Black & Decker BFSR18 Bedienungsanleitung

INSTRUCTION MANUAL

18"STAND FAN

Thank you for choosing BLACK+DECKER!

PLEASE READ BEFORE RETURNING THIS PRODUCT FOR

ANY REASON.

If you have a question or experience a problem with your BLACK+DECKER

purchase, go to www.blackanddecker.com/instantanswers

If you can’t find the answer or do not have access to the Internet, call

844-299-0879 from 10:30 a.m. to 6:30 p.m. EST Mon. - Fri. to speak with an

agent. Please have the catalog number available when you call.

SAVE THIS MANUAL FOR FUTURE REFERENCE.

CATALOG NUMBER

BFSR18

Page 2

Thank you for purchasing our

BLACK+DECKER product. This

easy-to-use manual will guide you

in getting the best use of your fan.

Remember to record the model and

serial numbers. They are on a label

on the rear.

Staple your receipt to your manual.

You will need it to obtain warranty service.

Model number

Serial number

Date of purchase

PRODUCT REGISTRATION

CONTENTS

SAFETY INFORMATION

Important Safety Instructions......................................................................................................................................... 4-6

Electrical Requirements....................................................................................................................................................... 5

SET UP & USE

Parts & Features........................................................................................................................................................................ 7

Operation & Use ..................................................................................................................................................8-11

Replacing the Fuse................................................................................................................................................12

CLEANING & CARE...............................................................................................................................................12

TROUBLE SHOOTING & WARRANTY

Before You Call For Service ...............................................................................................................................13

Customer Service...................................................................................................................................................13

Troubleshooting......................................................................................................................................................13

Limited Warranty ................................................................................................................................................................... 14

Page 3

Page 4

SAFETY INFORMATION

IMPORTANT SAFETY INSTRUCTIONS

1. READ ALL INSTRUCTIONS BEFORE USE

2. Never insert ﬁngers, pencils, or any other object through the grill

when fan is running

3. Disconnect fan when moving from one location to another.

4. Disconnect fan when not in use and before cleaning.

5. To protect against risk of electrical shock, do not immerse fan in

water or any other liquid.

6. Do not let cord hang over edge of table or counter.

7. Be sure fan is on a stable surface when operating to avoid

overturning.

8. Do not use fan in window. Rain may create electrical hazard.

9. Close supervision is necessary when any appliance is used by or near

children.

10. This product employs overload protection (fuse). A blown fuse

indicates an overload or short-circuit situation. If the fuse blows,

unplug the product from the outlet. Replace the fuse as per the user

manual (follow product marking for proper fuse rating) and check

the product. If the replacement fuse blows, a short-circuit may be

present and the product should be discarded or returned to an

authorized service facility for examination and/or repair.

11. Do not operate any fan with a damaged cord or plug. Discard fan or

return to an authorized service facility for examination and/or repair.

12. Do not run cord under carpeting. Do not cover cord with throw rugs,

runners, or similar coverings. Do not route cord under furniture or

appliances. Arrange cord away from trac area and where it will not

be tripped over.

WARNING

WARNING - Hazards or unsafe

practices which COULD result in

severe personal injury or death

DANGER

DANGER - Immediate hazards

which WILL result in severe

personal injury or death

CAUTION

CAUTION - Hazards or unsafe

practices which COULD result in

minor personal injury

WARNING

When using electrical appliances, basic safety precautions

should be followed, including the following

Page 5

SAFETY INFORMATION

13. To reduce the risk of ﬁre or electric shock, DO NOT use this fan with

any solid state speed control devices.

14. Do not use outdoors.

15. Ensure that the fan is switched o from the supply mains before

removing the grille.

SAVE THESE INSTRUCTIONS

HOUSEHOLD USE ONLY

ELECTRICAL REQUIREMENTS

This appliance has a polarized plug (one blade is wider than the other). To reduce the

risk of electric shock, this plug is intended to ﬁt into a polarized outlet only one way.

If the plug does not ﬁt into the outlet, reverse the plug. If it still does not ﬁt, contact a

qualiﬁed electrician. Do not attempt to modify the plug in any way.

POWER SUPPLY CORD

1. If the power supply cord is too short, do not use an extension cord. Have a qualiﬁed

electrician or serviceman to install an outlet near the appliance.

2. If it is absolutely necessary to use longer cord sets or an extension cord, extreme

care must be exercised.

a) The marked electrical rating of the cord set or extension cord must equal to or

be greater than the electrical rating of the appliance. The longer cord should be

arranged so that it will not drape over the counter top or table top where it can be

pulled on by children or tripped over unintentionally.

NOTE: Neither BLACK+DECKER nor the dealer can accept any liability for damage

to the product or personal injury resulting from failure to observe the

electrical connection procedures.

Page 6

SAFETY INFORMATION

HANDLING ALKALINE BATTERIES

1. Should ﬂuid from the battery accidentally get into your eyes, there is a threat

of loss of eyesight, do not rub them. Immediately rinse your eyes with clean tap

water and then consult a physician immediately.

2. Do not put the battery in a ﬁre, expose it to heat, dismantle or modify it. If the

insulation or safety valve is damaged, the battery may leak ﬂuid, overheat or

explode.

3. Do not insert the battery with the poles reversed. Doing so may cause some

abnormality or a short and the battery may leak ﬂuid, overheat or explode.

4. Keep the battery out of the reach of children. If the battery is swallowed, contact a

physician immediately.

5. If the alkali ﬂuid gets in your mouth, rinse your mouth with water and contact a

physician immediately.

6. If the alkali ﬂuid gets on your skin or clothes, it may burn your skin, thoroughly

rinse the aected area with tap water.

7. Do not mix new and old batteries or other makes of batteries. The dierent

attributes may cause the battery to leak ﬂuid, overheat or explode.

8. This battery was not made to be recharged. Recharging this battery may damage

the insulation or internal structure and may cause the battery to leak ﬂuid,

overheat or explode.

9. Do not damage or remove the label on the exterior of the battery. Doing so may

cause the battery to short, leak ﬂuid, overheat or explode.

10. Do not drop, throw or expose the battery to extreme impact. Doing so may cause

the battery to leak ﬂuid, overheat or explode.

11. Do not alter the shape of the battery. If the insulation or safety valve is damaged,

the battery may leak ﬂuid, overheat or explode.

12. Immediately remove batteries when they have lost all power. Leaving the batteries

in the unit for a long time may cause the batteries to leak ﬂuid, overheat or

explode due to gas that is generated by the batteries.

Contact your local government for disposal practices in your area.

WARNING

When handling alkaline batteries, basic safety precautions

should be followed, including the following

Page 7

PARTS & FEATURES

SET UP & USE

Base

7-shape Bolt

Blade

Front grill PlasticnutMotorshaft

Clutchknob

Motorhousing

Rear grill

Case

Thumb

screw

Internal

pole

Touch

switch

Tighten

Spinner

Loosen

Fasten

Height

adjustment

ring

Extension

pole

Remote

Control

Holder

Page 8

SET UP & USE

ASSEMBLY OF BASE & COLUMN UNIT

1. Unscrew the 7-shape Bolt from the Extension Pole. (see Fig. 1)

2. Insert the extension pole in the base and tighten the 7-shape Bolt. (see Fig. 2)

3. From the extension pole, loosen the height adjustment ring and adjust the

internal pipe to the desired height.

NOTE: If you can’t ﬁnd the internal pole, it has slid inside the extension pole. You

will need to retrieve it by pulling it out from the extension pole ( see Fig. 3).

4. To attach the upper portion of the fan to the extension pole, loosen the thumb

screw slightly on the bottom of the head unit. Place the head unit on the extension

pole and tighten the thumb screw in alignment with the groove on the internal

pole. (see Fig. 4).

CAUTION: Height adjustment ring must be fully fastened before the assembly of

the motor housing to the extension pole.

Fig. 1 Fig. 2

Fig. 3 Fig. 4

Loosen

Mounting Hole

Thumb Screw

Annular Groove

Page 9

GRILL & FAN BLADE ASSEMBLY

WARNING: Never attempt to run the fan without the grill in place and properly

secured. Failure to have the grill in place can result in serious injury.

1. Unscrew the spinner clockwise and the plastic nut counterclockwise to remove

both of them. Fix the rear grill so it sits perfectly ﬂush to the motor then tighten the

plastic nut clockwise. (see Fig. 5)

2. Insert the blade into shaft, and make sure the rotor shaft pin is ﬁtted into groove of

the blade. Turn the spinner counterclockwise to tighten the blade. (see Fig. 6)

3. Fasten the front grill and the rear grill to each other by using the grill clips.

(see Fig. 7)

Spinner

Tight

Loose

Plastic Nut

Spinner Tight

Blade Retaining

Slot

Clip

Fig. 5 Fig. 6 Fig. 7

SET UP & USE

REMOTE CONTROL BATTERY INSTALLATION

1. Press down on the battery compartment cover and slide it out.

2. Insert 2 “AAA” batteries (not included) making sure that the positive terminals are

facing the proper way.

3. Replace the cover.

NOTE: Use size “AAA” alkaline batteries. Do not use rechargeable batteries.

Remote Control

Battery Battery Cover

Fig. 10

SET UP & USE

OPERATION INSTRUCTIONS

REMOTE CONTROL (Fig. 8)

Point the remote control at the receptor on body of the fan and press the desired

button. The remote control will work at distances of up to roughly ﬁve meters

(16 feet) and an angle of 30 degrees left and right of the control panel.

1. ON/OFF KEY - The key is for switching the fan on and o. Press and the fan will

be started at low speed. Press again, it will be switched o.

2. TIMER KEY - When this key is touched, the auto shutto timer can be set to

either 1, 2 or 4 hours and the corresponding light will turn on. If the light doesn’t

come on after touching the key, the fan will run continuously.

3. SPEED KEY - After the fan has started, this key serves as a speed selector in

the sequence order “LOW-MEDIUM-HIGH-LOW, etc” when this key is pushed

repeatedly or held down.

4. WIND MODE KEY - Press this key to change from normal to natural wind mode.

It will go in sequence order NORMAL--NATURAL--NORMAL etc. The LED speed

indicator will ﬂash when in NATURAL wind mode.

NOTE: NORMAL wind mode represents constant air ﬂow while in NATURAL wind

mode, intensity will vary to simulate typical outdoor wind conditions. Wind

mode function can be activated from remote control only.

Page 10

4h HI

2h MED

1h LOW

ON/SPEED

OFF

TIMER

Fig. 8

Speed Power

Timer

Wind Mode

Inhaltsverzeichnis

Beliebte Standventilator Handbücher anderer Marken

TriStar

TriStar VE-5951 Bedienungsanleitung