Biochef Synergy Bedienungsanleitung
USER MANUAL AND RECIPES
Synergy
Slow Juicer
ENGLISH 3
EN
FRANÇAIS 21
FR
DEUTSCH 41
DE
ESPAÑOL 63
ES
ITALIANO 83
IT
DUTCH 105
NL
The information in this manual is intended to help
you to get the best results from your BioChef
Synergy Slow Juicer. Please read and follow these
instructions and safeguards prior to use.
Please keep your manual handy for future
reference, warranty information and support details
4
Safety Precautions
! Read all instructions.
! To protect against risk of electrical shock, do not put the body (motor) in
water or any other liquid .
! Close supervision is necessary when any appliance is used by children.
! Unplug from electrical outlet when not in use and before disassembly
for cleaning.
! Avoid contact with moving parts.
! Do not operate appliance with a damaged cord or plug.
! The use of attachments not recommended or sold by the manufacturer
may cause damage and will void warranty.
! Do not let cord hang over edge of counter.
! Make sure the motor has stopped completely before dissembling.
! Do not put your ngers or other objects into the juicer while it is in
operation. If food becomes lodged in the opening, use the provided
food plunger to push it down or press the button into reverse mode. If
ingredients are still lodged in the juicing drum, turn o and disassemble
to remove remaining food. You may need to cut produce smaller, or feed
ingredients slower into the chute to prevent this.
EN
5
Parts and Accessories
1 Hopper and
Feeding
Chute
2 Bowl (drum)
3 Motor Base
4 Spinning
Basket
5 Extrane,
Coarse
Strainer
6 Tamper
7 Auger
8 Pulp
Container
9 Juice
Container
10 Cleaning
Brush
1
2
3
4
7
8
5
6
9
10
EN
6
Step 5
Align the open
triangles on the hopper
and twist the hopper
clockwise until the
lock position.
Step 2
Placethebowlrmly
onto the base.
Step 4
Insert auger into
strainer/spinning
basket. Wind clockwise
untilitissittingrmlyin
the bowl.
Step 3
Place the desired strainer
into the spinning basket
and then place these into
the bowl, aligning the
triangle on the strainer with
the triangle on the bowl.
Assembly Instructions
Step 1
Ensure the yellow pulp
plug at the base of the
bowl has been inserted
rmlyintotheoutlet.
EN
7
Operating Instructions
Press the power switch into the On position. Insert ingredients into the feeding
chute individually. For best results add ingredients at an even slow pace to
ensure maximum extraction is achieved..
CHOOSE YOUR STRAINER
Fine Strainer
Theholesofthenestraineraresmallerandproduce
a more pulp free juice. Use this strainer when making
juice with hard fruits and vegetables or ingredients high
inbre.
Coarse Strainer
The bigger holes in the strainer produce thicker juice.
Use this strainer for soft fruit such as strawberries, kiwi
fruit, citrus and tomatoes.
REVERSE FUNCTION
If you notice any ingredients have become stuck or are refusing to move
use the tamper to gently push ingredients downwards. The reverse switch is
specicallyforthisreason.Pressthereverseswitchdownfor3-5secondsand
repeat2-3timesifnecessary.
Once the auger has come to a complete stop press the forward switch
to continue.
JUICE OUTLET CAP
Close the juice outlet cap to mix your juice inside your juicer. Open the juice
outlet cap to dispense as required.
EN
8
Troubleshooting
My juicer
does not
operate when
the switch
is in the ON
position
1. Make sure the power cord is properly secured into
the power source and that the switch is turned to
the ‘ON’ position.
2. Check that the hopper is assembled correctly.
PLEASE NOTE: If the hopper has not been securely
locked in place with the arrows aligning, the
appliance will not work for safety reasons. This
is due to a magnetic safety strip located inside
the hopper which must align with the matching
magnetic strip inside the base.
3. Check the appliance has been assembled
according to the instructions in this manual.
My juicer
has stopped
during
operation
If your juicer has stopped during operation, please
check that the hopper is correctly aligned with the
base. If the alignment shifts during operation the
juicerwillsimplyturno.Turnyourjuicero,reset
the hopper and you should be able to continue.
The Synergy Slow Juicer has an automatic motor
cutosafetyfeaturethatwillactivateifthejuiceris
overloaded. This has been designed to help prevent
accidental damage and to help extend the life of
themachine.ToresetyourjuicertakeotheHopper
lid and remove any ingredients in the juice bowl.
If necessary switch the juicer into Reverse/REV to
unwindanybrethatiscaughtaroundtheauger.
EN
9
The hopper
will not open
Thehopperopensinananti-clockwiseway.Ifthe
hopper will not open easily, try the following:
1. Allow your BioChef Synergy Slow Juicer to run
withoutaddingmoreingredientsbeforeturningo
and attempting to remove the hopper.
2. Switch your juicer into reverse for a few moments to
help dislodge any remaining ingredients around the
auger and feeding chute of the hopper.
PLEASE NOTE: The auger turns in a clockwise direction
which is opposite of the hopper. This may cause an
unintentional tightening of the hopper and result in
dicultyreleasingthehopperfromthejuicingbowl.
3. After you have fed the last ingredients into the
hopper, let it run until all the juice and pulp has run
through the machine. Pour one or two glasses of
waterdownthehoppertoushoutmuchoftheleft
over pulp.
4. Liftotheentirejuicingsectionbeforetryingto
separate.
What is the
dierence
between the
ne strainer
and coarse
strainer?
The‘nestrainer’istheonewithsmallholesinthe
stainless steel section of the part. This strainer is best
usedforhardrmingredients,mostlyvegetablessuchas
carrots and beetroots.
The ‘coarse strainer’ has bigger holes in the stainless
steel section of the part. Use this strainer for ingredients
that are of a more pulpy nature, or if you want a juice
which is more pulpy or thicker in consistency. Regarding
strainer selection for suitable ingredients, please refer to
page 7.
EN
10
Juice is
leaking over
the base
Due to the drum seal located in the bottom of the
bowl not being watertight some leaking may occur.
The seal has been designed this way to prevent
excess heat caused by the friction against the silicone
as the auger is turning. If you are experiencing a large
amount of leaking it may be time to replace the drum
seal, please contact the Customer Care Centre or
website for ordering replacement parts.
The bowl
shakes when
squeezing
A slight shaking of the motor while in operation is
completely normal. Variations beyond this depend on
thebrecomponentsoftheingredients.Hardortough
ingredients such as carrots and beetroots may cause
the bowl to shake more than soft and juicy ingredients.
My juice is a
little pulpy,
how can I x
this?
1. Make sure the yellow silicone plug is fully inserted
into its slot. This part is removable to assist with
cleaning but is often not reinserted correctly. It
acts as a pressure point to ensure that the pulp is
ejected from the pulp tube.
2. The outlet can sometimes get blocked if
ingredients are fed too quickly into the juicer.
Please try slowing down the rate at which you insert
produce into the juicer.
3. Try cutting ingredients into smaller pieces (3 to
5cm) so the vertical auger will be able to fully crush
and process before the next ingredient is fed in.
4. Freshandrefrigeratedingredientswillhavermer
bresandgreaterwatercontentandwillbeless
pulpy in constitution.
5. Over time, the silicone spinning basket blades may
become blunt. Please contact the Customer Care
Centre or website for ordering replacement parts.
EN
Inhaltsverzeichnis
Andere Biochef Entsafter Handbücher
