Black & Decker KC9006 Bedienungsanleitung

KC9006

ENGLISH

CORDLESS SCREWDRIVER

KC9006

CONGRATULATIONS!

You have chosen a Black & Decker

tool. Our aim is to provide quality

tools at an affordable price.

We hope that you will enjoy

using this tool for many years.

EC DECLARATION OF

CONFORMITY

KC9006

Black & Decker declares

that these products conform

to: 98/37/EC, 89/336/EEC,

EN 50260

Level of sound pressure,

measured according to EN 50260:

KC9006

(sound pressure) dB(A) $1

(acoustic power) dB(A) $2

Always wear ear protection

if the sound pressure

exceeds 85 dB(A).

Hand/arm weighted vibration

value according to EN 50260:

KC9006

< 2.5 m/s

Colin Wills

Director of Engineering

BDCI, 4/F, 2 Dai Wang Street

Tai Po Industrial Estate

Tai Po NT, Hong Kong

INTENDED USE

Your Black & Decker screwdriver

KC9006 has been designed for

inserting and removing screws

and nuts using the appropriate

accessories.

This tool is intended for

consumer use only.

SAFETY INSTRUCTIONS

Warning symbols

The following symbols are used

in this manual:

Denotes risk of personal

injury, loss of life or damage

to the tool in case of non-

observance of the

instructions in this manual.

Denotes risk of electric

shock.

Read the manual prior to

operation.

Know your tool

◆Warning! When using

battery-powered tools,

basic safety precautions,

including the following,

should always be followed

to reduce the risk of fire,

leaking batteries, personal

injury and material damage.

◆Read all of this manual

carefully before operating

the tool.

◆Before operating the tool,

make sure that you know

how to switch the tool off

in an emergency.

◆Retain this manual for

future reference.

ENGLISH

General

1. Keep work area clean

Cluttered areas and benches

can cause accidents.

2. Consider work area

environment

Do not expose the tool to rain.

Do not use the tool in damp

or wet conditions. Keep the

work area well lit. Do not use

the tool where there is a risk of

causing fire or explosion, e.g.

in the presence of flammable

lixWidsandgases.

3. Keep children away

Do not allow children, visitors

or animals to come near the

work area or to touch the tool.

4. Dress properly

Do not wear loose clothing or

jewellery, as these can be

caught in moving parts.

Preferably wear rubber gloves

and non-slip footwear when

working outdoors. Wear

protective hair covering to

keep long hair out of the way.

5. Personal protection

Always use safety glasses.

Use a face or dust mask

whenever the operations may

produce dust or flying

particles. Wear ear protection

whenever the sound level

seems uncomfortable.

6. Do not overreach

Keep proper footing and

balance at all times.

7. Stay alert

Watch what you are doing.

Use common sense. Do not

operate the tool when you

are tired.

8. Secure workpiece

Use clamps or a vice to hold

the workpiece. It is safer and

it frees both hands to operate

the tool.

9. Use appropriate tool

The intended use is described

in this instruction manual.

Do not force small tools or

attachments to do the job of

a heavy-duty tool. The tool

will do the job better and

safer at the rate for which it

was intended. Do not force

the tool.

Warning! The use of any

accessory or attachment or

performance of any operation

with this tool other than those

recommended in this

instruction manual may present

a risk of personal injury.

10.Check for damaged parts

Before use, carefully check

the tool for damage. Check

for misalignment and seizure

of moving parts, breakage of

parts, damage to guards and

switches and any other

conditions that may affect its

operation. Ensure that the

tool will operate properly and

perform its intended function.

Do not use the tool if any part

is damaged or defective.

Do not use the tool if the

switch does not turn it on and

off. Have any damaged or

defective parts repaired or

replaced by an authorised

repair agent. Never attempt

any repairs yourself.

11.Avoid unintentional starting

Do not carry the tool with a

finger on the on/off switch.

12.Store idle tools

When not in use, tools and

batteries should be stored in

a dry, locked up or high

place, out of reach of

children.

13.Maintain tools with care

Keep cutting tools sharp and

clean for better and safer

performance. Follow the

instructions for maintenance

and changing accessories.

Keep handles and switches

dry, clean and free from oil

and grease.

ENGLISH

14.Repairs

This tool complies with

relevant safety requirements.

Repairs should only be carried

out by qualified persons using

original spare parts; otherwise

this may result in considerable

danger to the user.

Additional safety instructions

for non-rechargeable batteries

◆Never attempt to open for

any reason.

◆Do not store in locations

where the temperature may

exceed 40 °C.

◆When disposing of batteries,

follow the instructions given

in the section “Protecting the

environment”. Do not

incinerate the batteries.

◆Under extreme conditions,

battery leakage may occur.

When you notice liquid on the

batteries, proceed as follows:

- Carefully wipe the liquid off

using a cloth. Avoid skin

contact.

PACKAGE CONTENTS

The pack contains:

1 Cordless screwdriver

1 Double-ended screwdriver bit

4 AA batteries

1 Instruction manual

◆Carefully unpack all parts.

OVERVIEW (fig. A)

1. On/off switch (forward)

2. On/off switch (reverse)

3. Spindle lock collar

4. Bit holder

5. Battery holder

ASSEMBLY

Before assembly, engage

the spindle lock as

described below.

Fitting and removing a

screwdriver bit (fig. B)

◆To fit a screwdriver bit (6),

push it into the bit holder

until it locates.

◆To remove a screwdriver bit,

pull it straight from the bit

holder.

Fitting and removing batteries

(fig. C)

This tool uses 4 alkaline batteries

(size AA).

For optimum performance, we

recommend only to use

batteries from a known brand.

Fitting

◆Keeping the tabs (7)

depressed, pull the battery

holder out of the tool.

◆Insert the batteries into the

battery holder, orientating

the plus terminal (+) of each

battery as shown on the

battery holder.

◆Insert the battery holder into

the tool and push until it

clicks into place.

Removing

◆Keeping the tabs (7)

depressed, pull the battery

holder out of the tool.

◆Take the batteries from the

battery holder.

USE

Let the tool work at its own

pace. Do not overload.

Manual spindle lock (fig. D)

The manual spindle lock allows

you to use the tool as a regular

manual screwdriver. You can give

an extra twist to firmly tighten a

screw or to loosen a very tight

screw.

◆To activate the spindle lock,

turn the collar (3) to the

symbol.

ENGLISH

◆To release the spindle lock,

turn the collar (3) to the

symbol.

Operating the tool (fig. E)

◆Make sure that the spindle

lock is released.

◆To tighten a screw or nut, keep

the on/off switch (1) depressed.

◆To loosen a screw or nut, keep

the on/off switch (2) depressed.

◆To switch the tool off, release

the on/off switch.

Hints for optimum use

◆Always use the correct type

and size of screwdriver bit.

◆If screws are difficult to

tighten, try applying a small

amount of washing liquid or

soap as a lubricant.

◆Use the spindle lock to loosen

very tight screws or to firmly

tighten screws.

◆Always hold the tool and

screwdriver bit in a straight

line with the screw.

◆When screwing in wood, it is

recommended to drill a pilot

hole with a depth equal to the

length of the screw. A pilot

hole guides the screw and

prevents splintering or

distortion of the wood. For

the optimum size of the pilot

hole, refer to the table below.

◆When screwing in hardwood,

also drill a clearance hole with

a depth equal to half the

length of the screw. For the

optimum size of the clearance

hole, refer to the table below.

Screw size Pilot hole ø

(softwood)

No. 6 (3.5 mm) 2 mm

No. 8 (4 mm) 3.2 mm

No. 10 (5 mm) 3.5 mm

Screw size Pilot hole ø

(hardwood)

No. 6 (3.5 mm) 2.5 mm

No. 8 (4 mm) 3.5 mm

No. 10 (5 mm) 4.0 mm

Screw size Clearance

hole

No. 6 (3.5 mm) 4 mm

No. 8 (4 mm) 5.0 mm

No. 10 (5 mm) 5.7 mm

MAINTENANCE

Your Black & Decker tool has

been designed to operate over a

long period of time with a

minimum of maintenance.

Continuous satisfactory operation

depends upon proper tool care

and regular cleaning.

◆Regularly clean the motor

housing using a damp cloth.

Do not use any abrasive or

solvent-based cleaner.

PROTECTING THE

ENVIRONMENT

Tools

Should you find one day

that your tool needs

replacement, or if it is of no

further use to you, think of

the protection of the

environment. Black & Decker

repair agents will accept old

Black & Decker tools and

ensure that they are

disposed of in an

environmentally safe way.

Batteries

If you want to dispose of the

tool yourself, the batteries

must be removed as

described above and

disposed of in accordance

with local regulations.

ENGLISH

◆Place the batteries in a

suitable packaging to ensure

that the terminals cannot be

short-circuited. Take the

batteries to a local recycling

station.

Technical data

KC9006

Voltage V

4 x 1.5

Battery type AA-size,

alkaline

No-load speed min

-1

Max. torque Nm $

Bit holder 6.35 mm

hex

Weight kg $

GUARANTEE

(UK, SOUTH AFRICA, AUSTRALIA

AND NEW ZEALAND ONLY)

Should your Black & Decker

product become defective due to

faulty materials or workmanship,

within 24 months from the date

of purchase, we guarantee to

either replace all defective parts

or -at our discretion- to replace

the unit free of charge, provided

that:

◆The product is returned to us

or one of our authorised

repair agents with proof of

purchase.

◆The product has not been

used for trade, professional or

hire purposes.

◆The product has not been

subjected to misuse or

neglect.

◆The product has not

sustained any damage

through foreign objects,

substances or accidents.

◆Repairs have not been

attempted by anyone other

than our service staff or

authorised repair agents.

This guarantee is offered as an

extra benefit and does not affect

your statutory rights.

AFTER SALES SERVICE (UK,

SOUTH AFRICA, AUSTRALIA

AND NEW ZEALAND ONLY)

Black & Decker offers a

nationwide network of authorised

repair agents. The use of other

than genuine Black & Decker

parts and accessories may reduce

the performance of the tool and

cause personal injury and

material damage. The terms and

conditions of the warranty could

also be rendered void.

OUR AFTER SALES SERVICE

POLICY (UK, AUSTRALIA AND

NEW ZEALAND ONLY)

Full details on our after-sales

service are available on the

Internet at www.2helpU.com.

Alternatively, contact our Service

and Information Centre at the

address towards the back of this

manual.

It is our aim that all Black & Decker

customers should be totally

satisfied with their Black & Decker

product and our after sales

service. If any help or advice is

needed, please contact your local

Black & Decker repair agent.

If your product needs repair,

please take or send it to an

authorised repair agent,

providing proof of purchase if

claiming a guarantee repair.

The batteries supplied with this

tool are not covered by the

guarantee.

Australia D

WALT Industrial Power Tool Company Tel. 03 9895 9200

7 Clarice Road, Box Hill, Victoria 3128 Fax 03 9899 7465

New Zealand Black & Decker Tel. 09 579 7600

81 Hugo Johnson Drive Fax 09 579 8200

Penrose, Auckland, New Zealand

South Africa Black & Decker South Africa (Pty) Ltd Tel. (011) 653-1400

Physical address: Fax (011) 653-1499

146 Lechwe Street, Corporate park

Randjiesfontein, Midrand

Postal address:

Postnet Suite 107, Private Bag X65

Halfway House 1685

United Kingdom Black & Decker Tel. 01753 511234

210 Bath Road Fax 01753 551155

Slough, Berkshire SL1 3YD Helpline 01753 574277

????-??

Andere Handbücher für KC9006

Inhaltsverzeichnis

Andere Black & Decker Akkuschrauber Handbücher

Black & Decker

Black & Decker cp14ln Bedienungsanleitung

Black & Decker

Black & Decker VP800 Bedienungsanleitung

Black & Decker

Black & Decker BDCS36W Bedienungsanleitung

Black & Decker

Black & Decker Platinum LDX120P Bedienungsanleitung

Black & Decker

Black & Decker Scrugun 2020-10 Bedienungsanleitung

Black & Decker

Black & Decker BDSG500 Linea PRO Bedienungsanleitung

Black & Decker

Black & Decker Pivot Driver PP360 Bedienungsanleitung

Black & Decker

Black & Decker DP240 Bedienungsanleitung

Black & Decker

Black & Decker HPD1802 Bedienungsanleitung

Black & Decker

Black & Decker BDCD8C Bedienungsanleitung

Black & Decker

Black & Decker screwdriver Bedienungsanleitung

Black & Decker

Black & Decker CD121K Bedienungsanleitung

Black & Decker

Black & Decker KC9006 Bedienungsanleitung

Black & Decker

Black & Decker BDCS36F Bedienungsanleitung

Black & Decker

Black & Decker BDCDD12 Bedienungsanleitung

Black & Decker

Black & Decker LD120VA Bedienungsanleitung

Black & Decker

Black & Decker BDCS36G Bedienungsanleitung

Black & Decker

Black & Decker LI2000 Bedienungsanleitung

Black & Decker

Black & Decker KC36LN Bedienungsanleitung

Black & Decker

Black & Decker ASL146 Bedienungsanleitung

Black & Decker

Black & Decker BDCS50C Bedienungsanleitung

Black & Decker

Black & Decker Scrugun 2035-740-2 Bedienungsanleitung

Black & Decker

Black & Decker BDCDD220C-CA Bedienungsanleitung

Black & Decker

Black & Decker KC4815 Bedienungsanleitung

Beliebte Akkuschrauber Handbücher anderer Marken

Makita

Makita DFT085F Bedienungsanleitung

Parkside

Parkside 345138 2004 Bedienungsanleitung

Makita

Makita DFL650F Bedienungsanleitung

AEG

AEG BST 18BLX2-0 Bedienungsanleitung

Ingersoll-Rand

Ingersoll-Rand D5000 Series Bedienungsanleitung

BGS technic

BGS technic 956 Bedienungsanleitung

Hilti

Hilti SD 6000 Bedienungsanleitung

Parkside

Parkside PEPS 3 A1 Bedienungsanleitung

Festool

Festool TI 15 Bedienungsanleitung

Makita

Makita DWT190 Bedienungsanleitung

Matatakitoyo Torque Tools

Matatakitoyo Torque Tools MTD Bedienungsanleitung

Skil

Skil 2346 Montageanleitung

DeWalt

DeWalt XR LI-ION DCD931 Bedienungsanleitung

Festool

Festool DWC 18-2500 Bedienungsanleitung

EINHELL

EINHELL TE-CD 12/1 Li Series Bedienungsanleitung

Makita

Makita BFT043F Bedienungsanleitung

Stanley

Stanley SCD2 Bedienungsanleitung

Atlas Copco

Atlas Copco LUM12 SR Merkblatt