Binatone e820 System Bedienungsanleitung
BINATONE “ e820 System ”
User Guide - Front Page
1)White background and black letters
2)Material: 100lb Double face art paper
3) Size: 105mm(w) x 148mm(H) A6
BINATONE “ e820 System ”
User Guide - Back Page
Aus Ver 1, Jan, 05
USER GUIDE
THIS EQUIPMENT IS NOT DESIGNED FOR
MAKING EMERGENCY TELEPHONE CALLS
WHEN THE POWER FAILS. ALTERNATIVE
ARRANGEMENTS SHOULD BE MADE FOR
ACCESS TO DIAL EMERGENCY SERVICES.
Before operating this set,
please read these instructions carefully.
Digital Cordless Telephone
with Caller Display
and Answering
e820 System
Machine
Important note — emergency calls
The e820 is not designed for making emergency
calls when the mains power fails. So you should
make alternative arrangements for access to
Emergency Services.
(This means that you should also have a basic
phone that does not need mains power, connected
to your line so that you can make calls during a
power failure.)
If you need help …
The Binatone service Line is available from 9.00 am to
5.00 pm, Monday to Friday, on
1300 768 112
Calls are charged at Local Call rate.
Unpacking your e820 system
In the box are:
■the cordless handset (up to six, depending on
which e820 system you’ve bought)
■the base unit/answering machine
■three rechargeable batteries and a battery
compartment cover for each handset
■atelephone line cable for the base unit
■amains power lead and adapter for the base
unit
■up to five charger pods, each with a separate
mains power lead and adapter
Keep the packaging materials in a safe place in
case you later need to transport the unit.
Keep your sales (till) receipt, which is your
warranty.
E:\Binatone2004\e820\e820_UK_03.vp
15 November 2004 11:41:41
Color profile: Generic CMYK printer profile
Composite Default screen
If the display is blank
Press the button to switch
the handset on
PROG button
Press to start programming.
Press during a call to make a note
of a number in the Notebook.
/INT (Intercom)
button
Press to make an
intercom call (if you
have more than one
handset). SCROLL ( ) buttons#
When a long number (more
than 16 digits) is shown on
the display, press these to
scroll along the digits.
Microphone
Where to find it
Loudspeaker
(Behind the
charging
cradle)
PHONE /OK button
Press to begin or answer a phone call.
Press while programming to confirm
your selection.
UP and DOWN buttons
Press during a call to adjust the volume in
the earpiece.
Press to move through the list of stored
numbers or Caller Display records.
(Last Number Redial)/ CDS/
PAUSE button
Press ONCE to make a repeat call to one
of the last five numbers you dialled.
Press TWICE to see a list of Caller
Display records.
Press to generate pauses
when using the phone
on a PBX.
SPEAKERPHONE button
Press to answer or end a
call using the base unit’s
speakerphone (hands-
free).
Battery Charge light
This comes on when the
handset’s batteries are
being charged.
VOLUME
MEMO
DEL
OGM
IN USE light
This comes on when you have a
connection to the telephone line.
It flashes when the phone is
ringing for an incoming call.
Volume –/+ buttons
To adjust the
loudspeaker volume.
Before you can use the handset to make calls you will need to fit and fully
charge the batteries, as described on pages 6 and 7.
Please read the notes on pages 3 and 4 before you install the base unit.
HANG UP / C (Cancel) button
Press to hang up at the end of a call.
Press and hold for 1 second to lock the keypad.
Press and hold for 3 seconds to turn the handset on and off.
While dialling or programming, press BRIEFLY to delete digits from
the display; or press and HOLD to clear the display.
HANDSET LOCATOR button
Press to make all registered
handsets ring, (useful if
you've forgotten where you
put a handset).
R (Recall) button eYou may need this during a call if your 820 is
connected to a PBX, or if you use BT’s Select Services.
MEMORY button
Press to store numbers in memory and to make calls to stored numbers.
For details of the answering
machine buttons and lights,
see the diagram on page 25.
E:\Binatone2004\e820\e820_UK_03.vp
15 November 2004 11:45:41
Color profile: Generic CMYK printer profile
Composite Default screen
1
When this shows ‘nearly empty’ ( ), put the handset onto
the base unit or charger pod as soon as possible, to charge the
batteries. While the batteries are being charged, this symbol
blinks.
Symbols on the display
The handset’s
number (1 if you
have a single system,
1, 2 or 3 if you have
a Twin or Triple
system)
The time is shown if you’ve
set the handset’s clock
The base unit’s number (1,
unless you have registered
your handset to more than
one base unit)
Intercom
call
Memory/
store
Indirect
network
Redialling
Caller
Display
This appears when the handset is dialling a non-local number
via an alternative network.provider’s
This appears when you’re using Last Number Redial.
This appears when you’re checking, or dialling from, the list of
Caller Display records.
This appears when the keypad is locked, or when you’re trying
to dial a barred number.
This flashes while your handset is ringing for an intercom call,
and comes on steadily when the call’s connected.
This comes on when you’re storing numbers in memory, and
when you’re making calls to stored numbers.
Keypad
locked
Signal
level This shows the strength of the signal between the handset and
base unit. It flashes while the handset is trying to establish a
radio link . .
to the base unit If this symbol flashes while you’re
on a call, move closer to the base unit
Battery
charge
level
New call This appears when you missed incoming calls (even if you do
not use Caller Display).
What the symbols mean
The duration of each call is shown on the display from 20 seconds
after you press the PHONE button for a line, until 5 seconds after
you end the call.
E:\Binatone2004\e820\e820_UK_03.vp
15 November 2004 11:48:11
Color profile: Generic CMYK printer profile
Composite Default screen
Contents
Read these notes first 4
Choosing a site for the base unit and
charger pod 4
Radio signals between handset and
base unit 4
Mains power connection 4
Battery safety 5
Connection and conditions for use 5
Installation and set-up 6
Before you start 8
Electrical safety 8
Interference 8
‘Out of range’ warning 8
Switching on and off 9
To switch the handset on and off 9
To lock the keypad 9
Making and answering calls 10
To make a call 10
To answer a call 10
To end a call 10
Earpiece volume 10
Last Number Redial (LNR) 11
Using the base unit’s
speakerphone 12
To answer a call 12
To end a speakerphone call 12
To adjust the volume 12
Memory dialling 13
To store a number 13
To make a memory call 13
Chain dialling 13
To change a stored number 14
To delete a stored number 14
To use the notebook 15
To store an LNR number in memory
15
Caller Display 16
To check Caller Display records 16
To return a call 17
To delete Caller Display records 17
To store a Caller Display number in
memory 17
Using a multi-handset system 18
To make an intercom call 18
To answer an intercom call 19
To end an intercom call 19
To transfer a call 19
To shuttle between two calls 20
To set up a three-way conference
20
New Call tone 21
To page all handsets from the
base unit 21
Handset registration 22
To register a new handset or to re-
register an existing handset 22
To register your handset to a new
base unit 22
To de-register a handset 23
To select a base unit 23
To register to a different brand of
base unit 24
2
E:\Binatone2004\e820\e820_UK_03.vp
15 November 2004 11:48:11
Color profile: Generic CMYK printer profile
Composite Default screen
Call waiting function 12
Answering machine buttons
and lights 25
Setting up the answering
machine 26
To set the clock 26
To check the clock 26
Outgoing messages (OGMs) 27
To record OGM1 27
To record OGM2 28
To set the number of rings 28
Using the answering machine 29
To switch on and off 29
To switch between OGMs 29
To record a memo 29
To play back your messages 30
To intercept a call 31
To delete messages 32
To go back to the default OGMs 32
Remote operation 33
To set a remote security code 33
To check your messages remotely
33
Keys to press during remote
operation 34
Switching on remotely 34
Customising your handset 35
General points 35
Auto-answer 35
Ringer volume and melody 36
Key tone 36
Direct Call 37
To clear all memories 38
To reset the handset 38
Customising your base unit 39
General points 39
Emergency numbers 39
Ringer volume and melody 40
Call barring 40
Date and time 42
To clear all Caller Display memories
43
To reset the base unit 43
Indirect Network 44
To set the network access code 44
To set additional ‘local’ dialling codes
45
To turn Indirect Network on and off
45
Troubleshooting 46
Warranty 53
Technical details 54
Index 55
Contents
3
E:\Binatone2004\e820\e820_UK_03.vp
15 November 2004 11:48:11
Color profile: Generic CMYK printer profile
Composite Default screen
Read these notes first
Choosing a site
for the base
unit and
charger pod
The base unit and charger pod(s) should be placed on a
level surface, in a position where:
■the mains adapter plug will reach an easily accessible
230-V AC switched mains supply socket — never try
to lengthen the mains power cable
■the base unit’s telephone line cable will reach your
telephone line socket or extension socket (the charger
pod does not have a telephone line connection)
■it is not close to another telephone — this can cause
radio interference
■it is not close to a sink, bath or shower, or anywhere
else where it might get wet
■it is not close to other electrical equipment — fridges,
washing machines, microwave ovens, fluorescent
lights, TVs etc.
Radio signals
between
handset and
base unit
To use your handset and base unit together, you must
be able to establish a radio link between them. Be
aware that:
■Any large metal object — like a refrigerator, a mirror
or a filing cabinet — between the handset and the
base unit may block the radio signal.
■Other solid structures, like walls, may reduce the
signal strength.
Mains power
connection IMPORTANT — The e820 base unit and charger pod
must be used with the mains adapter supplied with the
unit. Using any other adapter will result in non-
compliance with EN60950, and will invalidate any
approval given to this apparatus.
4
E:\Binatone2004\e820\e820_UK_03.vp
15 November 2004 11:48:11
Color profile: Generic CMYK printer profile
Composite Default screen
Battery safety Only use the rechargeable batteries supplied with the
handset. DON’T use non-rechargeable batteries —
they may burst, causing damage.
Connection
and conditions
for use
You can connect your e820 to a direct exchange line
(DEL) — a line connected to a local exchange, with its
own phone number; to an extension socket connected
to a DEL; or to an extension on an approved compatible
PBX. Do not connect the e820 as an extension
to a payphone.
The ringer equivalence numbers (RENs) of all
instruments (phones, fax machines, etc.) connected to
an exchange line must not add up to more than 4 —
otherwise, one or more of them may not ring and/or
answer calls correctly. The e820 has a REN of 1, and
most other telephones have a REN of 1 unless marked
otherwise.
Read these notes first
5
E:\Binatone2004\e820\e820_UK_03.vp
15 November 2004 11:48:11
Color profile: Generic CMYK printer profile
Composite Default screen
Installation and set-up
6
DC 9V
1
3
5
4
Choose a suitable site for the
base unit See page 4
Plug the mains adapter into a
230 V AC, 50 Hz mains socket,
with the switch on the socket
set to OFF
Plug the mains adapter into a 230 V AC,
50 Hz mains socket, with the switch on
the socket set to OFF
Switch on at the mains socket(s)
If you have one or more charger pods …
Connect the mains power lead
and the telephone line cord into
the back of the base unit
2
Use the telephone
line cord supplied
with your 820 —
do not use any other
telephone line cord
e
See the note
on page 4
See the note
on page 4
E:\Binatone2004\e820\e820_UK_03.vp
15 November 2004 11:48:13
Color profile: Generic CMYK printer profile
Composite Default screen
7
Fit the rechargeable batteries in each handset
6
7
A
+–
. Fit the three
batteries as
shown, making
sure you match
the and ends
to the markings
in the battery
compartment
B. Fit the
battery
compartment
cover, sliding it
into place and
pressing firmly
to make sure it
is secure
Charge the batteries for 15 hours
The battery charge level symbol should increase
by one bar every half hour when you’re charging
an empty battery. If you think that the symbol
isn’t showing the correct battery charge level,
remove and refit the batteries.
Before you use the handset for
the first time, it’s important to
charge the batteries fully.
The handset ‘beeps’ when it’s
correctly in position on the
charging cradle.
Leave the handset on the charging cradle
for 15 hours.
The battery
level symbol
blinks
Make sure the mains socket is
switched on if you want to use
the phone — it will not work
without electrical power
Connect the base unit to the telephone line
Switch off power at the mains socket
Insert the telephone line plug into
the socket as shown
Switch mains power back on
8
Use the plug to
raise the shutter
before pushing
it into the socket
NOTE: the charger pod does not have
a connection to the tele
p
hone line.
DON’T use non-rechargeable batteries in the handset.
The Charge
light comes on.
E:\Binatone2004\e820\e820_UK_03.vp
15 November 2004 11:48:16
Color profile: Generic CMYK printer profile
Composite Default screen
Andere Handbücher für e820 System
1
Inhaltsverzeichnis
Andere Binatone Schnurloses Telefon Handbücher
Binatone
Binatone iDECT C3i system Bedienungsanleitung
Binatone
Binatone VEVA 1520 Triple Bedienungsanleitung
Binatone
Binatone SYMPHONY 3325 Bedienungsanleitung
Binatone
Binatone SYMPHONY 2600 Bedienungsanleitung
Binatone
Binatone Lifestyle 1900 Bedienungsanleitung
Binatone
Binatone FUSION 2200 Bedienungsanleitung
Binatone
Binatone Elite 2025 Bedienungsanleitung
Binatone
Binatone The brick Bedienungsanleitung
Binatone
Binatone SYMPHONY 2610 System Bedienungsanleitung
Binatone
Binatone BB3200 Bedienungsanleitung
Binatone
Binatone e900 System Bedienungsanleitung
Binatone
Binatone Fusion 2510 Bedienungsanleitung
Binatone
Binatone 1505 Bedienungsanleitung
Binatone
Binatone DP270 Bedienungsanleitung
Binatone
Binatone Brick 4home edition Bedienungsanleitung
Binatone
Binatone ICARUS 2010 system Bedienungsanleitung
Binatone
Binatone SPEAKEASY COMBO 2005 TRIPLE Bedienungsanleitung
Binatone
Binatone iDECT X1i Bedienungsanleitung
Binatone
Binatone 921A Bedienungsanleitung
Binatone
Binatone IDECT V2 Bedienungsanleitung
