Quick start manual for HYPERION-303 - www.bitstream.pl en
7.1 Electromagnetic compatibility
The device was designed pursuant to the standard EN 55022, EN-55024. BITSTREAM devices
are designated to functioning in closed premises.
Notice: This device is a class A device. In the residential environment may cause radio frequency
interference. In such cases, you can require the user to ta e appropriate measures.
7.2 Safety
In respect to safety of service, BITSTREAM devices were designed and tested for operation
safety along with the EN 60950 standard.
Configuration and installation of the device should be e ecuted by authorised persons familiar
with the service manual. The producer shall not be responsible for any occurrence that could result
from usage and installation that might not conform to this manual.
7.3 Data transmission
The following norms and recommendations determine the functions of data transmission and
communication interface parameters of the device.
IEEE 802.3-2002 – Ethernet interfaces with 10/100Mbps speed
IEEE 802.3u – 100Base-TX Fast Ethernet
IEEE 802.3u – 100Base-FX Fast Ethernet Fiber
IEEE 802.3ab – 1000Base-T
IEEE 802.1q, p – VLAN mechanisms definitions and signal transmission priorities for
Ethernet network
IEEE 802.3 Flow Control and Back-pressure
IEEE 802.1AB Link Layer Discovery Protocol (LLDP)
IEEE 802.1p Class of Service (CoS)
IEEE 802.1Q VLAN
IEEE 802.1ad QinQ
IEEE 802.1d - Spanning Tree Protocol
IEEE 802.1w - Rapid Spanning Tree Protocol (RSTP)
IEEE 802.1s - Multiple Spanning Tree Protocol (MSTP)
IEEE 802.3ad Link Aggregation Protocol (LACP)
IEEE 802.1 Port Based Network Access Protocol
IEEE 802.3az EEE
IEEE 802.30ah Link OAM
8 PA KING OMPLETION OF THE PRODU T
1 Ethernet Switch Eurocard HYPERION-303 1 pcs.
2 Short user manual 1 pcs.
3 Declaration of confirmity 1 pcs.
4 RS cable for configuration 1 pcs.
5 Terminal block connector 1 pcs.
