Black & Decker GEH183 Bedienungsanleitung

GEH183

www.blackanddecker.com

Bahasa indonesia

English (original instructions)

ENGLISH

Your Black & Decker multi-purpose tool has been

designed for a wide range of DIY applications.

Using the shear/trimmer head (GEH183), this tool

is intended for trimming grass, hedges, shrubs and

brambles.

This tool is intended for consumer use only.

@Read all safety warnings

and all instructions. Failure to follow

the warnings and instructions listed

and/or serious injury.

@Read all safety warnings

and all instructions provide with your

power tool (EVO143, EVO181, EVO183,

EAC800, EAD800) before using this

follow the warnings

and instructions

or serious injury.

The term “power tool” in the warnings

refers to your mains operated (corded) power tool

or battery operated (cordless) power tool.

@Additional safety warnings

for hedge trimmers



A moment of inat-

tention while operating the hedge trimmer may

result in serious personal injury.

min-1

2,300 2,800

cm 10 10

mm 23 23

cm 15 15

mm 8 8

mm <1 <1

kg 1.57 1.68

accessory. Failure to

GEH183

Technical Data

SHEAR/ TRIMMER HEAD

EVO143

(14.4V)

EVO181/183

(Max)

2,800

1.68

2,800

1.68

EAC800-KR EAD800-TW

Speciﬁcations:



Proper handling

of the hedge trimmer will reduce possible

personal injury from the cutter blades.



Cutter blades contact-

ing a “live” wire may make exposed metal

parts of the power tool “live” and could give the

operator an electric shock.

ENGLISH

During

operation the cable may be hidden in shrubs

and can be accidentally cut by the blade.

The intended use is described in this instruc-

tion manual. The use of any accessory or

attachment or performance of any operation

with this tool other than those recommended

in this instruction manual may present a risk of

personal injury and/or damage to property.

Always check the hedge/work area for foreign

objects before starting.

If you have not used a hedge trimmer before,

preferably seek practical instruction by an

experienced user in addition to studying this

manual.

Never touch the blades while the tool is run-

ning.

Never attempt to force the blades to come to a

standstill.

Do not put the tool down until the blades have

come to a complete standstill.

Regularly check the blades for damage and

wear. Do not use the tool when the blades are

damaged.

Take care to avoid hard objects (e.g. metal

wire, railings) when trimming. Should you

accidentally hit any such object, immediately

switch the tool off and check for any damage.

Should the tool start to vibrate abnormally,

immediately switch it off and check for any

damage.

If the tool stalls, immediately switch it off.

After use, place the blade sheath supplied over

the blades. Store the tool, making sure that the

blade is not exposed.



when using the tool. Never attempt to use an

incomplete tool or a tool with unauthorised

Never allow children to use the tool.

Be aware of falling debris when cutting the

higher slides of a hedge.

@Additional safety warnings

for shears

Never allow people unfamiliar with these in-

structions or children to use the machine. Local

regulations can restrict the age of the operator.

Keep in mind that the operator or user is

responsible for accidents or hazards occurring

to other people or their property.

Never operate the machine while people, espe-

cially children, or pets are nearby.

Use the machine only in daylight or good

ENGLISH

Take care against injury to feet and hands from

the cutting means. Only switch on the motor

only when the hands and feet are away from

the cutting means.

Always ensure that the ventilation openings are

kept clear of debris.

Use only the manufacturer’s recommended

replacement parts and accessories.

Inspect and maintain the machine regularly.

Have the machine repaired only by an author-

ised repairer.

@Contact with, or inhalation

of dusts arising from cutting applica-

tions may endanger the health of the

operator and possible bystanders.

designed for protection against dust

and fumes and ensure that persons

within or entering the work area are

also protected.

The following pictograms are shown on the tool:

:To reduce the risk of

injury, the user must read the

instruction manual.

RDo not expose the tool to rain or high

humidity.

Beware of sharp blades. Blades

continue to move after the motor is

switched off.

bystanders away.

Directive 2000/14/EC guaranteed

sound power.

ENGLISH

Tool shown is EVO183. Other tools are available

for use with this tool head.

This tool includes some or all of the following

features.

10. Garden Shear/Hedge trimmer head

11. Grass shear blade

12. Hedge trimm blade

13. Blade release button

14. Blade cover

15. Lock off button

16. Grass shear blade cover

17. Hedge trimm blade cover

Before attempting any of the following

operations, remove the battery from the tool and

make sure that the saw blade has stopped. Used

saw blades may be hot.

The shear blade (11) has been designed for trim-

ming grass and weeds. The trim blade (12) has

been designed for trimming hedges and shrubs.

Hold the tool away from the body

Push and hold the blade release button (13) in

Slide the blade cover (14) backward and lift off

Lower the blade onto the pins (B3).

The retaining magnet (18) will keep the

blade secured to garden shear/hedge trimmer

head.

Replace the blade cover (14) and slide it

Alignment of the blade with the drive pin

and alignment of the back of the blade and the

blade cover.

Ensure the forward reverse slider (2) is not

in the locked position.

To switch the tool on, pull the lock off button

(15) then press the variable speed switch (1).

The tool should always be run at full speed.

Release the lock off button.

To switch the tool off, release the variable

speed switch.

Inhaltsverzeichnis

Andere Black & Decker Trimmer Handbücher

Black & Decker

Black & Decker PN 249512 Bedienungsanleitung

Black & Decker

Black & Decker MTE550 Bedienungsanleitung

Black & Decker

Black & Decker GL4525 Bedienungsanleitung

Black & Decker

Black & Decker LHT2436 Bedienungsanleitung

Black & Decker

Black & Decker HT500 Bedienungsanleitung

Black & Decker

Black & Decker GTC610 Bedienungsanleitung

Black & Decker

Black & Decker 8231 2-speed Bedienungsanleitung

Black & Decker

Black & Decker GL7033 Bedienungsanleitung

Black & Decker

Black & Decker HH2455 Bedienungsanleitung

Black & Decker

Black & Decker STC1820EPCB Bedienungsanleitung

Black & Decker

Black & Decker NST1118 Bedienungsanleitung

Black & Decker

Black & Decker STB3620L Bedienungsanleitung

Black & Decker

Black & Decker STC1840E Bedienungsanleitung

Black & Decker

Black & Decker NST1118 Bedienungsanleitung

Black & Decker

Black & Decker GL550 Bedienungsanleitung

Black & Decker

Black & Decker Powerful solutions GL602 Bedienungsanleitung

Black & Decker

Black & Decker BEHT100 Bedienungsanleitung

Black & Decker

Black & Decker ST7100-CA Bedienungsanleitung

Black & Decker

Black & Decker GPC1820L Bedienungsanleitung

Black & Decker

Black & Decker LHT120 Bedienungsanleitung

Black & Decker

Black & Decker GLC1825N Bedienungsanleitung

Black & Decker

Black & Decker GL420 Bedienungsanleitung

Black & Decker

Black & Decker GL650 Bedienungsanleitung

Black & Decker

Black & Decker BEHTS551 Bedienungsanleitung

Beliebte Trimmer Handbücher anderer Marken

MTD

MTD HT 51 E Bedienungsanleitung

McCulloch

McCulloch T22 LS Bedienungsanleitung

COCKRAFT

COCKRAFT PRO HL36-S Bedienungsanleitung

Grizzly

Grizzly CT 1800 Li Bedienungsanleitung

Peco

Peco Z Trimmer ZT-3000 Bedienungsanleitung

Solo

Solo 116 Bedienungsanleitung

Stiga

Stiga ST 1200 Bedienungsanleitung

Echo

Echo GT-225 - 10-09 Bedienungsanleitung

RedMax

RedMax BT17 Bedienungsanleitung

GreenWorks

GreenWorks STA806 Bedienungsanleitung

Parkside

Parkside PHSL 900 A3 Bedienungsanleitung

Gardeo

Gardeo PRO GPTHT2560 Bedienungsanleitung

Park

Park DT-810870 Bedienungsanleitung

Worx

Worx WG209 Bedienungsanleitung

Gardenline

Gardenline 43671/HTKS26 Bedienungsanleitung

Makita

Makita 3710 Bedienungsanleitung

Champion

Champion 100683 Bedienungsanleitung

Stihl

Stihl FS 311 Bedienungsanleitung