Biostar H61MHV2 Benutzerhandbuch
H61MHV2 Setup Manual
FCC Information and Copyright
This equipment has been tested and found to comply with the limits of a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. There is no guarantee
that interference will not occur in a particular installation.
The vendor makes no representations or warranties with respect to the
contents here and specially disclaims any implied warranties of merchantability
or fitness for any purpose. Further the vendor reserves the right to revise this
publication and to make changes to the contents here without obligation to
notify any party beforehand.
Duplication of this publication, in part or in whole, is not allowed without first
obtaining the vendor’s approval in writing.
The content of this user’s manual is subject to be changed without notice and
we will not be responsible for any mistakes found in this user’s manual. All the
brand and product names are trademarks of their respective companies.
Dichiarazione di conformità
sintetica
Ai sensi dell’art. 2 comma 3 del D.M.
275 del 30/10/2002
Si dichiara che questo prodotto è
conforme alle normative vigenti e
soddisfa i requisiti essenziali richiesti
dalle direttive
2004/108/CE, 2006/95/CE e
1999/05/CE
quando ad esso applicabili
Short Declaration of conformity
We declare this product is complying
with the laws in force and meeting all
the essential requirements as specified
by the directives
2004/108/CE, 2006/95/CE and
1999/05/CE
whenever these laws may be applied
Questo manuale d’istruzione è fornito da trovaprezzi.it. Scopri tutte le offerte per Biostar H61MHV2
o cerca il tuo prodotto tra le migliori offerte di Schede Madri
Table of Contents
Chapter 1: Introduction.......................................... 1
1.1 Before You Start.........................................................................................1
1.2 Package Checklist .....................................................................................1
1.3 Motherboard Features..............................................................................2
1.4 Rear Panel Connectors..............................................................................3
1.5 Motherboard Layout.................................................................................3
Chapter 2: Hardware Installation........................... 4
2.1 Installing Central Processing Unit (CPU) ...............................................4
2.2 Install a Heatsink ......................................................................................6
2.3 FAN Headers..............................................................................................7
2.4 Installing System Memory ........................................................................8
2.5 Connectors and Slots..................................................................................9
Chapter 3: Headers & Jumpers Setup................... 12
3.1 How to Setup Jumpers ............................................................................12
3.2 Detail Settings..........................................................................................12
Chapter 4: Useful Help ......................................... 15
4.1 Driver Installation Note..........................................................................15
4.2 BIOS Update.............................................................................................16
4.3 AMI BIOS Beep Code ...............................................................................18
4.4 Troubleshooting.......................................................................................18
Appendix: SPEC in Other Languages..................... 21
German .................................................................................................................21
French ..................................................................................................................23
Italian ..................................................................................................................25
Spanish ..................................................................................................................27
Portuguese............................................................................................................29
Polish ...................................................................................................................31
Russian ..................................................................................................................33
Arabic ..................................................................................................................35
Japanese................................................................................................................37
H61MHV2
1
CHAPTER 1: INTRODUCTION
1.1 BEFORE YOU START
Thank you for choosing our product. Before you start installing the
motherboard, please make sure you follow the instructions below:
Prepare a dry and stable working environment with sufficient
lighting.
Always disconnect the computer from power outlet before
operation.
Before you take the motherboard out from anti-static bag,
ground yourself properly by touching any safely grounded
appliance, or use grounded wrist strap to remove the static
charge.
Avoid touching the components on motherboard or the rear
side of the board unless necessary. Hold the board on the
edge, do not try to bend or flex the board.
Do not leave any unfastened small parts inside the case after
installation. Loose parts will cause short circuits which may
damage the equipment.
Keep the computer from dangerous area, such as heat
source, humid air and water.
The operating temperatures of the computer should be 0 to
45 degrees Celsius.
To avoid injury, be careful of:
Sharp pins on headers and connectors
Rough edges and sharp corners on the chassis
Damage to wires that could cause a short circuit
1.2 PACKAGE CHECKLIST
Serial ATA Cable x2
Rear I/O Panel for ATX Case x1
Quick Installation Guide x1
Fully Setup Driver DVD x1
Note: The package contents may be different due to the sales region or models in which it was
sold. For more information about the standard package in your region, please contact your
dealer or sales representative.
Motherboard Manual
2
1.3 MOTHERBOARD FEATURES
SPEC
CPU
Socket 1155
Intel Core i7 / i5 / i3 / Pentium / Celeron
processor
Supports Execute Disable Bit / Enhanced Intel
SpeedStep® / Intel Architecture-64 / Extended
Memory 64 Technology / Virtualization Technology /
Hyper Threading
Chipset Intel H61
Super I/O
IT8772E
Provides the most commonly used legacy
Super I/O functionality
Low Pin Count Interface
Environment Control initiatives
Hardware Monitor Controller
Fan Speed Controller
ITE's "Smart Guardian" function
Main
Memory
DDR3 DIMM Slots x 2
Max Memory Capacity 16GB
Each DIMM supports 512MB/
1GB/2GB/4GB/8GB DDR3
Dual Channel Mode DDR3 memory module
Supports DDR3 1066 / 1333
Supports DDR3 1600 (depending on CPU)
Registered DIMM and ECC DIMM is not supported
SATA 2 Integrated Serial ATA Controller Data transfer rates up to 3.0 Gb/s
SATA Version 2.0 specification compliant
LAN RTL8111H 10 / 100 / 1000Mb/s auto negotiation
Sound
Codec ALC662 5.1 channels audio out , High Definition Audio
Slots
PCI-E Gen3x16 slot x1
(depending on CPU)
Supports PCI-E Gen2/3 x16 expansion card
PCI-E Gen2 x1 slot x1 Supports PCI-E Gen2 x1 expansion card
On Board
Connectors
SATA2 Connector x4 Each connector supports 1 SATA2 device
Front Panel Connector x1 Supports front panel facilities
Chassis Speaker Connector x1 Supports chassis speaker
Front Audio Connector x1 Supports front panel audio function
CPU Fan Header x1 CPU Fan power supply (with Smart Fan function)
System Fan Header x1 System Fan Power supply
Clear CMOS Header x1 Restore CMOS data to factory default
USB2.0 Connector x2 Each connector supports 2 front panel USB2.0 ports
Serial Port Connector x1 Connects to RS-232 Port
Power Connector (24pin) x1 Connects to Power supply
Power Connector (4pin) x1 Connects to Power supply
Rear Panel
I/O
PS/2 Keyboard/ Mouse x1
VGA Port x1
HDMI Port x1
LAN port x1
USB2.0 Port x4
Audio Jack x3
Connects to PS/2 Keyboard & Mouse
Connect to D-SUB monitor
Connect to HDMI monitor
Connect to RJ-45 Ethernet cable
Connect to USB2.0 devices
Provide Audio-In/Out and Mic. Connection
Board Size 170 (W) x 191 (L) mm
OS Support Windows XP / Vista / 7 / 8 / 8.1 / 10 Biostar reserves the right to add or remove support
for any OS with or without notice
H61MHV2
3
1.4 REAR PANEL CONNECTORS
Note1: VGA Output requires an Intel Core family processor with Intel Graphics Technology.
Note2: VGA Maximum resolution: 2048 x 1536 @75Hz
1.5 MOTHERBOARD LAYOUT
Note1: ■represents the 1st pin.
Motherboard Manual
4
CHAPTER 2: HARDWARE INSTALLATION
2.1 INSTALLING CENTRAL PROCESSING UNIT (CPU)
Step 1: Locate the CPU socket on the motherboard
Note1: Remove Pin Cap before installation, and make good preservation for future use. When
the CPU is removed, cover the Pin Cap on the empty socket to ensure pin legs won’t be
damaged.
Note2: The motherboard might equip with two different types of pin cap. Please refer below
instruction to remove the pin cap.
Step 2: Pull the socket locking lever out from the socket and then raise the lever
up.
Step 3: Remove the Pin Cap.
H61MHV2
5
Step 4: Hold processor with your thumb and index fingers, oriented as shown.
Align the notches with the socket. Lower the processor straight down
without tilting or sliding the processor in the socket.
Note: The CPU fits only in one correct orientation. Do not force the CPU into the socket
to prevent damaging the CPU.
Step 5: Hold the CPU down firmly, and then lower the lever to locked position to
complete the installation.
Motherboard Manual
6
2.2 INSTALL A HEATSINK
Step 1: Place the CPU fan assembly on top of the installed CPU and make sure
that the four fasteners match the motherboard holes. Orient the assembly
and make the fan cable is closest to the CPU fan connector.
Step 2: Press down two fasteners at one time in a diagonal sequence to secure
the CPU fan assembly in place. Ensure that all four fasteners are secured.
Note1: Do not forget to connect the CPU fan connector.
Note2: For proper installation, please kindly refer to the installation manual of your CPU
heatsink.
H61MHV2
7
2.3 FAN HEADERS
These fan headers support cooling-fans built in the computer. The fan cable and
connector may be different according to the fan manufacturer. Connect the fan
cable to the connector while matching the black wire to pin#1.
CPU_FAN1: CPU Fan Header
Pin Assignment
1 Ground
2 +12V
3 FAN RPM rate sense
4 Smart Fan Control
(By Fan)
SYS_FAN1: System Fan Header
Pin Assignment
1 Ground
2 +12V
3 FAN RPM rate sense
Note: CPU_FAN1 support 4-pin and 3-pin head connectors. When connecting with wires
onto connectors, please note that the red wire is the positive and should be connected to
pin#2, and the black wire is Ground and should be connected to GND.
SYS_FAN3 support 3-pin head connectors. When connecting with wires onto connectors,
please note that the red wire is the positive and should be connected to pin#2, and the black
wire is Ground and should be connected to GND.
Motherboard Manual
8
2.4 INSTALLING SYSTEM MEMORY
A. Memory Modules
Step 1: Unlock a DIMM slot by pressing the retaining clips outward. Align a DIMM
on the slot such that the notch on the DIMM matches the break on the slot.
Step 2: Insert the DIMM vertically and firmly into the slot until the retaining chip snap
back in place and the DIMM is properly seated.
Note: If the DIMM does not go in smoothly, do not force it. Pull it all the way out and try again.
Inhaltsverzeichnis
Andere Biostar Hauptplatine Handbücher
Biostar
Biostar TA790GX XE - BIOS Benutzerhandbuch
Biostar
Biostar P4 TSP-D2 Bedienungsanleitung
Biostar
Biostar A320MH PRO Bedienungsanleitung
Biostar
Biostar NF61S MICRO AM2 SE Benutzerhandbuch
Biostar
Biostar I945G-M7 Bedienungsanleitung
Biostar
Biostar A10N-8800E Bedienungsanleitung
Biostar
Biostar A785G3 PLUS - BIOS 2 Bedienungsanleitung
Biostar
Biostar BIPV10-IA Benutzerhandbuch
Biostar
Biostar G31-M7 Benutzerhandbuch
Biostar
Biostar B550M-SILVER Bedienungsanleitung
Biostar
Biostar M7VIB Bedienungsanleitung
Biostar
Biostar TFORCE 550 SE Bedienungsanleitung
Biostar
Biostar TA880GB - BIOS Bedienungsanleitung
Biostar
Biostar H310MHD PRO Bedienungsanleitung
Biostar
Biostar H110M-BTC Bedienungsanleitung
Biostar
Biostar M6SBA Anleitungen und Rezepte
Biostar
Biostar TA770A2SE Benutzerhandbuch
Biostar
Biostar A770 A2G PLUS - BIOS Benutzerhandbuch
Biostar
Biostar T5XE CFX-SLI Benutzerhandbuch
Biostar
Biostar Racing X570GTA Bedienungsanleitung
Beliebte Hauptplatine Handbücher anderer Marken
Telit Wireless Solutions
Telit Wireless Solutions SL869-3DR Bedienungsanleitung
Gigabyte
Gigabyte GA-9IVDT Bedienungsanleitung
Texas Instruments
Texas Instruments ADS8372EVM Bedienungsanleitung
Commell
Commell MS-C73 Bedienungsanleitung
IBT Technologies
IBT Technologies MB860 Bedienungsanleitung
Nvidia
Nvidia TEGRA DG-04927-001_V01 Bedienungsanleitung
