3. Safety Instruction
3.1 Using Your Dash Camera in the Car
1). Do not install the device within the driver’s or
passenger airbag operation range. Please refer to
your car’s service manual for details about the
operation range of your car’s airbags.
2). Never modify modes, settings, or program your
device while your car is in motion.
3). Ensure the device and its power cordage installed
as per the instructions “5.1 Installing your Device”,
and do not obstruct the driver’s line of sight or
impede the operation of any driving controls.
3.2 Battery
Your dash camera device uses a Li-polymer battery.
1). Do not use it in humid, wet or corrosive
environments.
2). Do not operate or store your dash camera in high
temperatures (>60°) or in direct sun light.
3). Do not pierce or break the battery casing. Failure
to follow these cautions will invalidate the warranty
and may cause the battery to leak acid, become hot,
explode or ignite and cause injury or damage. If you
come into contact with leaked battery acid wash the
contact area thoroughly and seek medical attention.
4
