Bita-International HC60 Bedienungsanleitung

HC60 User Manual

Statement

publication may be reproduced or used in any form, or by any

electrical or mechanical means, without permission written from Bita-

International. This includes electronic or mechanical means, such as

photocopying, recording, or information storage and retrieval

systems. The material in this manual is subject to change without

notice. The software is provided strictly on an “as is” basis. All

software, including firmware, furnished to the user is on a licensed

basis. Bita-International grants to the user a non-transferable and

non-exclusive license to use each software or firmware program

delivered hereunder (licensed program). Except as noted below, such

license may not be assigned, sublicensed, or otherwise transferred

by the user without prior written consent of Bita-International. No right

to copy a licensed program in whole or in part is granted, except as

permitted under copyright law. The user shall not modify, merge, or

incorporate any form or portion of a licensed program with other

program material, create a derivative work from a licensed program,

or use a licensed program in a network without written permission

from Bita-International. Bita-International reserves the right to make

changes to any software or product to improve reliability, function, or

design.

Bita-International does not assume any product liability arising out of,

or in connection with, the application or use of any product, circuit, or

application described herein. No license is granted, either expressly

or by implication, estoppel, or otherwise under any Bita-International

intellectual property rights. An implied license only exists for

equipment, circuits, and subsystems contained in Bita-International

products.

Contents

Statement.......................................................................................... 1

Chapter 1 Brief Instruction................................................................. 4

1.1 Brief Instruction ..................................................................... 4

1.2 Precaution Before Using Battery ........................................... 5

Chapter 2 Installation Guide .............................................................. 7

2.1 Appearance ............................................................................. 7

2.2 Buttons .................................................................................... 8

2.3 Micro SD、SIM card Installation .............................................. 9

2.4 Battery Charging...................................................................... 9

2.5 Device Power on/off............................................................... 10

Chapter 3 Call Function................................................................... 11

3.1 Phone .................................................................................... 11

3.2 Contacts ................................................................................ 12

3.3 Messaging ............................................................................. 13

Chapter 4 Barcode Reader.............................................................. 14

Chapter 5 RFID Reader(optional).................................................... 15

5.1 NFC ....................................................................................... 15

Chapter 6 Other Functions .............................................................. 16

6.1 PING...................................................................................... 16

6.2 Bluetooth ............................................................................... 17

6.3 GPS....................................................................................... 18

6.4 Volume Settings..................................................................... 19

6.5 Sensor ................................................................................... 20

6.6 Keyboard ............................................................................... 21

6.7 Network ................................................................................. 22

Chapter 7 Device Specifications...................................................... 23

Chapter 1 Brief Instruction

1.1 Brief Instruction

Bita-International HC60 is our newly-developed rugged handheld

computer which exhibits extremely powerful performance, and that

too while being immensely lightweight and portable. Built with Android

10 OS and Qualcomm high-performance processor, it features a

removable large capacity battery and vigorous system configuration.

It has rich functionality features for barcode scanning, RFID, NFC,

front and rear cameras, etc., and can support 4G and WiFi. The

ergonomic narrow-edge design makes it immensely comfortable to

operate & employ for numerous projects. The device can be

implemented in a wide spectrum of industries, including logistics,

warehousing, retail, asset tracking, etc., assisting customers to

improve operation and management level significantly.

1.2 Precaution Before Using Battery

•Do not leave batteries unused for extended periods of

time, either in the product or in storage. When the battery has

been unused for 6 months, check the charge status and charge

or dispose of the battery as appropriate.

•The typical estimated life of a Lithium-Ion battery is about

two to three years or 300 to 500 charge cycles, whichever

occurs first. One charge cycle is a period of use from fully

charged, to fully discharged, and fully recharged again. Use a

two to three year life expectancy for batteries that do not run

through complete charge cycles.

•Rechargeable Lithium-Ion batteries have a limited life and

will gradually lose their capacity to hold a charge. This loss of

capacity (aging) is irreversible. As the battery loses capacity,

the length of time it will power the product (run time) decreases.

•Lithium-Ion batteries continue to slowly discharge (self-

discharge) when not in use or while in storage. Routinely check

the battery’s charge status. The user manual typically includes

information on how to check battery status, as well as battery

charging instructions.

•Observe and note the run time that a new fully-charged

battery provides for powering your product. Use the new battery

run time as a basis to compare run times for older batteries.

The run time of your battery will vary depending on the

product’s configuration and the applications that you run.

•Routinely check the battery’s charge status.

•Carefully monitor batteries that are approaching the end

of their estimated life.

•Consider replacing the battery with a new one if you note

either of the following conditions:

•The battery run time drops below about 80% of the

original run time.

•The battery charge time increases significantly.

•If a battery is stored or otherwise unused for an extended

period, be sure to follow the storage instructions in this

document. If you do not follow the instructions, and the battery

has no charge remaining when you check it, consider it to be

damaged. Do not attempt to recharge it or to use it. Replace it

with a new battery.

•Always follow the charging instructions provided with your

product. Refer to your product’s user manual and/or online help

for detailed information about charging its battery.

•Charge or discharge the battery to approximately 50% of

capacity before storage.

•Charge the battery to approximately 50% of capacity at

least once every six months.

•Remove the battery and store it separately from the

product.

•Store the battery at temperatures between 5 °C and 20 °C

(41 °F and 68 °F).

Chapter 2 Installation Guide

2.1 Appearance

The HC60 device appearance is as follows.

2.2 Buttons

Button

Function

Power Button

Press and hold to turn the device on or off.

Custom Function Button

Customize function by software

SCAN

Scan Button

Cancel Button

Num

Switch white keyboard function

Switch orange keyboard function

Direction Buttons

Move cursor and select different functions

Enter

Enter Button

2.3 Micro SD、SIM card Installation

User need to install TF card and SIM card according to the slots of

card tray as below. Then insert into slot of SIM/TF.

2.4 Battery Charging

Use the adapter to charge the battery. Don't use other brands of

charger for device.

Inhaltsverzeichnis

Andere Bita-International Handheld Handbücher

Bita-International

Bita-International HC61 Bedienungsanleitung

Beliebte Handheld Handbücher anderer Marken

Honeywell

Honeywell Dolphin 9900 Bedienungsanleitung

Honeywell

Honeywell CN75 Bedienungsanleitung

MiTAC

MiTAC Mio 168 Bedienungsanleitung

Wasp

Wasp WDT92 Bedienungsanleitung

Texas Instruments

Texas Instruments TI-Nspire Bedienungsanleitung

AXEM Technology

AXEM Technology MBS Bedienungsanleitung

Armstrong

Armstrong Brain Wave Montageanleitung

Unitech

Unitech TB128 Bedienungsanleitung

Symbol

Symbol MC9000-G Installations- und Betriebshandbuch

Unitech

Unitech HT1 1D Batch Bedienungsanleitung

Ingenico

Ingenico IWL220 GPRS Bedienungsanleitung

Intermec

Intermec CK61 Bedienungsanleitung

Symbol

Symbol c2000 Bedienungsanleitung

Symbol

Symbol MC18 Installations- und Betriebshandbuch

Acer

Acer n20 Bedienungsanleitung

Intermec

Intermec CK61 Bedienungsanleitung

Docomo

Docomo F-04H Bedienungsanleitung

Toshiba

Toshiba e350 Series Bedienungsanleitung