries (not included).
4. Be sure to follow the battery polarity guide (see image to the right).
5. Replace battery compartment cover with a Phillips #2 screwdriver.
Do not over tighten screw.
BATTERY PRECAUTIONS:
1. Use only the size and type of batteries specified.
2. Always purchase the correct size and grade of battery most suitable for the
intended use.
3. Be sure to follow the correct polarity when installing the batteries as indicated in
the battery compartment. Reversed batteries may cause damage to the device.
4. Do not mix alkaline, standard (Carbon-Zinc), or rechargeable (Nickel Cadmium)
batteries.
5. Replace all batteries of a set at the same time. Do not mix old and new batteries.
6. Clean the battery contacts and also those of the device prior to battery installation.
7. Do not dispose of batteries in fire.
8. Remove batteries if consumed or if product is to be left unused for an extended
period of time.
FCC STATEMENT: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that
may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equip-
ment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
WARNING: Modifications to this product not approved by the party responsible for compliance could void the user’s authority to operate
the product.
ONE-YEAR LIMITED WARRANTY:
This product is warranted to the original purchaser that the product will be free from defects in materials and workmanship for a period of
one year from the date of purchase. Additional details are available at www.bigredroosterproducts.com.
©2018 London Johnson, Inc. All Rights Reserved.
www.bigredroosterproducts.com
Made In China
Adaptor Plug
