BIXOLON SPP-R200III Gebrauchsanweisung

Bluetooth Connection Manual

SPP-R200III

Mobile Printer

Rev. 1.00

http://www.bixolon.com

Rev. 1.00

- 2 -

SPP-R200III

■Table of Contents

1. Manual Information......................................................................................................3

2. Precautions ..................................................................................................................3

3. iOS MFi mode change .................................................................................................3

3-1 Set-up by printer button ............................................................................................3

3-2 iOS mode check .......................................................................................................3

4. Bluetooth Connection Instructions............................................................................4

4-1 iOS mode enable......................................................................................................4

4-2 Android mode(iOS mode disable).............................................................................6

5. Troubleshooting...........................................................................................................8

Rev. 1.00

- 3 -

SPP-R200III

1. Manual Information

This Bluetooth Connection Manual provides information on the connection of Bluetooth-

enabled iOS devices with the printer (SPP-R200III).

We at BIXOLON maintain ongoing efforts to enhance and upgrade the functions and

quality of all our products. In following, product specifications and/or user manual content

may be changed without prior notice.

2. Precautions

2-1 To connect the printer with another device via Bluetooth, the devices must be within

10m of one another. The connection is broken if the distance between devices

exceeds 10m.

2-2 The maximum separating distance may be shortened if transmission obstacles, such

as cement walls, are present.

2-3 If a device (such as a microwave oven, wireless LAN, etc.) that uses the same frequen

cy is present, transmission may be interrupted. Separate the printer and Bluetooth-

enabled device from such interrupting devices by a distance of at least 5m.

3. iOS MFi mode change

You can switch over to MFi mode which allows you to have Bluetooth connection with iOS

devices. (Note: Make sure that MFi mode must be on.)

3-1 Set-up by printer button

- Turn on the printer power.

- Push the power button and feed button for 2 seconds while paper cover is opened.

- After beep sound, close the cover.

- Reboot the printer after checking below message.

iOS mode enable!!

Please Reboot Printer!!

- Repeat above procedure to make MFi mode disable.

3-2 iOS mode check

- Implement Self Test

- If firmware version is Vxx.xx STOBa, iOS mode will be disable.

- If firmware version is Vxx.xx STOBi, iOS mode will be enable.

Rev. 1.00

- 4 -

SPP-R200III

4. Bluetooth Connection Instructions

4-1 iOS mode enable

1) Select the icon. 2) Select “Bluetooth”.

3) Select the printer to connect. 4) Enter PIN. (default : 0000)

Rev. 1.00

- 5 -

SPP-R200III

5) Select “Pair”. 6) Bluetooth communication is available.

Rev. 1.00

- 6 -

SPP-R200III

4-2 Android mode(iOS mode disable)

1) Select the icon. 2) Select “Bluetooth”.

3) Select the printer to connect. 4) Enter PIN. (default : 0000)

Rev. 1.00

- 7 -

SPP-R200III

5) Select “OK”. 6) Bluetooth communication is available.

4-2-1 NFC Auto pairing

Referring to 4-2 Android mode, paring process will be simplified by means of using NFC Auto paring

function. (Only, the device should support NFC Read/Write function.)

1) Tap your host device to NFC tag 2) Enter PIN. (default : 0000)

on a printer. (Following process is the same as 5), 6) in 4-2)

Rev. 1.00

- 8 -

SPP-R200III

5. Troubleshooting

5-1 Please follow the guide below if Bluetooth is not searched on iOS device.

1) Perform self test to check the printer is set as iOS mode.

2) Check whether printer is connected to other iOS device. Printer is not able to be

found on your iOS device if it is connected to other iOS device. If STATUS LED

blinks when you press Feed button, it means that printer is connected to other iOS

device.

You need to disconnect the connection to other iOS device, or turn on the printer

again while the paper cover is opened.

* Printer is automatically connected to last iOS device which was connected in iOS

mode. But it does not make a connection to any device, if user turns it on while the

paper cover of it is opened.

5-2 Refer to this, if you see the pop-up message as below.

1) “Failed to connect to SPP-R200III”.

2) The “Failed to connect”message might appear on a screen, since NFCAuto pairing

merely supports Bluetooth paring and does not allow device to device

communication. However, it operates properly.

Andere Handbücher für SPP-R200III

Inhaltsverzeichnis

Andere BIXOLON Drucker Handbücher

BIXOLON

BIXOLON SRP-F310 Montageanleitung

BIXOLON

BIXOLON SRP-352plusV Bedienungsanleitung

BIXOLON

BIXOLON SPP-R400 Installations- und Betriebshandbuch

BIXOLON

BIXOLON SRP-B300 Bedienungsanleitung

BIXOLON

BIXOLON SRP-275IIIA Bedienungsanleitung

BIXOLON

BIXOLON SPP-R400 Bedienungsanleitung

BIXOLON

BIXOLON SRP-E300ESK Bedienungsanleitung

BIXOLON

BIXOLON SRP-370 - Two-color Direct Thermal Printer Bedienungsanleitung

BIXOLON

BIXOLON SRP-275II Bedienungsanleitung

BIXOLON

BIXOLON BGT-102P Bedienungsanleitung

BIXOLON

BIXOLON SRP-370 - Two-color Direct Thermal Printer Bedienungsanleitung

BIXOLON

BIXOLON SPP-C200 Gebrauchsanweisung

BIXOLON

BIXOLON SPP-A200 Bedienungsanleitung

BIXOLON

BIXOLON SRP-350 PlusA Bedienungsanleitung

BIXOLON

BIXOLON SRP-350II Bedienungsanleitung

BIXOLON

BIXOLON TX Series Gebrauchsanweisung

BIXOLON

BIXOLON SRP-350II Bedienungsanleitung

BIXOLON

BIXOLON SPP-R200 Bedienungsanleitung

BIXOLON

BIXOLON SRP-380 Bedienungsanleitung

BIXOLON

BIXOLON SRP -350 Bedienungsanleitung

BIXOLON

BIXOLON SRP-350plus Installations- und Betriebshandbuch

BIXOLON

BIXOLON XM7-30 Bedienungsanleitung

BIXOLON

BIXOLON SPP-R310 Bedienungsanleitung

BIXOLON

BIXOLON SRP-E300 Gebrauchsanweisung

Beliebte Drucker Handbücher anderer Marken

Lexmark

Lexmark 1400 Series Handbuch

Canon

Canon i70 Series Bedienungsanleitung

Evolis

Evolis Elypso Bedienungsanleitung

Kyocera

Kyocera FS-9530DN Bedienungsanleitung

Canon

Canon LASER SHOT LBP-1210 Bedienungsanleitung

Samsung

Samsung BIXOLON SRP-350plusF Bedienungsanleitung

Canon

Canon PIXMA PRO-1 Series Bedienungsanleitung

Canon

Canon PIXMA G3560 Einrichtungshandbuch

Dell

Dell Color Laser Printer 2130cn Bedienungsanleitung

Tektronix

Tektronix Phaser 840 Bedienungsanleitung

Epson

Epson ET-7750 Betriebsanleitung

Canon

Canon CLBR 460ps Bedienungsanleitung

Eltron

Eltron P210 Guide Bedienungsanleitung

Ricoh

Ricoh MD-P1 Bedienungsanleitung

Epson

Epson SC-F7100 series Bedienungsanleitung

Epson

Epson Stylus C40UX Bedienungsanleitung

Canon

Canon imagePASS-A2 Bedienungsanleitung

Canon

Canon S820D Bedienungsanleitung