Bilancial D410 Bedienungsanleitung
SOCIETÀ COOPERATIVA
BILANCIAI
D410 Terminal
Use and maintenance manual
Code 813711 EDITION 30 May 2001
Index
1. GENERAL 1-5
1.1 Declaration of conformity 1-5
1.2 Foreword 1-6
1.3 Symbols 1-8
1.4 Documentation 1-9
1.5 Description of the terminal 1-9
1.6 Technical characteristics of the terminal 1-10
1.7 Dimensions and weight of the terminal 1-11
1.8 Obtaining technical assistance 1-13
1.9 Replacement parts list 1-14
1.10 Warranty 1-14
2. SAFETY INSTRUCTIONS 1-15
2.1 Prohibited uses 1-15
2.2 Regulations 1-15
2.3 Prescriptions of use 1-15
3. DELIVERY AND INSTALLATION 1-17
3.1 Connection of the terminal to the electrical supply line 1-18
3.2 Connection of the terminal to the platform scale 1-19
3.2.1 Equipotentiality between the terminal and the platform scale 1-20
3.2.2 Connection of analogue load cells 1-20
3.2.3 Connection of digital load cells 1-21
3.3 COM1 serial port connection 1-22
3.4 COM2 serial port connection 1-23
3.4.1 Connection of COM2 in RS232 configuration 1-23
3.4.2 Connection of COM2 in RS422 configuration 1-24
3.4.3 Connection of COM2 in RS485 configuration 1-25
3.5 Analogue output connection 1-26
3.6 Input/Output connection 1-27
4. CONTROLS, DISPLAY, SWITCHING THE TERMINAL ON AND OFF 1-29
4.1 Display of weight and additional information 1-29
4.1.1 Selection display symbols 1-30
4.2 Weighing function keys 1-31
4.3 Alphanumeric keys 1-33
4.4 Switching the terminal on and off 1-34
5. USE OF THE TERMINAL 1-37
5.1 General 1-37
5.1.1 Using the keys to navigate the menus 1-37
5.1.2 Entering numeric data (Editor) 1-38
5.1.3 Entering alphanumeric data 1-38
5.1.4 Shortcut keys 1-40
5.2 User menu 1-40
5.2.1 User menu tree 1-40
5.2.2 Adjusting the contrast 1-42
5.2.3 Changing the date and time 1-42
5.2.4 Weight display 1-42
5.2.5 Memory status 1-45
5.2.6 Reprint 1-45
D410
1-3
5.2.7 Diagnostics (for digital scale only) 1-45
5.2.8 Setting the outputs as Setpoints (if enabled) 1-46
5.2.9 Setting the outputs as ranges (if enabled) 1-46
5.2.10 Generic code 1-46
5.2.11 Product code 1-47
5.2.12 Product code list 1-47
5.2.13 Preset tares 1-48
5.2.14 Preset tare list 1-48
5.2.15 Progressive number 1-49
5.2.16 Coefficient Management 1-49
5.2.17 Totals management 1-50
5.3 Printing weighing data 1-52
5.3.1 Weighing data reprint 1-53
5.4 Operating modes 1-54
5.4.1 Standard operation 1-54
5.4.2 Sum weighing operation 1-54
5.4.3 Loading extraction operation 1-54
5.4.4 Unloading extraction operation 1-55
5.5 MPP operation 1-55
6. OPTIONS 1-57
6.1 4 I/O board 1-60
6.2 BCD parallel 5V 1-61
6.3 Calculator BCD 1-63
6.4 Parallel 24V source current BCD (positive common) 1-65
6.5 Serial port expansion board 1-68
6.6 MPP memory expansion boards 1-71
6.6.1 Memory capacity 1-71
6.6.2 Operation 1-71
6.6.3 Disabling MPP 1-72
6.6.4 Checking memorised weight data 1-73
6.7 12-24Vac-dc input power supplier 1-74
6.8 Printers 1-76
7. MAINTENANCE 1-77
7.1 Battery 1-77
7.2 Changing the fuses 1-77
8. TROUBLESHOOTING 1-79
8.1 Malfunctions 1-79
8.2 Error messages 1-80
D410
1-4
1. GENERAL
1.1 Declaration of conformity
DECLARATION OF CONFORMITY
Manufacturer: SOCIETÀ COOPERATIVA
BILANCIAI
Address: Via S. Ferrari, 16
41011 Campogalliano (MO)- Italy
declares that the product
electronic terminal model: D410
with the options all those described in this manual
conforms to:
✔standards EN45501, EN50081-1 in accordance with the
requirements of Directive 89/336 EEC (electromagnetic compatibility)
✔standard EN60950 in accordance with the requirements of Directive
73/23 EEC (low voltage directive)
The terminal is also suitable for the creation of approved
non-automatic weighing instruments with "CE Type Approval
Certificate" in conformance with the requirements of Directive 90/384
EEC.
The product bears the CE marking.
Campogalliano, 24 July 2000
Technical Director
Eng. Luciano Diacci
Declaration drafted in conformance with EN45014.
D410
1-5
1.2 Foreword
✔The aim of this manual is to provide the operator, through the use of
text and illustrations, with essential information regarding the
installation, safe operation and maintenance of the weighing system.
✔This manual must be kept in a safe place where it is readily available
for consultation. Always observe the instructions contained in the
manual!
✔The safe operation of the system is the responsibility of the operator,
who must have a thorough knowledge of the system.
✔The user is responsible for ensuring that the installation conforms to
the applicable regulations.
✔The equipment must be installed by specialised personnel who have
read and understood this manual.
✔"Specialised personnel" means any personnel who, by virtue of the
training they have received and their professional experience, have
been explicitly authorised by the "System safety supervisor" to install,
operate and maintain the system.
✔In the event of any problems, contact your nearest Service Centre.
✔Any attempt on the part of unauthorised personnel to dismantle or
modify the terminal is prohibited; any such attempt shall invalidate the
warranty and release the manufacturer from all liability for any injury
or damage.
✔The alteration or removal of the data plates and seals is strictly
prohibited; check that all plates and seals are present and legible, if
not contact After-Sales Service.
✔The manufacturer shall not be liable for any damages caused by
incorrect handling of the terminal.
✔The information and illustrations contained in this manual were up to
date at the time of publication.
✔The Manufacturer is committed to a policy of continuous product
improvement and system components may therefore be subject to
modification.
✔All the technical information contained in this manual remains the
exclusive property of the manufacturer and may not be divulged to
third parties.
✔No part of this document maybe reproduced or transmitted in any
D410
1-6
form, including publication in computerised form or on the World Wide
Web, without the express written permission of the manufacturer.
✔This manual may not be used for purposes other than those directly
related to the installation, operation and maintenance of the terminal.
✔In order to more clearly illustrate certain maintenance or adjustment
operations, some of the illustrations in this manual show the weighing
system with the safety guards removed. Under no circumstances may
the system be operated in these conditions. Do not operate the
system in these conditions under any circumstances whatsoever, but
remove the safety guards for the time strictly required to carry out the
required repairs or maintenance then fit them back in place.
D410
1-7
1.3 Symbols
Below is a list of the symbols used in this manual to alert the reader to
the various hazards associated with the operation and maintenance of
the instrument.
DANGER
Denotes an operation or procedure where failure to observe
the instructions will result in death or serious injury.
CAUTION
Denotes an operation or procedure where failure to observe
the instructions could result in minor injury or damage to the
instrument.
WARNING
Information or instructions on how the system is to be
operated correctly in order to maximise its service life or
prevent loss or damage of programmed data or to optimise
operation with regard to metrological standards.
Text and messages displayed on the terminal are printed in this manual
using special characters.
Messages:
Display messages appear like this.
Menu pathways:
2°F>OTHER>MENU>Contrast.
The character > indicates the transition from one menu option to the
next.
D410
1-8
1.4 Documentation
This manual is accompanied by a CD-ROM that primarily contains
information about the installation of the terminal.
Here you will find information on how to interface the terminal with a PC
and PLC.
1.5 Description of the terminal
The model D410 digital weight indicator allows highly accurate and
reliable weighing. This terminal is designed to facilitate dialogue with the
operator through the alphanumeric keypad and graphic display, which, in
addition to being extremely easy to use, has facilities for changing the
shape and size of the display characters to suit various conditions of
use. The D410 terminal provides a wide range functions, which,
combined with the possibilities for expansion, allow for easy interfacing
with external equipment.
Some of the main features of the terminal:
✔facility for connection to a scale with analogue load cells (up to 12 x
350 ohm load cells)
✔facility for connection to a scale with digital load cells (up to 12 CPD
load cells)
✔two RS232/422/485 serial ports
✔analogue output of 0-10V or 0(4)-20 mA
✔2 inputs and 2 relay outputs
✔110/230 Vac power
✔specific operating modes that can be selected by the operator
✔facility for connection to a tally roll printer, document printer or
labelling machine
✔management of totals files associated with alphanumeric codes
✔quick customisation of keypad and messages
D410
1-9
1.6 Technical characteristics of the terminal
Power supply 85-265 Vac 50/60 Hz
12-24 Vdc (optional)
Maximum power: 50 W
Load cell connection: up to 12 analogue load cells of
350 ohm via 9-pin D-type
connector
up to 12 CPD digital load cells via
15-pin D-type connector
Minimum impedance: 29 ohm
10 VdcAnalogue load cell power: 10 - 18 VdcDigital load cell power:
Internal resolution: 500000 points @ 25 conv/sec
120000 points @ 100 conv/sec
10000 divisions maximumResolution in type-approved
version: 23 mVMaximum input signal:
Sensitivity: 0.75 uV/division (version with
analogue load cells)
Full scale stability: < 5 ppm/°C
Zero stability: < 5 ppm/°C
-10 + 40 °CCompensated temperature range: -10 + 50 °COperating temperature range:
Protection class: IP20
85 % @ 40°C
Humidity:
D410
1-10
Inhaltsverzeichnis
Andere Bilancial Touch-Terminal Handbücher
Beliebte Touch-Terminal Handbücher anderer Marken
Wincor Nixdorf
Wincor Nixdorf iPOS plus Advanced Bedienungsanleitung
Ingenico
Ingenico AXIUM EX4000 Bedienungsanleitung
Heisei Electronics
Heisei Electronics Q-POS 815 Bedienungsanleitung
Amano
Amano MTX-15 Bedienungsanleitung
FLOWBIRD
FLOWBIRD CWT Compact Touch Bedienungsanleitung
Demco
Demco SP7 Bedienungsanleitung
Motorola
Motorola MTP850 Bedienungsanleitung
YASKAWA
YASKAWA 62H-MDC0 Bedienungsanleitung
MVG industries
MVG industries NeptuLink Bedienungsanleitung
Price Industries Limited
Price Industries Limited FDC Gebrauchsanweisung
Honeywell
Honeywell TemaKey Bedienungsanleitung
EBN
EBN BPC65-B-A16G Bedienungsanleitung