Power on: Long press the power button for 3s, the power indicator will light up
and the voice prompts "Power on". The headset is on.
Power off: Long press the power button for 3s, the power indicator will turn
down and voice prompt "Power off". The headset is off.
Automatically hibernate: The headset will be shut down automatically if no
connection/ operation/audio-input for 30 minutes after power on.
02.Power
This headphone supports four connections: 3.5mm Wired Connection, Type-C
Wired Connection, 2.4G Wireless Connection, and Bluetooth Wireless
Connection.
3.5mm WIred Connection: Support Win10/11 / Switch / Android / PS
Controller / XBOX Controller
Plug the 3.5mm Audio Cable into the Headphones and the audio device.
Note: You do not need to turn on the headphone if using the wired connection.
And all the buttons will be banned when wired connection except the Volume
Wheel.
Type-C wired connection: Support Win10/11.
Plug the Type-C cable into the headphone and the audio device
2.4G connection: Support Win10/11 / Switch / PS / Android
1. Hold the power button for 3s and toggle the Mode Switcher up to 2.4G
mode. The Switcher color will be green. The power indicator will be flashing in
green means the headphone is connected.
2. Plug the dongle into the audio device and wait for the power indicator to
stop flashing, the connection is successful.
Note: The 2.4G dongle is already paired in the factory. If your device only has
Usb-A port please use the CtoA cable. We commend you for using the CtoA
cable on the console.
Dongle Pairing: Hold the power button for 6s when 2.4G mode and the
indicator will flash in blue and red the headphone is in pairing mode. Plug the
dongle into the PC USB port it will automatically be paired.
03.Connection
Headphone*1/ Microphone*1/ User Manual*1/ Quality Certificate*1
3.5mm Audio Cable*1/ CtoA Cable*1/ Usb-C Dongle*1
Win10/11 / Switch / PS / XBOX / Android/iOS
Packing List
Supported
Platform
