Biostar H61MHP Benutzerhandbuch
H61MHP/H61MGP/H61MLP/H61MGP2 Setup Manual
FCC Information and Copyright
This equipment has been tested and found to comply with the limits of a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. There is no guarantee that interference will not occur in a particular
installation.
The vendor makes no representations or warranties with respect to the contents here and
specially disclaims any implied warranties of merchantability or fitness for any purpose.
Further the vendor reserves the right to revise this publication and to make changes to
the contents here without obligation to notify any party beforehand.
Duplication of this publication, in part or in whole, is not allowed without first obtaining the
vendor’s approval in writing.
The content of this user’s manual is subject to be changed without notice and we will not
be responsible for any mistakes found in this user’s manual. All the brand and product
names are trademarks of their respective companies.
Dichiarazione di conformità
sintetica
Ai sensi dell’art. 2 comma 3 del D.M.
275 del 30/10/2002
Si dichiara che questo prodotto è
conforme alle normative vigenti e
soddisfa i requisiti essenziali richiesti
dalle direttive
2004/108/CE, 2006/95/CE e
1999/05/CE
quando ad esso applicabili
Short Declaration of conformity
We declare this product is complying
with the laws in force and meeting all
the essential requirements as specified
by the directives
2004/108/CE, 2006/95/CE and
1999/05/CE
whenever these laws may be applied
Table of Contents
Chapter 1: Introduction.......................................... 1
1.1 Before You Start.........................................................................................1
1.2 Package Checklist.....................................................................................1
1.3 Motherboard Features ..............................................................................2
1.4 Rear Panel Connectors ............................................................................3
1.5 Motherboard Layout..................................................................................4
Chapter 2: Hardware Installation ........................... 5
2.1 Installing Central Processing Unit (CPU)...............................................5
2.2 Install a Heatsink .......................................................................................7
2.3 Fan Headers ..............................................................................................8
2.4 Installing System Memory........................................................................9
2.5 Expansion Slots.......................................................................................11
2.6 Jumper Setting.........................................................................................12
2.7 Headers & Connectors ...........................................................................13
Chapter 3: Useful Help ......................................... 16
3.1 Driver Installation Note ...........................................................................16
3.2 Software....................................................................................................17
3.3 Extra Information .....................................................................................24
3.4 AMI BIOS Beep Code.............................................................................25
3.5 Troubleshooting.......................................................................................25
Appendix: SPEC In Other Languages .................... 26
German .................................................................................................................26
French ...................................................................................................................28
Italian .....................................................................................................................30
Spanish..................................................................................................................32
Portuguese ...........................................................................................................34
Polish.....................................................................................................................36
Russian .................................................................................................................38
Arabic.....................................................................................................................40
Japanese...............................................................................................................42
H61MHP/H61MGP/H61MLP/H61MGP2
1
CHAPTER 1: INTRODUCTION
1.1 Before You Start
Thank you for choosing our product. Before you start installing the
motherboard, please make sure you follow the instructions below:
Prepare a dry and stable working environment with sufficient
lighting.
Always disconnect the computer from power outlet before
operation.
Before you take the motherboard out from anti-static bag,
ground yourself properly by touching any safely grounded
appliance, or use grounded wrist strap to remove the static
charge.
Avoid touching the components on motherboard or the rear
side of the board unless necessary. Hold the board on the
edge, do not try to bend or flex the board.
Do not leave any unfastened small parts inside the case after
installation. Loose parts will cause short circuits which may
damage the equipment.
Keep the computer from dangerous area, such as heat
source, humid air and water.
The operating temperatures of the computer should be 0 to
45 degrees Celsius.
To avoid injury, be careful of:
Sharp pins on headers and connectors
Rough edges and sharp corners on the chassis
Damage to wires that could cause a short circuit
1.2 Package Checklist
;Serial ATA Cable x2
;Rear I/O Panel for ATX Case x1
;Quick Installation Guide x1
;Fully Setup Driver DVD x1
Note: The package contents may be different due to the sales region or models in which it was
sold. For more information about the standard package in your region, please contact your dealer
or sales representative.
Motherboard Manual
2
1.3 Motherboard Features
SPEC
CPU Socket 1155
Intel Core i7 / i5 / i3 / Pentium / Celeron processor
Supports Execute Disable Bit / Enhanced Intel SpeedStep®
/ Intel Architecture-64 / Extended Memory 64 Technology /
Virtualization Technology / Hyper Threading
Chipset Intel H61
Super I/O
IT8728
Provides the most commonly used legacy Super
I/O functionality
Low Pin Count Interface
Environment Control initiatives
Hardware Monitor Controller
Fan Speed Controller
ITE's "Smart Guardian" function
Main Memory
DDR3 DIMM Slots x 2
Max Memory Capacity 16GB
Each DIMM supports 512MB/ 1GB/2GB/4GB/8GB
DDR3
Dual Channel Mode DDR3 memory module
Supports DDR3 1066 / 1333 / 1600 (depending on CPU)
Registered DIMM and ECC DIMM is not supported
SATA 2 Integrated Serial ATA Controller Data transfer rates up to 3.0 Gb/s
SATA Version 2.0 specification compliant
LAN
RTL8111G (H61MHP & H61MGP & H61MGP2)
10 / 100 /1000Mb/s auto negotiation Half / Full duplex capability
RTL8106E (H61MLP)
10 / 100 Mb/s auto negotiation Half / Full duplex capability
Sound Codec ALC662 5.1 channels audio out
High Definition Audio
PCI-E Gen3x16 slot x1 Supports PCI-E Gen2/3 x16 expansion card(depending on
CPU)
PCI-E Gen2 x1 slot x1 Supports PCI-E Gen2 x1 expansion card
Slots
PCI slot x1 Supports PCI expansion card
SATA2 Connector x4 Each connector supports 1 SATA2 device
Front Panel Connector x1 Supports front panel facilities
Front Audio Connector x1 Supports front panel audio function
CPU Fan Header x1 CPU Fan power supply (with Smart Fan function)
System Fan Header x1 System Fan Power supply
Clear CMOS Header x1 Restore CMOS data to factory default
USB2.0 Connector x2 Each connector supports 2 front panel USB2.0 ports
Power Connector (24pin) x1 Connects to Power supply
On Board
Connectors
Power Connector (4pin) x1 Connects to Power supply
Rear Panel
I/O
PS/2 Keyboard x1
PS/2 Mouse x1
VGA Port x1
HDMI Port x1
Serial Port x1
Printer Port x1
LAN port x1
USB2.0 Port x4
Audio Jack x3
Connects to PS/2 Keyboard
Connects to PS/2 Mouse
Connect to D-SUB monitor
Connect to HDMI monitor (only for H61MHP)
Provide RS-232 Serial connection
Provide 1 connection for printer (except H61MGP2)
Connect to RJ-45 Ethernet cable
Connect to USB2.0 devices
Provide Audio-In/Out and Mic. connection
Board Size 174 (W) x 235 (L) mm uATX
OS Support Windows XP / Vista / 7 / 8 Biostar reserves the right to add or remove support for any
OS with or without notice
H61MHP/H61MGP/H61MLP/H61MGP2
3
1.4 Rear Panel Connectors
H61MHP
H61MGP & H61MLP
H61MGP2
Note 1: HDMI & VGA Output require an Intel Core family processor with Intel Graphics Technology.
Note 2: Since the audio chip supports High Definition Audio Specification, the function of each
audio jack can be defined by software. The input / output function of each audio jack listed
above represents the default setting. However, when connecting external microphone to
the audio port, please use the Line In (Blue) and Mic In (Pink) audio jack.
Note 3: Maximum resolution:
HDMI: 1920 x 1200 @60Hz
VGA: 2048 x 1536 @75Hz
Motherboard Manual
4
1.5 Motherboard Layout
Note: ■represents the 1st pin.
H61MHP/H61MGP/H61MLP/H61MGP2
5
CHAPTER 2: HARDWARE INSTALLATION
2.1 Installing Central Processing Unit (CPU)
Step 1: Locate the CPU socket on the motherboard
Note1: Remove Pin Cap before installation, and make good preservation for future use. When
the CPU is removed, cover the Pin Cap on the empty socket to ensure pin legs won’t be
damaged.
Note2: The motherboard might equip with two different types of pin cap. Please refer below
instruction to remove the pin cap.
Step 2: Pull the socket locking lever out from the socket then raise the
lever and load plate to the fully open position.
Step 3: Remove the Pin Cap.
Motherboard Manual
6
Step 4: Hold processor with your thumb and index fingers, oriented as
shown. Align the notches with the socket. Lower the processor
straight down without tilting or sliding the processor in the socket.
Step 5: Close the load plate. Pressing down on the load plate, close and
engage the socket lever.
H61MHP/H61MGP/H61MLP/H61MGP2
7
2.2 Install a Heatsink
Step 1: Place the CPU fan assembly on top of the installed CPU and make sure
that the four fasteners match the motherboard holes. Orient the assembly
and make the fan cable is closest to the CPU fan connector.
Ensure the fastener slots are pointing perpendicular to the heatsink.
Step 2: Press down two fasteners at one time in a diagonal sequence to secure
the CPU fan assembly in place. As each fastener locks into position a click
should be heard.
Note1: Do not forget to connect the CPU fan connector.
Note2: For proper installation, please kindly refer to the installation manual of your CPU heatsink.
Motherboard Manual
8
2.3 Fan Headers
These fan headers support cooling-fans built in the computer. The fan cable and
connector may be different according to the fan manufacturer. Connect the fan
cable to the connector while matching the black wire to pin#1.
CPU_FAN1: CPU Fan Header
Pin Assignment
1 Ground
2 +12V
3FAN RPM rate sense
4 Smart Fan Control
SYS_FAN1: System Fan Header
Pin Assignment
1 Ground
2 +12V
3 FAN RPM rate sense
Note: CPU_FAN1, SYS_FAN1 support 4-pin and 3-pin head connectors. When connecting with
wires onto connectors, please note that the red wire is the positive and should be connected to
pin#2, and the black wire is Ground and should be connected to pin#1(GND).
Andere Handbücher für H61MHP
1
Dieses Handbuch passt für folgende Modelle
3
Inhaltsverzeichnis
Andere Biostar Hauptplatine Handbücher
Biostar
Biostar TA880GB - BIOS Benutzerhandbuch
Biostar
Biostar TA970XE Bedienungsanleitung
Biostar
Biostar B365GTQ Bedienungsanleitung
Biostar
Biostar G31-M4 Benutzerhandbuch
Biostar
Biostar A58ML2 Benutzerhandbuch
Biostar
Biostar TA785GE - SETUP Benutzerhandbuch
Biostar
Biostar A55MH Benutzerhandbuch
Biostar
Biostar M7NCG Pro Benutzerhandbuch
Biostar
Biostar M6TWJ Bedienungsanleitung
Biostar
Biostar N4SLI-A9 Bedienungsanleitung
Biostar
Biostar Hi-Fi H81S2 Bedienungsanleitung
Biostar
Biostar B460GTA Bedienungsanleitung
Biostar
Biostar P4TDH Benutzerhandbuch
Biostar
Biostar Z790 VALKYRIE Bedienungsanleitung
Biostar
Biostar 6100 AM2 Benutzerhandbuch
Biostar
Biostar M7NCG400 Benutzerhandbuch
Biostar
Biostar G31-M7 OC - SETUP Bedienungsanleitung
Biostar
Biostar U8788 Bedienungsanleitung
Biostar
Biostar GF7100P-M7 - BIOS SETUP Benutzerhandbuch
Biostar
Biostar K8NBP Bedienungsanleitung
Beliebte Hauptplatine Handbücher anderer Marken
Telit Wireless Solutions
Telit Wireless Solutions SL869-3DR Bedienungsanleitung
Gigabyte
Gigabyte GA-9IVDT Bedienungsanleitung
Texas Instruments
Texas Instruments ADS8372EVM Bedienungsanleitung
Commell
Commell MS-C73 Bedienungsanleitung
IBT Technologies
IBT Technologies MB860 Bedienungsanleitung
Nvidia
Nvidia TEGRA DG-04927-001_V01 Bedienungsanleitung
