Donotmoveorliftthemachineduringoperation.
Donotleavetheapplianceexposedtotheelements(sun,rainetc..).
Never immerse the scale in water or prevent any liquid into the
balance.
Caution:becarefulnottodamagetheglasssurface.Donotusethis
product if the glass surface is damage or if the glass surface is
crackedoriftheglassiscracked.
INSTALLATION
After unpacking, check the integrity of the appliance; if in doubt, do not use it
and contact a qualified technician. The packaging materials (plastic bags,
polystyrene, metal staples, etc.) must not be left within reach of children, as they
constitute possible sources of danger and must be disposed of according to
applicable regulations.
Before each use, ensure that the appliance is in good order: if in any doubt,
consult a qualified professional.
The surface where the appliance is used must be stable, spacious (do not use on
shelves), and level (since the appliance could tip over).
Position the appliance:
-away from sources of heat (e.g. other ovens, gas stove, etc.), moisture, dust,
chemicals; check that there is at least 50 cm of free space around the unit.
-on a horizontal surface that is stable, far from the edge of the furniture to
prevent the appliance from falling.
-away from liquid containers, such as sinks etc.
Make sure that the appliance works correctly: if not, turn it off and consult a
qualified professional.
If there is a fault or the appliance is not working correctly, switch it off and have
it checked by a qualified professional. Repairs done by an unqualified person
can be dangerous and cause the guarantee to become void.
OPERATION
Before each use, check that the equipment is in good condition, that the surface
with the buttons are not damaged: if in doubt consult a qualified professional.
1. Open the battery compartment cover, and matching the polarity insert 2
CR2032 batteries, one for each seat, close the lid properly.
2. Place the balance over a plate or a bowl, press the button with a finger " "
TARE to switch and tare the balance, it will appear on the display “0/ /g”
3. Add foods to be weighed on the plate or in the bowl, just that the balance has
weighed, appears the weight and the symbol " " on the LCD.
4. Press the UNIT button to select desired unit of measure (g / kg / oz / lb).
5. To switch off the scale, press " " TARE for. about 2 seconds.
