bitmore LED PULSE BM-BT5WEC Bedienungsanleitung
USER MANUAL
5W BLUETOOTH
SPEAKER
LED Pulse
IMPORTANT: READ AND RETAIN THIS MANUAL BEFORE FIRST USE!
SPECIFICATION:
Bluetooth: 5.0
Battery: Lithium-Polymer / 300mAh
Speaker output: 3W
Wireless Range: 10m
Product Size: 59 x 59 x 51mm
Material: 35% Wheat Straw + ABS
Charging Cable: USB – Micro USB charging cable
BM-BT5WEC LED PULSE | 1
LED PULSE 5W BLUETOOTH SPEAKER
LED Pulse Controls:
1. Volume Decrease (long press) /Previous track (short press)
2. Play/Pause
3. Volume Increase (long press) / Next track (short press)
4. Power Button
5. Micro SD/TF card slot
6. Micro USB Charging Port
1 2 3 4 5 6
LIGHT INDICATORS:
Red light: indicates charging and switches off when charging is complete.
Blue light:
i) Quickly flashes when Bluetooth is in pairing mode.
ii) Solid illumination when successfully connected to a Bluetooth device.
iii) Solid illumination when audio is paused.
iv) Slow flash whilst audio is playing.
CHARGING THE LED PULSE:
1. Connect the Micro USB end of the supplied cable (or use another authorised cable) to the
Micro USB port on the LED Pulse
2. Connect the USB end to a mains adaptor (not supplied)
3. Charge the LED Pulse for appox 2-3 hours (you will see a red light whilst charging) or until
the red light switches off.
CONNECTING TO BLUETOOTH:
1. Press the power button (6) to turn on the speaker
2. Ensure that your device has Bluetooth switched on
3. Search for and select “LED Pulse” -
4. You will see a quick blue flashing light whilst the LED Pulse and your device pairs.
5. Once connected, the blue light will turn solid
6. Use the buttons on the LED Pulse to control your audio experience
MICRO SD/TF CARD AUDIO:
1. Insert your Micro SD/TF card into the slot (5) with the contact surface facing downwards
– make sure to take extra care to insert it the correct way round, and do not force it. You could damage
your Micro SD/TF card or the LED Pulse.
2. Playback will automatically start.
3. Use the buttons on the LED Pulse to control your audio experience
BM-BT5WEC LED PULSE | 2
SAFETY INFORMATION:
DO NOT expose this product to heat sources (including fire or direct sunlight)
DO NOT expose this product to water or liquids.
If the LED Pulse encounters any liquid, immediately unplug the product from any connected
power sources or devices.
DO NOT disassemble or modify the LED Pulse – this could cause risk of injury, death or damage to property.
Avoid dropping the LED Pulse (or any other heavy impact which might damage the internal circuit)
Avoid cleaning this product using liquids or chemical substances (use a dry cloth only)
Only use attachments/accessories supplied by Bitmore or those certified by your device manufacturer.
This product is not a toy
Only re-charge this device using to a USB port wall adapter (not included). – please use a genuine certified
one as can be found by your device manufacturer.
DO NOT use a wall adaptor with a fast charge or high AMP output.
DO NOT re-charge via USB port on a computer
When you are not using the LED Pulse for prolonged periods of time, please charge it every 3 months to avoid
damaging the battery.
DO NOT leave the LED Pulse charging over night or unattended.
DO ensure close supervision when the LED Pulse is used near children.
DO NOT use faulty, damaged or none certified (by your device manufacturer) cables or plugs to charge or
discharge the LED Pulse or your devices.
DO NOT use a plug with more than a 5W output.
DO NOT operate the LED Pulse where aerosols are or have recently been used or where oxygen is
being administered.
DO NOT operate in a closed environment such as a pocket, handbag, backpack, under a pillow etc.
NOTE:
Failure to follow the instructions in this manual will result in the guarantee being void.
Please take extra care when insert the cable into your devices or means of charging to avoid damaging the ports.
Devices connected to this product are not covered by the Bitmore guarantee.
BM-BT5WEC LED PULSE | 3
SAFETY INFORMATION:
This device is dispatched from our factory with a 100% charge, depending on the storing temperature and the
length of storage during transit and with the retailer, the charge held by the device will naturally decrease, for best
performance we recommend charging the device fully for 3-4 hours first or
The LED Pulse is powered by a Lithium-ion battery, as with all devices using Lithium, the amount of charge the
lithium cells can hold decreases over time and with use or if left in a cold environment or unused for long periods of
time. Therefore, you may find that the amount of charge the LED Pulse holds and offers may be slightly less. This is
typically a slow process and a naturally recurring phenomenon and is not covered by the guarantee or guarantee.
Wear and tear aren’t covered by the guarantee.
BECOME A BITMORE MEMBER!
Visit bitmore.co.uk to activate your 24-month guarantee. You MUST do this within 30 days of purchase
otherwise the guarantee may be invalid. The supplied charging cable is an accessory and is not covered by the
Bitmore guarantee. Plus get a “bit more” by gaining access to exclusive product giveaways, membership rewards
and discounts!
24-MONTH LIMITED GUARANTEE
You must register your device via bitmore.co.uk within 30 days for purchase for the guarantee to be valid.
Subject to applicable law, Bitmore (owned and operated by Nuwave Channel Partners Ltd, hereinafter
“Bitmore”4), sell its products (hereinafter “Product(s)”) with the intent that they are free of defects in manufacture
and workmanship for three years from the date of original purchase, except as noted below. Bitmore warrants that
its Products will be free of defects in material and workmanship under normal use and service. This guarantee
extends only to consumers and does not extend to Retailers. Bitmore does not authorize anyone, including, but not
limited to, retailers, the subsequent consumer purchaser of the product from a retailer or remote purchasers, to
obligate Bitmore in any way beyond the terms set forth herein. This guarantee does not cover damage caused by
misuse or abuse; accident; the attachment of any unauthorized accessory; alteration to the product; improper
installation; unauthorized repairs or modifications; improper use of electrical/power supply; loss of power;
dropped Product; malfunction or damage of an operating part from failure to provide manufacturer’s
recommended maintenance; transportation damage; theft; neglect; vandalism; or environmental conditions;
loss of use; or any other conditions whatsoever that are beyond the control of Bitmore.
BM-BT5WEC LED PULSE | 3
THE GUARANTEE PROVIDED HEREIN SHALL BE THE SOLE AND EXCLUSIVE GUARANTEE.
THERE SHALL BE NO OTHER WARRANTIES EXPRESS OR IMPLIED INCLUDING ANY IMPLIED GUARANTEE
OF MERCHANTABILITY OR FITNESS OR ANY OTHER OBLIGATION ON THE PART OF THE COMPANY WITH
RESPECT TO PRODUCTS COVERED BY THIS GUARANTEE. DURACELL SHALL HAVE NO LIABILITY FOR ANY
INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES. IN NO EVENT SHALL THIS GUARANTEE REQUIRE
MORE THAN THE REPLACEMENT OF ANY PART OR PARTS WHICH ARE FOUND TO BE DEFECTIVE WITHIN
THE EFFECTIVE PERIOD OF THE GUARANTEE. REFUNDS WILL BE GIVEN IF REPLACEMENT PARTS FOR
DEFECTIVE MATERIALS ARE NOT AVAILABLE, DURACELL RESERVES THE RIGHT TO MAKE PRODUCT
SUBSTITUTIONS IN LIEU OF REPAIR OR REPLACEMENT.
This guarantee does not extend to the purchase of opened, used, repaired, repackaged and/or resealed products,
including but not limited to sale of such products on Internet auction sites and/or sales of such Products by surplus
or bulk resellers. Any and all warranties or guarantees shall immediately cease and terminate as to any Products or
parts thereof which are repaired, replaced, altered, or modified, without the prior express and written consent
of Bitmore.
This Agreement is made for the benefit of the parties and is not intended to benefit any third party or be
enforceable by any third party. The rights of the parties to terminate, rescind, or agree any amendment, waiver,
variation or settlement under or relating to this Agreement are not subject to the consent of any third party.
This guarantee provides you with specific legal rights. You may have additional rights which may vary from
country to country. Because of individual regulations, some of the above limitations and exclusions may not
apply to you.
BM-BT5WEC LED PULSE | 4
NUWAVE CHANNEL PARTNERS LTD,
PARK HOUSE, 15-19 GREENHILL CRESCENT,
WATFORD, WD18 8PH, UK
NUWAVE CHANNEL PARTNERS BV,
KAPELLERLAAN 19,
6041 JB ROERMOND , NL
-
justask@bitmore.co.uk
FOR TECHNICAL SERVICE,
PLEASE CONTACT: +44 (0)20 3026 2608
-
Inhaltsverzeichnis
Andere bitmore Sprecher Handbücher
Beliebte Sprecher Handbücher anderer Marken
Bowers & Wilkins
Bowers & Wilkins 4 Bedienungsanleitung
Sonance
Sonance SONOS OUTDOOR Series Bedienungsanleitung
Electro-Voice
Electro-Voice EVID FM4.2 Bedienungsanleitung
Pioneer
Pioneer XW-HTD630 Bedienungsanleitung
Onn
Onn BWA16AA002 Bedienungsanleitung
HP
HP GL313AA - USB Speakers PC Multimedia Bedienungsanleitung