BIXOLON SRP-330 Bedienungsanleitung

User’s Manual

SRP-330

Thermal Printer

Rev. 1.05

http://www.bixolon.com

Rev. 1.05

- 2 -

SRP-330

■Safety Precautions

In using the present appliance, please keep the following safety regulations in order to

prevent any hazard or material damage.

WARNING

Violating following instructions can cause serious injury or death.

Do not bend the cable by force or leave it under any

heavy object.

•A damaged cable can cause a fire.

Do not plug in or unplug with your hands wet.

•You can be electrocuted.

Keep the plastic bag out of children’s reach.

•If not, a child may put the bag on his head.

Do not pull the cable to unplug.

•This can damage the cable, which is the origin of a fire or a

breakdown of the printer.

You must use only the supplied adapter.

•It is dangerous to use other adapters.

Do not plug several products in one multi-outlet.

•This can provoke over-heating and a fire.

•If the plug is wet or dirty, dry or wipe it before usage.

•If the plug does not fit perfectly with the outlet, do not plug in.

•Be sure to use only standardized multi-outlets.

PROHIBITED

ONLY SUPPLIED ADAPTER

PROHIBITED

Rev. 1.05

- 3 -

SRP-330

CAUTION

Violating following instructions can cause slight wound or damage the appliance.

Do not use the printer when it is out of order. This

can cause a fire or an electrocution.

•Switch off and unplug the printer before calling your dealer.

Do not let water or other foreign objects in the

printer.

•If this happened, switch off and unplug the printer before

calling your dealer.

Use only approved accessories and do not try to

disassemble, repair or remodel it for yourself.

•Call your dealer when you need these services.

•Do not touch the blade of auto cutter.

Install the printer on the stable surface.

•If the printer falls down, it can be broken and you can hurt

yourself.

Keep the desiccant out of children’s reach.

•If not, they may eat it.

If you observe a strange smoke, odor or noise from

the printer, unplug it before taking following

measures.

•Switch off the printer and unplug the set from the mains.

•After the disappearance of the smoke, call your dealer to

repair it.

TO UNPLUG

PROHIBITED

DISASSEMBLING

PROHIBITED

TO UNPLUG

PRINTER

DEALER

PRINTER

Rev. 1.05

- 4 -

SRP-330

■ Warning - U.S.A

This equipment has been tested and found to comply with the limits for a Class A digital

device pursuant to Part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference when the equipment is operated in a

commercial environment. This equipment generates uses, and can radiate radio frequency

energy and, if not installed and used in accordance with the instruction manual, may cause

harmful interference to radio communications. Operation of this equipment in a residential

area is likely to cause harmful interference in which case the user will be required to correct

the interference at his own expense.

■Notice - Canada

This Apparatus complies with class “A” limits for radio interference as specified in the

Canadian department of communications radio interference regulations.

Get appareil est conforme aux normes class “A” d’interference radio tel que specifier par

ministre canadien des communications dans les reglements d’interference radio.

■Caution

Some semiconductor devices are easily damaged by static electricity. You should turn the

printer “OFF”, before you connect or remove the cables on the rear side, in order to guard

the printer against the static electricity. If the printer is damaged by the static electricity, you

should turn the printer “OFF”.

■ Waste Electrical and Electric Equipment (WEEE)

This marking shown on the product or its literature, indicates that is should not be

disposed with other household wastes at the end of its working life, To prevent

possible harm to the environment or human health from uncontrolled waste

disposal, please separate this from other types of wastes and recycle it

responsibly to promote the sustainable reuse of material resources. Household

users should contact either the retailer where they purchased this product, or their

local government office, for details of where and how they can take this item for

environmentally safe recycling. Business users should contact their supplier and check the

terms and conditions of the purchase contract. This product should not be mixed with other

commercial wastes for disposal.

■Rating Label Symbol Information

DC (Direct current)

Rev. 1.05

- 5 -

SRP-330

■Introduction

The SRP-330 Roll Printer is designed for use with electronic instruments such as system

ECR, POS, banking equipment, computer peripheral equipment, etc.

The main features of the printer are as follows:

1. High speed printing : 47.28 (1/6” Feed) lines per second.

2. Low noise thermal printing.

3. USB Port & RS-232(SRP-330COS/330COSDU), USB Port & Parallel(SRP-330COP),

USB Port & Ethernet(SRP-330COE)

4. The data buffer allows the unit to receive print data even during printing.

5. Peripheral units drive circuit enables control of external devices such as cash drawer.

6. Characters can be scaled up to 64 times compared to its original size.

7. Bar code printing is possible by using a bar code command.

8. Different print densities can be selected by DIP switches.

Please be sure to read the instruction in this manual carefully before using your new

SRP-330.

※NOTE

The socket-outlet shall be near the equipment and it shall be easy accessible.

※All specifications are subjected to change without notice.

This equipment is indoor use and all the communication hiring are limited to inside of the

building.

We at BIXOLON maintain ongoing efforts to enhance and upgrade the functions and quality

of all our products. In following, product specifications and/or user manual content may be

changed without prior notice.

Rev. 1.05

- 6 -

SRP-330

■Table of Contents

1. Setting Up the Printer..................................................................................................7

1-1 Unpacking ................................................................................................................7

1-2 Connecting the Cables.............................................................................................8

1-2-1 Serial Cable (RS-232C)................................................................................8

1-2-2 Parallel Cable (IEEE1284) .........................................................................12

1-2-3 USB Cable .................................................................................................13

1-2-4 Ethernet Cable ...........................................................................................13

1-3 Drawer Cable .........................................................................................................14

1-4 Setting the Dip Switches.........................................................................................15

1-4-1 Serial Interface...........................................................................................15

1-4-2 Parallel / Ethernet Interface........................................................................15

1-5 Installing or Replacing the Paper Roll ....................................................................16

1-6 Recommended Papers...........................................................................................18

1-7 Using the Printer.....................................................................................................18

1-7-1 Control Panel .............................................................................................18

1-7-2 Mounting 2” Partition ..................................................................................18

1-8 Connecting the computer .......................................................................................19

1-9 Connecting the Power Supply................................................................................19

2. Self Test .....................................................................................................................20

3. Hexadecimal Dumping..............................................................................................21

4. Specification..............................................................................................................22

5. Appendix....................................................................................................................23

5-1 Cleaning Printer......................................................................................................23

Rev. 1.05

- 7 -

SRP-330

1. Setting Up the Printer

1-1 Unpacking

Your printer box should include these items. If any items are damaged or missing, please

contact your dealer for assistance.

SRP-330 Cover Cable CD

Roll Paper Manual AC Adapter

Power Cord USB A-B Cable 2” Partition

Rev. 1.05

- 8 -

SRP-330

1-2 Connecting the Cables

Connect the cable that is suitable for the specifications of the printer and the host computer

(POS/ECR) to the printer and the host computer. The specification of the drawer should

match the printer specifications.

※NOTE

Before connecting any of the cables, make sure that both the printer and the host are turned

off.

1-2-1 Serial Cable (RS-232C)

1-2-1-1 Single Serial Interface

1 (S.G)

3 (TXD)

2 (RXD)

7 (RTS)

8 (CTS)

6 (DSR)

4 (DTR)

(S.G)

PRINTER

SIDE(25P)

HOST

SIDE(9P)

(S.G) 1

(TXD) 2

(RXD) 3

(DSR) 6

(DTR) 20

(S.G) 7

1 (S.G)

2 (TXD)

3 (RXD)

4 (RTS)

5 (CTS)

6 (DSR)

20 (DTR)

7 (S.G)

PRINTER

SIDE(25P)

HOST

SIDE(25P)

(S.G) 1

(TXD) 2

(RXD) 3

(DSR) 6

(DTR) 20

(S.G) 7

Drawer kick-out

connector

Rev. 1.05

- 9 -

SRP-330

No.

Signal

Name

Signal

Direction

Function

BODY

Frame

GND

Frame Ground

TXD

Output

Transmit Data

RXD

Input

Receive Data

DSR

Input

This signal indicates whether the host computer can

receive data. (H/W flow control)

1) MARK(Logic1) : The host can receive a data.

2) SPACE(Logic0) : The host can not receive a data.

3) The printer transmits a data to the host, after

confirming this signal.

4) When XON/XOFF flow control is selected, the

printer does not check this signal.

Signal GND

Signal Ground

DTR

Output

This signal indicates whether the printer is busy. (H/W

flow control)

1) MARK(Logic1) : The printer is busy.

2) SPACE(Logic0) : The printer is not busy.

3) The host transmits a data to the printer, after

confirming this signal.

4) When XON/XOFF flow control is selected, the host

does not check this signal.

Shield

Frame

GND

Frame Ground

1-2-1-2 Dual Serial Interface

(TXD) 2

(RXD) 3

(RTS) 8

(CTS) 7

(DSR) 4

(DTR) 6

(S.G) 5

HOST

SIDE(9P)

PRINTER

SIDE(9P)

3(RXD)

2(TXD)

8(CTS)

7 (RTS)

4(DTR)

6(DSR)

5(S.G)

Rev. 1.05

- 10 -

SRP-330

Number

Signal

Name

Signal

Direction

Function

TXD

Output

Transmit data

RXD

Input

Receive data

DTR

Output

This signal indicates whether the host computer can

receive the data. (Hardware flow control)

1) MARK (Logic 1): Host computer can receive the data.

2) SPACE (Logic 2): Host computer cannot receive the

data.

3) Printer checks the signal and sends the data when

ready.

4) Printer does not check this signal if XON/XOFF flow

control is selected.

Signal

GND

Signal ground

DSR

Input

This signal indicates whether the printer is in operation.

(hardware flow control)

1) MARK (Logic 1): Printer is in operation.

2) SPACE (Logic 2): Printer is not in operation.

3) Printer checks the signal from the host and transmits

the data when ready.

4) Printer does not check this signal if XON/XOFF flow

control is selected.

RTS

Output

This signal indicates whether the host computer can

receive the data. (Hardware flow control)

1) MARK (Logic 1): Host computer can receive the data.

2) SPACE (Logic 2): Host computer cannot receive the

data.

3) Printer checks the signal and sends the data when

ready.

4) Printer does not check this signal if XON/XOFF flow

control is selected.

CTS

Input

This signal indicates whether the printer is in operation.

(Hardware flow control)

1) MARK (Logic 1): Printer is in operation.

2) SPACE (Logic 2): Printer is not in operation.

3) Printer checks the signal from the host and transmits

the data when ready.

4) Printer does not check this signal if XON/XOFF flow

control is selected.

Andere Handbücher für SRP-330

Inhaltsverzeichnis

Andere BIXOLON Drucker Handbücher

BIXOLON

BIXOLON SPP-R200 Gebrauchsanweisung

BIXOLON

BIXOLON SRP-370 - Two-color Direct Thermal Printer Bedienungsanleitung

BIXOLON

BIXOLON SRP-350plusA Bedienungsanleitung

BIXOLON

BIXOLON SPP-C200 Montageanleitung

BIXOLON

BIXOLON SRP-Q300II Montageanleitung

BIXOLON

BIXOLON SLP-DL410 Bedienungsanleitung

BIXOLON

BIXOLON SRP-350II Installations- und Betriebshandbuch

BIXOLON

BIXOLON SRP-500 Montageanleitung

BIXOLON

BIXOLON SRP-E300ESK Bedienungsanleitung

BIXOLON

BIXOLON XT5-40N Series Bedienungsanleitung

BIXOLON

BIXOLON SRP-350plusIIA Bedienungsanleitung

BIXOLON

BIXOLON STP-131 Montageanleitung

BIXOLON

BIXOLON SRP-350II Bedienungsanleitung

BIXOLON

BIXOLON SRP-350 PlusA Bedienungsanleitung

BIXOLON

BIXOLON SRP-350PG - SRP 350 B/W Direct Thermal... Bedienungsanleitung

BIXOLON

BIXOLON SPP-R300 Installations- und Betriebshandbuch

BIXOLON

BIXOLON SPP-103II Bedienungsanleitung

BIXOLON

BIXOLON SRP-350 PlusA Bedienungsanleitung

BIXOLON

BIXOLON SRP-S320 Bedienungsanleitung

BIXOLON

BIXOLON SRP-350plusIII SRP-352plusIII Bedienungsanleitung

BIXOLON

BIXOLON SRP-340 Bedienungsanleitung

BIXOLON

BIXOLON SRP-350plusV Bedienungsanleitung

BIXOLON

BIXOLON SRP-275 Bedienungsanleitung

BIXOLON

BIXOLON SRP-350plusIII SRP-352plusIII Versionshinweis

Beliebte Drucker Handbücher anderer Marken

Lexmark

Lexmark 1400 Series Handbuch

Canon

Canon i70 Series Bedienungsanleitung

Evolis

Evolis Elypso Bedienungsanleitung

Kyocera

Kyocera FS-9530DN Bedienungsanleitung

Canon

Canon LASER SHOT LBP-1210 Bedienungsanleitung

Samsung

Samsung BIXOLON SRP-350plusF Bedienungsanleitung

Canon

Canon PIXMA PRO-1 Series Bedienungsanleitung

Canon

Canon PIXMA G3560 Einrichtungshandbuch

Dell

Dell Color Laser Printer 2130cn Bedienungsanleitung

Tektronix

Tektronix Phaser 840 Bedienungsanleitung

Epson

Epson ET-7750 Betriebsanleitung

Canon

Canon CLBR 460ps Bedienungsanleitung

Eltron

Eltron P210 Guide Bedienungsanleitung

Ricoh

Ricoh MD-P1 Bedienungsanleitung

Epson

Epson SC-F7100 series Bedienungsanleitung

Epson

Epson Stylus C40UX Bedienungsanleitung

Canon

Canon imagePASS-A2 Bedienungsanleitung

Canon

Canon S820D Bedienungsanleitung