Binatone SYMPHONY 2600 Bedienungsanleitung
"Symphony Symphony 2600 System"
User Guide - Front Page
1) Colour : White background black letters.
2) Material : 80lb book paper.
3) Size: 105mm(w) x 145mm(H) or A6
"Symphony 2600 System"
User Guide - Back Page
Ver. 1, Ju 07 Before operating this set,
please read these instructions carefully.
TELEPHONES WITH
USER GUIDE
SMS MESSAGING
l
THIS EQUIPMENT IS NOT DESIGNED FOR
MAKING EMERGENCY TELEPHONE CALLS
WHEN THE POWER FAILS. ALTERNATIVE
ARRANGEMENTS SHOULD BE MADE FOR
ACCESS TO DIAL EMERGENCY SERVICES.
DIGITAL CORDLESS
Symphony 2600 System
Important note — emergency calls
The Symphony
emergency calls when the mains power fails. So you
should make alternative arrangements for access to
Emergency Services.
(This means that you should also have a basic
phone that does not need mains power, connected
to your line so that you can make calls during a
power failure.)
If you need help …
The Binatone Help Line is available from 9.00 am to
5.00 pm, Monday to Friday, on
Calls are charged at Local Call rate.
Unpacking your Symphony 2600 system
In the box are:
■the cordless handset (up to six, depending on
which Symphony system you’ve bought)
■the base unit
■two rechargeable batteries and a battery
compartment cover for each handset
■atelephone line cable for the base unit
■amains power lead and adapter for the base
unit
■up to five , each with a separate
mains power lead and adapter, for multi-
handset systems
Keep the packaging materials in a safe place in
case you later need to transport the unit.
Keep your sales (till) receipt, which is your
guarantee.
Or visit our website, at:
http://www.binatoneonline.com/
charger pods
0845 345 9677
2600 is not designed for making
2600
INT (Intercom) button
Press and hold for 2 seconds to
make an intercom call (if you
have more than one handset).
Where to find it
CHARGE light
This comes on when the handset'¡¯s
batteries are being charged.
PHONE
Press to begin or answer a phone call.
Press during a call to switch the
speakerphone on and off.
(Note: the speakerphone won’t work
if the batteries are low.)
Left and right Soft buttons
Press to select the functions shown
above them on the display (for
example,
If the display is blank
Press the button to switch the handset on
Display
For details of how to change the
screen background, refer to the
functions in the
section headed ‘Quick reference
guide to the menus’.
Before you can use the handset to make calls you will need to fit
and fully charge the batteries, as described on pages 5to 6.
HANDSET LOCATOR button
Press to make all registered handsets
ring (useful if you've forgotten
where you put a handset).
R (Recall) button#
Press and hold this button for a Recall signal.
IN USE light
Arrow buttons
Press or
Press to navigate through the menu on the
display.
Press in idle mode for short-cut functions
during a call to adjust the
volume in the earpiece.
to go straight to the
menu. SMS text
messages
to go straight to a list of
(CID) records. Caller
Display
HANG UP /C/ button
Press to end a call.
Press while using menus to cancel and
return to idle mode.
Press and hold for 2 seconds to turn
the handset on and off.
Short cuts
To subscribe to network features like Caller Display and Call Waiting,
simply call your network service provider (the company which
supplies your telephone line). You don’t need to do anything special
on your Symphony 2600 phone to set these features up.
to go straight to a list of
records. redial
).
Menu Back
or
button
Wallpaper
button
Handfree
CID
connection to the telephone line.
Flashes when you have a
Flashes when you have message(s).
CID
Contents
Read these notes first 3
Choosing a site for the base unit and
charger pod 3
Radio signals between handset and
base unit 3
Mains power connection 3
Installation and set-up 4
Before you start
Electrical safety
Interference
‘Out of range’ warning
Exploring the display
Shortcut buttons 9
To lock the keypad
Switching on and off
Ringer melodies and volumes 11
Your handset’s name 12
Time and date 13
Making and answering calls 14
To make a call 14
To answer a call 14
To end a call 15
The speakerphone 15
Muting the microphone 15
Earpiece volume 15
Last Number Redial 16
… and options in the Redial list 16
The Phone Book
(memory dialling) 18
To open the Phone Book 18
To store a number 18
To make a memory call (short-cut
method) 19
To make a memory call (Phone Book
method) 19
To change a stored number 20
To delete a Phone Book entry 21
To delete all Phone Book entries 21
Caller Display 22
To review Caller Display records
(shortcut) 23
To review all call information 23
Options in the Caller Display lists 24
… to delete a entry from the list 24
… to store a number in the Phone Book
24
Using a multi-handset system 25
To make an intercom call 25
To end an intercom call 25
To transfer a call 26
To shuttle between two calls 26
To set up a three-way conference
27
To page all handsets from the
base unit 27
continued overleaf …
1
Handset registration 28
To re-register or to register a new
handset 28
To register to a different brand of
base unit
Binatone Help Line: 0845 345 9677
(Local Call rate)
8
8
889
10 11
… to delete all entries from the list 24
29
SMS text messaging — read
thisfirst
Caller Display
Registering for the SMS service
The SMS Send and Receive numbers
SMS message boxes
30
30 30
31 31
Contents
2
SMS text messaging
To write and send a text message
you hear an error tone
To read your messages
… and to store a caller’s number in the
Phone Book
… or to delete messages from the Inbox
To reply to a message
To delete a message from the Outbox
or Draft Box
To check or change the Send and
Receive numbers
Quick reference guide to the
menus
Troubleshooting
Cleaning and care
Declaration of conformity
Guarantee and service
Technical details
Connection and conditions for use
You can connect your Symphony
a line connected to a local exchange, with its own phone number; to an
extension socket connected to a DEL; or to an extension on an
approved compatible PBX. Do not connect the Symphony
extension to a payphone.
The ringer equivalence numbers (RENs) of all instruments (phones,
fax machines, etc.) connected to an exchange line must not add up to
more than 4 — otherwise, one or more of them may not ring and/or
answer calls correctly. The Symphony
other telephones have a REN of 1 unless marked otherwise.
http://www.binatoneonline.com/
...If
To forward a message to another
receiver
To switch SMS receotion on
To change write format
33
33
35
35
36
36 37
37
38
38
39
39
40
45
51
52
53
54
To select the send server
39
2600 to a direct exchange line (DEL) —
2600 as an
2600 has a REN of 1, and most
Read these notes first
Choosing a site
for the base
unit and
charger pod
The base unit and charger pod(s) should be placed on a
level surface, in a position where:
■the mains adapter plug will reach an easily accessible
230-V AC switched mains supply socket — never try
to lengthen the mains power cable
■the base unit’s telephone line cable will reach your
telephone line socket or extension socket (the charger
pod does not have a telephone line connection)
■it is not close to another telephone — this can cause
radio interference
■it is not close to a sink, bath or shower, or anywhere
else where it might get wet
■it is not close to other electrical equipment — fridges,
washing machines, microwave ovens, fluorescent
lights, TVs etc.
!If you’re using the SMS text messaging facility,
please note that only one SMS phone connected to
the line can receive messages. So you shouldn’t
connect another SMS-compatible phone to the same
line as your Symphony
Radio signals
between
handset and
base unit
To use your handset and base unit together, you must
be able to establish a radio link between them. Be
aware that:
■Any large metal object — like a refrigerator, a mirror
or a filing cabinet — between the handset and the
base unit may block the radio signal.
■Other solid structures, like walls, may reduce the
signal strength.
Mains power
connection IMPORTANT — The Symphony
charger pod must be used with the mains adapter
supplied with the unit. Using any other adapter will
result in non-compliance with EN60950, and will
invalidate any approval given to this apparatus.
Binatone Help Line: 0845 345 9677
(Local Call rate)
3
2600.
2600 base unit and
Installation and set-up
4
1
3
Choose a suitable site for the
base unit See page 3
Plug the mains adapter into a 230 V AC, 50 Hz mains
socket, with the switch on the socket set to OFF
Connect the mains
power lead and the
telephone line cord
into the underside of
the base unit
2
Use the telephone line
cord supplied with your
Symphony
not use any other
telephone line cord
See the note
on page 3
4Switch on at the mains socket
http://www.binatoneonline.com/
2600 — do
Installation and set-up
5
Fit the rechargeable batteries in each handset
7
A+
–
. Fit the two batteries as shown,
making sure you match the and
ends to the markings in the
battery compartment
B. Fit the battery compartment
cover, sliding it into place
and pressing firmly to make
sure it is secure
Battery safety
—batteries in the handset they may
burst, causing damage. Use the
rechargeable batteries supplied.
6
5
Plug the mains adapter into a 230 V AC,
50 Hz mains socket, with the switch on
the socket set to OFF
Switch on at the mains socket
If you have one or more charger pods …
See the note
on page 3
Caution : DON’T use non-rechargeable
Binatone Help Line: 0845 345 9677
(Local Call rate)
--
+
++
-
Installation and set-up
8Charge the batteries for 15 hours
The battery charge level symbol should
increase by one bar every half hour when
you’re charging an empty battery. If you
think that the symbol isn’t showing the
correct battery charge level, remove and
refit the batteries.
Keeping the batteries charged
n
n
When you don’t need to use the
handset (for example, overnight or
when you go out), replace it on the
base unit or charger pod, to keep the
batteries charged.
Whenever the battery charge level
symbol shows ‘nearly empty’( ),
place the handset on the base unit or
charger pod to charge the batteries.
Before you use the handset for the first time,
it’s important to charge the batteries fully.
The handset ‘beeps’ when it’s correctly in
position on the charging cradle.
Leave the handset on the charging cradle
for 15 hours.
Make sure mains power is
switched on at the socket if you
want to use the phone — it will
not work without electrical power
Connect the base unit to the telephone line
Switch off power at the mains socket
Insert the telephone line plug into the
socket as shown
Switch mains power back on
9
Use the plug
to raise the
shutter before
pushing it
into the
socket
NOTE: the charger pod does not have
a connection to the telephone line.
Battery charge
level symbol
The Charge
light comes on.
http://www.binatoneonline.com/
6
CID
e
li
f
o
r
p
r
e
tn
i
rp
KY
M
C
c
i
re
n
eG :e
l
ifor
p
r
o
lo
C
n
ee
r
cs tl
u
af
e
D
etisopmoC
7
Installation and set-up
Binatone Help Line: 0845 345 9677
(Local Call rate)
If you have a Broadband line
If you connet your telephone to a line with broadband connection,
you will need to insert a microfilter(not included) between the
telephone and telephone line,otherwise you may get interference
between the telephone and the broadband,whichcould cause
problems.
In a home with broadband,every telephone must have a microfilter
connected,not just the one at the telephone point that your modem
is connected to.If you need more broadband microfilters,contact
your broadband supplier.
10
CID
Inhaltsverzeichnis
Andere Binatone Schnurloses Telefon Handbücher
Binatone
Binatone ICARUS 2010 system Bedienungsanleitung
Binatone
Binatone SYMPHONY 2200 Bedienungsanleitung
Binatone
Binatone Lifestyle 100 Bedienungsanleitung
Binatone
Binatone SYMPHONY 2210 Bedienungsanleitung
Binatone
Binatone Style 1820 Bedienungsanleitung
Binatone
Binatone Brick 4home edition Bedienungsanleitung
Binatone
Binatone Lifestyle 1910 Bedienungsanleitung
Binatone
Binatone ICARUS 1210 Bedienungsanleitung
Binatone
Binatone The brick Bedienungsanleitung
Binatone
Binatone Vesta 1305 Call Blocker Bedienungsanleitung
Binatone
Binatone 1210 Bedienungsanleitung
Binatone
Binatone Fusion 2815 Bedienungsanleitung
Binatone
Binatone Elite 2025 Bedienungsanleitung
Binatone
Binatone FUSION 2925 Bedienungsanleitung
Binatone
Binatone ICARUS 1500 Bedienungsanleitung
Binatone
Binatone iDECT X1i Bedienungsanleitung
Binatone
Binatone iDECT Eclipse Plus Single Bedienungsanleitung
Binatone
Binatone Activity 2600 Bedienungsanleitung
Binatone
Binatone SPEAKEASY COMBO 2005 TRIPLE Bedienungsanleitung
Binatone
Binatone E3300 Bedienungsanleitung
