Black Box EFN06-24 Bedienungsanleitung

1000 Park Drive • Lawrence, PA 15055-1018 • 724-746-5500 • Fax 724-746-0746

CUSTOMER

SUPPORT

INFORMATION

Order toll-free in the U.S. 24 hours, 7 A.M. Monday to midnight Friday: 877-877-BBOX

FREE technical support, 24 hours a day, 7 days a week: Call 724-746-5500 or fax 724-746-0746

Mail order: Black Box Corporation, 1000 Park Drive, Lawrence, PA 15055-1018

Web site: www.blackbox.com • E-mail: [email protected]

APRIL 2000

EFN06-24

EFN06-36

EFN12-24

EFN12-36

6-Fiber Buffer Tube Fanout Kit

12-Fiber Buffer Tube Fanout Kit

CONTENTS

Contents

1. Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

2. Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

2.1 Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

2.2 Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

2.3 What the Package Includes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

2.4 What You Need to Supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

3. Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

3.1 Preparing the Cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

3.2 Preparing the Buffer Tube . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

3.3 Threading the Fibers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

3.4 Marking the Buffer Tube Fanout . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

3.5 Fiber Termination . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

3.6 Installing the Buffer Tube Fanout into Hardware. . . . . . . . . . . . . . . 16

TRADEMARKS USED IN THIS MANUAL

Any trademarks mentioned in this manual are acknowledged to be the

property of the trademark owners.

6- OR 12-BUFFER TUBE FANOUT KIT

1. Specifications

Buffer Tube Diameter—6-Fiber Buffer Tube Fanout: 2.4-mm buffer tubes;

12-Fiber Buffer Tube Fanout: 3.0-mm buffer tubes

Protective Tube Diameter—900 µm

Temperature—32 to 158°F (0 to 70°C)

CHAPTER 2: Introduction

2. Introduction

2.1 Description

Because individual fiber optic cable strands have an extremely small diameter, to

terminate the cable you must first enclose each strand in protective tubing. Once

the cable is enclosed, you can then add fiber optic connectors, such as SC, to each

enclosed cable.

The Buffer Tube Fanout Kits are specifically designed to terminate 6- and 12-

fiber buffer tubes. Perfect for users who want to field-install connectors, the kits

provide a compact, easy-to-install fanout solution. No additional hardware or space

other than that required for terminating tight-buffered cables is required. With

these kits, you don’t even need epoxy!

The Kits feature a 900-µm fanout assembly that is color-coded to match the fiber

color scheme. The fanout assembly is available with 6- or 12-fiber units in lengths

of 25 or 36 inches (63.5 or 91.4 cm). These different lengths give you the flexibility

you need for a variety of hardware options.

You can install the 6-Fiber Buffer Tube Fanout on 2.4-mm buffer tubes or the

12-Fiber Buffer Tube Fanout on 3.0-mm buffer tubes for indoor applications. The

Buffer Tube Fanouts branch the fibers from a buffer tube into individual fibers

protected by 900-µm PVDF protective tubing. You can then install connectors on

the fiber according to your hardware interface requirements.

One Buffer Tube Fanout is required for each 6- or 12-Fiber Buffer Tube. Please

read the installation instructions in Chapter 3 before assembling the Buffer Tube

Fanout.

6- OR 12-BUFFER TUBE FANOUT KIT

2.2 Precautions

WARNING

Wear safety gloves to protect your hands from chemicals and accidental

injury when handling sharp-bladed tools.

Wear safety glasses to protect your eyes from accidental injury when

handling chemicals and cutting fiber. Pieces of glass fiber are very

sharp and can damage the cornea of the eye.

CHEMICAL PRECAUTIONS: Contains hydrocarbons. If ingested, DO

NOT INDUCE VOMITING. Call a physician immediately. KEEP OUT OF

THE REACH OF CHILDREN.

CAUTION

Fiber optic cable is sensitive to excessive pulling, bending, and

crushing forces. Consult the cable specification sheet for the cable you

are installing. Do not bend cable or buffer tubes more sharply than their

minimum recommended bend radius. Do not apply more pulling force to

the cable than specified. Do not crush the cable or buffer tubes or allow

them to kink. Doing so may cause damage that can alter the

transmission characteristics of the cable—the cable may have to be

replaced.

2.3 What the Package Includes

Check to make sure your package includes the following items (refer to

Figure 2-1). If anything is missing or damaged, please contact Black Box at

724-746-5500.

Buffer Tube Fanout top

Buffer Tube Fanout bottom

6-ft. (1.8-m)or 12-ft. (3.6-m) 900-µm color-coded assembly, 25 in. (63.5 cm)

or 36 in. (91.4 cm) long

➂

➁

①

CHAPTER 2: Introduction

Figure 2-1. Package Contents.

2.4 What You Need to Supply

You’ll need the following items:

• Electrical tape

• Lint-free tissues

• Clean rags

• Permanent marker

• Wire markers

• Buffer tube stripper

• Buffer tube clamps

• d’Gel cable cleaner (liquid or wipes)

• Pliers

①

➁

➂

6- OR 12-BUFFER TUBE FANOUT KIT

3. Installation

3.1 Preparing the Cable

CAUTION

Read the cable manufacturer’s sheath-removal instructions. Some

cable-stripping procedures may call for a slightly longer length at the

end of the cable to allow for cable core (buffer tube) damage caused

when accessing rip cords, etc. Be sure to add such length (typically 6 to

10 inches) to the strip length in Step 2, below.

You can assemble a Buffer Tube Fanout any time after you’ve removed the cable

sheath and cleaned the buffer tubes.

Installation factors such as the length of cable slack available, the location of

terminating hardware, and the question of storing buffer tube slack as opposed to

cable slack, can dictate when and where you choose to mount the cable end and

assemble the Buffer Tube Fanout.

Figures 3-1 and 3-2 illustrate two typical installation options.

Option 1 (Refer to Figure 3-1)

1. Prepare the cable end.

2. Route the cable end to a work surface.

3. Assemble the Buffer Tube Fanout.

4. Mount the cable on the hardware, and route the Buffer Tube Fanout and

tubes inside the hardware.

5. Install the Buffer Tube Fanout in the hardware.

CHAPTER 3: Installation

Figure 3-1. Option 1.

Option 2

1. Prepare the cable end.

2. Mount the cable on the hardware.

3. Route the buffer tubes to a work surface.

4. Assemble the Buffer Tube Fanout.

5. Route Buffer Tube Fanout and tubes inside the hardware.

6. Install the Buffer Tube Fanout in the hardware.

Figure 3-2. Option 2.

Buffer Tube Fanout

taped to work surface

Rack

Buffer Tube Fanout

taped to work surface

Buffer

tubes

Cable mounting point

Permanent routing

Temporary cable routing

to work surface

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Black Box Kabel und Steckverbinder Handbücher

Black Box

Black Box AVSP-DVI1X2 Bedienungsanleitung

Black Box

Black Box Multi Quick Check RJ-11 Bedienungsanleitung

Black Box

Black Box EXN37215 Bedienungsanleitung

Black Box

Black Box VSP-HDMI2-1X4 Bedienungsanleitung

Black Box

Black Box Terminated Multimode Fiber Optic Cable Bedienungsanleitung

Black Box

Black Box AC650A-2 Bedienungsanleitung

Black Box

Black Box AC3010A Bedienungsanleitung

Black Box

Black Box VSP-HDMI1X2-4K Bedienungsanleitung

Black Box

Black Box TL421A Bedienungsanleitung

Black Box

Black Box 25522 Bedienungsanleitung

Black Box

Black Box MT243A Bedienungsanleitung

Black Box

Black Box CAT5 Shielded Twisted Pair (STP) Patch Cable Bedienungsanleitung

Black Box

Black Box IC149A-R4 Bedienungsanleitung

Black Box

Black Box AC043A-R2 Bedienungsanleitung

Black Box

Black Box DRD-4 Bedienungsanleitung

Black Box

Black Box Terminated Multimode Fiber Optic Cable Bedienungsanleitung

Black Box

Black Box FA012 Bedienungsanleitung

Black Box

Black Box V.11 LS Bedienungsanleitung

Black Box

Black Box PHONE COUPLER II Bedienungsanleitung

Black Box

Black Box IEEE 802.3 Bedienungsanleitung

Black Box

Black Box CAT3 Bedienungsanleitung

Black Box

Black Box GigaTrue CAT6 JPM610A-R8 Bedienungsanleitung

Black Box

Black Box MC140A Bedienungsanleitung

Black Box

Black Box AC074A-R3 Bedienungsanleitung

Beliebte Kabel und Steckverbinder Handbücher anderer Marken

Philips

Philips SWA6310 Bedienungsanleitung

StarTech.com

StarTech.com CRJ4550PK Bedienungsanleitung

Nohau

Nohau EMUL-IP2K-PC Bedienungsanleitung

Foxun

Foxun SX-SP144E-HD4K2K Bedienungsanleitung

Philips

Philips SWA3305W Bedienungsanleitung

opticis

opticis Stretch DVIM1-1P0x Bedienungsanleitung

Volkswagen

Volkswagen VAS 6558A Bedienungsanleitung

NEXIBO

NEXIBO N-13 Bedienungsanleitung

CYP

CYP PU-1H3HBTL Bedienungsanleitung

Allen-Bradley

Allen-Bradley 1784-u2dhp Bedienungsanleitung

Global Caché

Global Caché Flex Link Blaster Bedienungsanleitung

Hauppauge

Hauppauge USB-Live2 Bedienungsanleitung

Fenix

Fenix MPSV 15 Bedienungsanleitung

BEGA

BEGA 71 085 Bedienungsanleitung

Tesla

Tesla HPWC Bedienungsanleitung

GAMERON

GAMERON LUXURY TV CABLE Bedienungsanleitung

molex

molex Milli-Grid Dual row 87568 Series Bedienungsanleitung

Burndy

Burndy Continental Industries thermOweld CRE-7 Bedienungsanleitung