Biostar TFORCE4 SLI Benutzerhandbuch

TForce4 SLI BIOS Setup

BIOS Setup....................................................................................... 1

1 Main Menu .....................................................................................................................3

2 Standard CMOS Features ................................................................................................6

3 Advanced BIOS Features.................................................................................................9

4 Advanced Chipset Features ...........................................................................................13

5 Integrated Peripherals ....................................................................................................15

6 Power Management Setup.............................................................................................20

7 PnP/PCI Configurations.................................................................................................23

8 PC Health Status.............................................................................................................25

9 Over Clock Navigator Engine.......................................................................................28

10 CMOS Reload Program...............................................................................................34

TForce4

TForce4TForce4

TForce4 SLI

SLISLI

SLI

BIOS Setup

Introduction

This manual discussed Award™ Setup program built into the ROM BIOS. The Setup

program allows users to modify the basic system configuration. This special information is

then stored in battery-backed RAM so that it retains the Setup information when the power

is turned off.

The Award BIOS™ installed in your computer system’s ROM (Read Only Memory) is a

custom version of an industry standard BIOS. This means that it supports Intel Pentium ®4

processor input/output system. The BIOS provides critical low-level support for standard

devices such as disk drives and serial and parallel ports.

Adding important has customized the Award BIOS™, but nonstandard, features such as

virus and password protection as well as special support for detailed fine-tuning of the

chipset controlling the entire system.

The rest of this manual is intended to guide you through the process of configuring your

system using Setup.

Plug and Play Support

These AWARD BIOS supports the Plug and Play Version 1.0A specification. ESCD

(Extended System Configuration Data) write is supported.

EPA Green PC Support

This AWARD BIOS supports Version 1.03 of the EPA Green PC specification.

APM Support

These AWARD BIOS supports Version 1.1&1.2 of the Advanced Power Management

(APM) specification. Power management features are implemented via the System

Management Interrupt (SMI). Sleep and Suspend power management modes are supported.

Power to the hard disk drives and video monitors can be managed by this AWARD BIOS.

ACPI Support

Award ACPI BIOS support Version 1.0 of Advanced Configuration and Power interface

specification (ACPI). It provides ASL code for power management and device

configuration capabilities as defined in the ACPI specification, developed by Microsoft,

Intel and Toshiba.

TForce4

TForce4TForce4

TForce4 SLI

SLISLI

SLI

PCI Bus Support

This AWARD BIOS also supports Version 2.1 of the Intel PCI (Peripheral Component

Interconnect) local bus specification.

DRAM Support

DDR SDRAM (Double Data Rate Synchronous DRAM) are supported.

Supported CPUs

This AWARD BIOS supports the AMD CPU.

Using Setup

In general, you use the arrow keys to highlight items, press <Enter> to select, use the

<PgUp> and <PgDn> keys to change entries, press <F1> for help and press <Esc> to quit.

The following table provides more detail about how to navigate in the Setup program by

using the keyboard.

Keystroke Function

Up arrow Move to previous item

Down arrow Move to next item

Left arrow Move to the item on the left (menu bar)

Right arrow Move to the item on the right (menu bar)

Move Enter Move to the item you desired

PgUp key Increase the numeric value or make changes

PgDn key Decrease the numeric value or make changes

+ Key Increase the numeric value or make changes

- Key Decrease the numeric value or make changes

Esc key Main Menu – Quit and not save changes into CMOS

Status Page Setup Menu and Option Page Setup Menu – Exit

Current page and return to Main Menu

F1 key General help on Setup navigation keys

F5 key Load previous values from CMOS

F7 key Load the optimized defaults

F10 key Save all the CMOS changes and exit

TForce4

TForce4TForce4

TForce4 SLI

SLISLI

SLI

1 Main Menu

Once you enter Award BIOS™ CMOS Setup Utility, the Main Menu will appear on the

screen. The Main Menu allows you to select from several setup functions. Use the arrow

keys to select among the items and press <Enter> to accept and enter the sub-menu.

Figure 1. Main Menu

Standard CMOS Features

This submenu contains industry standard configurable options.

Advanced BIOS Features

This submenu allows you to configure enhanced features of the BIOS.

Advanced Chipset Features

This submenu allows you to configure special chipset features.

Integrated Peripherals

This submenu allows you to configure certain IDE hard drive options and Programmed

Input/ Output features.

!! WARNING !!

The information about BIOS defaults on manual (Figure

1,2,3,4,5,6,7,8,9) is just for reference, please refer to the BIOS

installed on board, for update information.

TForce4

TForce4TForce4

TForce4 SLI

SLISLI

SLI

Power Management Setup

This submenu allows you to configure the power management features.

PnP/PCI Configurations

This submenu allows you to configure certain “Plug and Play” and PCI options.

PC Health Status

This submenu allows you to monitor the hardware of your system.

OverClock Navigator Engine

ONE provides two powerful overclock engines, MOS & AOS for both

overclock expertises and beginners.

Load Optimized Defaults

This selection allows you to reload the BIOS when the system is having problems

particularly with the boot sequence. These configurations are factory settings optimized

for this system. A confirmation message will be displayed before defaults are set.

Set Supervisor Password

Setting the supervisor password will prohibit everyone except the supervisor from making

changes using the CMOS Setup Utility. You will be prompted with to enter a password.

Set User Password

If the Supervisor Password is not set, then the User Password will function in the same way

as the Supervisor Password. If the Supervisor Password is set and the User Password is

set, the “User” will only be able to view configurations but will not be able to change them.

Save & Exit Setup

Save all configuration changes to CMOS(memory) and exit setup. Confirmation message

will be displayed before proceeding.

TForce4

TForce4TForce4

TForce4 SLI

SLISLI

SLI

Exit Without Saving

Abandon all changes made during the current session and exit setup. confirmation message

will be displayed before proceeding.

Integrate Flashing Program

This is a very safe way to upgrade BIOS.

By pressing “Enter” key for three times, and the upgrading process will be completed

easily.

TForce4

TForce4TForce4

TForce4 SLI

SLISLI

SLI

2 Standard CMOS Features

The items in Standard CMOS Setup Menu are divided into 10 categories. Each category

includes no, one or more than one setup items. Use the arrow keys to highlight the item and

then use the<PgUp> or <PgDn> keys to select the value you want in each item.

Figure 2. Standard CMOS Setup

TForce4

TForce4TForce4

TForce4 SLI

SLISLI

SLI

Main Menu Selections

This table shows the selections that you can make on the Main Menu.

Item Options Description

Date mm : dd : yy Set the system date. Note

that the ‘Day’ automatically

changes when you set the

date.

Time hh : mm : ss Set the system internal

clock.

IDE Primary Master Options are in its sub

menu. Press <Enter> to enter the

sub menu of detailed

options

IDE Primary Slave Options are in its sub

menu. Press <Enter> to enter the

sub menu of detailed

options.

IDE Secondary Master Options are in its sub

menu. Press <Enter> to enter the

sub menu of detailed

options.

IDE Secondary Slave Options are in its sub

menu. Press <Enter> to enter the

sub menu of detailed

options.

Drive A

Drive B 360K, 5.25 in

1.2M, 5.25 in

720K, 3.5 in

1.44M, 3.5 in

2.88M, 3.5 in

None

Select the type of floppy

disk drive installed in your

system.

Video EGA/VGA

CGA 40

CGA 80

MONO

Select the default video

device.

TForce4

TForce4TForce4

TForce4 SLI

SLISLI

SLI

Item Options Description

Halt On All Errors

No Errors

All, but Keyboard

All, but Diskette

All, but Disk/ Key

Select the situation in which

you want the BIOS to stop

the POST process and

notify you.

Base Memory N/A Displays the amount of

conventional memory

detected during boot up.

Extended Memory N/A Displays the amount of

extended memory detected

during boot up.

Total Memory N/A Displays the total memory

available in the system.

TForce4

TForce4TForce4

TForce4 SLI

SLISLI

SLI

3 Advanced BIOS Features

Figure 3. Advanced BIOS Setup

Cache Setup

These BIOS attempt to load the operating system from the device in the sequence selected in

these items. CPU Internal Cache

Depending on the CPU/chipset in use, you may be able to increase memory

access time with this option.

Enabled (default) Enable cache.

Disabled Disable cache.

Andere Handbücher für TFORCE4 SLI

Inhaltsverzeichnis

Andere Biostar Hauptplatine Handbücher

Biostar

Biostar GF7100P-M7 - BIOS SETUP Benutzerhandbuch

Biostar

Biostar G41D3+ Bedienungsanleitung

Biostar

Biostar B660GTA Bedienungsanleitung

Biostar

Biostar P4 TDP Bedienungsanleitung

Biostar

Biostar J1800NHL Bedienungsanleitung

Biostar

Biostar P4M890-M7 FE - QUICK Bedienungsanleitung

Biostar

Biostar U8798 Pro Bedienungsanleitung

Biostar

Biostar P4SDP Bedienungsanleitung

Biostar

Biostar Hi-Fi A85S3 PLUS Bedienungsanleitung

Biostar

Biostar M7VIT 800 V7.X Bedienungsanleitung

Biostar

Biostar Z270GT4 Bedienungsanleitung

Biostar

Biostar NF500 AM2G Benutzerhandbuch

Biostar

Biostar K8T890-A7 Bedienungsanleitung

Biostar

Biostar M6VZK Bedienungsanleitung

Biostar

Biostar H61MH Benutzerhandbuch

Biostar

Biostar TPOWER X58 - BIOS Benutzerhandbuch

Biostar

Biostar TA790GXBE - BIOS Bedienungsanleitung

Biostar

Biostar H310MHD3 Bedienungsanleitung

Biostar

Biostar P31B-A7 - BIOS Bedienungsanleitung

Biostar

Biostar Hi-Fi A85S2 Benutzerhandbuch

Biostar

Biostar M7VIT Bravo Benutzerhandbuch

Biostar

Biostar TZ590-BTC DUO Bedienungsanleitung

Biostar

Biostar P4 TDQ Bedienungs- und Montageanleitung

Biostar

Biostar M6VCA Bedienungsanleitung

Beliebte Hauptplatine Handbücher anderer Marken

DFI

DFI SD170 Bedienungsanleitung

ASROCK

ASROCK ROMED8-2T Bedienungsanleitung

Asus

Asus P2L97A Bedienungsanleitung

Winmate

Winmate IC70 Bedienungsanleitung

Asus

Asus MES-B Bedienungsanleitung

Grantech

Grantech SYS8F377VGGA-3OMN Bedienungsanleitung

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Bedienungsanleitung

Gigabyte

Gigabyte GA-9IVDT Bedienungsanleitung

Texas Instruments

Texas Instruments ADS8372EVM Bedienungsanleitung

Commell

Commell MS-C73 Bedienungsanleitung

IBT Technologies

IBT Technologies MB860 Bedienungsanleitung

Nvidia

Nvidia TEGRA DG-04927-001_V01 Bedienungsanleitung

Intel

Intel D33217CK Bedienungsanleitung

Asus

Asus F1A55-M LX PLUS R2.0 Bedienungsanleitung

EPC

EPC EPC9147C Bedienungsanleitung

Asus

Asus EX-B760M-V5 D4 Bedienungsanleitung

EPOX

EPOX MU-8KHA0010 Bedienungsanleitung

Ski-Doo

Ski-Doo Bombardier MPEM 219 700 090 Bedienungsanleitung