BitFenix Spectre ARGB SE Bedienungsanleitung
Fan header
ARGB header (3Pin 5V)
Connect fans on controller
SATA
Connect SATA cable on the controller
Press ON on remote to turn on the light
Short press to turn on the light.
Long press to switch to remote
control.
Press this key to enter the auto
play mode when it is on.
Press to turn off the light.
Accelerate the fan speed.
Slow down the fan speed.
select the mode up.
select the mode down.
Brightness +
Brightness –
Long Press to switch to motherboard
control.
Press the buttons of different colors
and the corresponding light colors
will appear.
SE Remote
Rated voltage DC12V/DC5V
With 7 of ARGB 3Pin 5V sockets, 6 of 12-volt fan
sockets.
A single ARGB sockets can bear up to 36 LEDs
Fan sockets support up to 8 of 12V DC fans
A total of 39 lighting illumination modes
The light can be controlled by the remote control
compatible with Asus AURA SYNC, MSI Mystic
Light, Gigabyte RGB Fusion 2.0, Asrock Po
loychrome SYNC and Biostar VIVID LED DJ.
ARGB header (3Pin 5V)
SATA Power Header
SE Controller
Quick Installation Guide
Operating Voltage
Starting Voltage
Max. Current
Speed
Air Flow(CFM)
Air Pressure(H²O)
Noise dB(A)
Bearing Type
Accessories
Dimensions
Fan: 12Vdc ± 5%
LED: 5Vdc ± 5%
5Vdc
0.35A
1200r.p.m±10%
42 CFM±10%
0.67 mm H²O
22 dB(A)
Rifle Bearing (RFB)
Fan Screw x 4
120 x 120 x 25mm
Spectre ARGB Fan
If you would like to change back to remote control.
Long press the ON button
on remote, the light will go back to
remote control and you can use the remote again.
BitFenix Official Website
https://www.bitfenix.com/
火鳥官方網站
https://www.bitfenix.com/?lang=zh-hant
火鳥台灣臉書粉絲專頁
https://www.facebook.com/bitfenixtw
If you would like to use Fan Kit Controller with
other BitFenix controller or any help please create
a support ticket on BitFenix Website
https://www.bitfenix.com/support/
Check More
Make sure you have motherboard with ARGB(3Pin 5V) header
Turn off
the PC and connect the ARGB header on controller
to motherboard ARGB socket
ARGB3Pin5V
Turn on
the PC and
long press
the M/B button on remote. And the light will follow motherboard control.
12
SATA
If you want to control by the software,please follow the steps.
Step 1
Step 2
Step 3
Sync devices
BASIC EFFECTS
ADAVANCED EFFECTS
AURA effects
Rainbow
Pattern
Speed
Slow Medium Fast
AURA Sync
Static Breathing Strobing
Color Cycle Rainbow Starry night
Music Smart Dark
火鸟官方微博 火鸟淘宝官方店铺
Andere Handbücher für Spectre ARGB SE
1
Andere BitFenix Computerzubehör Handbücher
