Black Box LBPS310A-KIT Bedienungsanleitung

Order toll-free in the U.S.: Call 877-877-BBOX (outside U.S.

call 724-746-5500) • FREE technical support 24 hours a day,

7 days a week: Call 724-746-5500 or fax 724-746-0746

• Mailing address: Black Box Corporation, 1000 Park Drive,

Lawrence, PA 15055-1018 • Web site: www.blackbox.com

• E-mail: info@blackbox.com

Customer

Support

Information

BL A C K B O X®

Hardened PoL PoE Ethernet Extenders

Extends Power over Ethernet up to 1.2 km over ordinary

voice-grade copper wire.

Features Ethernet extension up to 2.2 km.

Hardened PoL PoE Ethernet Extenders

LBPS310A-KIT

LBPS311A

LBPS312A

10/100Base-TX Hardened PoL/PoE Ethernet Extender

User’s

Manual

Quick Start Guide

This quick start guide describes how to install and use the Hardened

Ethernet Extender. This is the Hardened Ethernet Extender of choice for

harsh environments constrained by space.

Installation

Transmitter: This is a PoL (Power over Link) transmitter. Data and power can be

delivered at the same time through one pair copper wire to turn on and communicate with

a Receiver via an RJ-11 phone jack or a 2-pin Terminal Block interface.

Receiver: This is a PoL (Power over Link) Receiver. The Receiver can be powered either

by a Transmitter through one pair copper wire or power supply. The Ethernet port

supports IEEE802.3at PoE/PSE for fulfilling PoE/PD application.

∞Remove the device power before installation.

∞Remove the device power before any I/O and DIP switch configuration.

∞Do not connect the Transmitter and the Receiver to the same power source.

Power loops back through the PoL linked via copper wire may damage devices.

PoL (Power over Link) Mode Enable Installation

∞Ensure all power sources are disconnected from Transmitter and Receiver.

∞Ensure that the Transmitter PoL (Power over Link) DIP switch is in On position (Up

position).

∞Set the Transmitter Type DIP switch to Per (Performance, Up position) for better Line

Speed (but poor noise immunity). Or set the Transmitter’s Type DIP switch to Std

(Standard, Down position) for standard Line Speed (but better noise immunity).

∞Check if Receiver Mode is set to Rmt on DIP switch (Remote, Up position).

∞Connect one end of the one pair copper wire to RJ-11 phone jack or 2-pin Terminal

Block interface of the Transmitter and the other end to RJ-11 phone jack or 2-pin

Terminal Block interface of the Receiver.

∞Connect a power source to Transmitter.

∞Data and power can be delivered from Transmitter, and at the same time through

one pair of copper wire to turn on and communicate with Receiver.

<Note> The equipment is designed for building installation and not intended to be

connected to exposed (outside plant) networks, including campus environment or

equivalent.

PoL (Power over Link) Mode Disable Installation

∞For longer distance (e.g. over 1.4km) extension applications, the Receiver may not

be able to receive power from the Transmitter. A separate power supply may be

used on the Receiver.

∞Ensure all power sources are disconnected from the Transmitter and the Receiver.

∞Ensure that the Transmitter PoL (Power over Link) DIP switch is in Off position

(Down position).

∞Set the Transmitter Type DIP switch to Per (Performance, Up position) for better Line

Speed (but poor noise immunity). Or set the Type DIP switch of Transmitter to Std

(Standard, Down position) for standard Line Speed (but better noise immunity).

∞Connect the power source to Transmitter.

∞Check if the Receiver Mode is set to Rmt on DIP switch (Remote, Up position).

∞Connect the power source to the Receiver.

10/100Base-TX Hardened PoL/PoE Ethernet Extender

User’s

Manual

∞Connect one end of the one pair copper wire to the RJ-11 phone jack or 2-pin

Terminal Block interface of the Transmitter and connect the other end to RJ-11

phone jack or 2-pin Terminal Block interface of the Receiver.

∞Data can be transmitted between the Transmitter and the Receiver via copper wire.

Physical Description

The Port Status LEDs and Power Inputs

Transmitter Receiver

∞DC Terminal Block Power Inputs: 2.5A @ 48VDC (Peak current 3.26A). Two pairs of

power inputs can be used to power up this Ethernet Extender. The redundant power

supplies function is supported. You only need to have one power input connected to

run the Ethernet Extender.

∞DC JACK Power input: 2.5A @ 48VDC (Peak current 3.26A).

10/100Base-TX Hardened PoL/PoE Ethernet Extender

User’s

Manual

Power Input Assignment

Power1 48VDC DC Jack

T:46-57V / R:46-57V DC

Power2 Power Ground

T:46-57V / R:46-57V DC

Power3 Power Ground

Earth Ground

Terminal

Block

DIP Switch Down Up

Transmitter

PoL Disable Power over Link Enable Power over Link

Type Std (Standard)

Standard line speed

Better noise immunity

Per (Performance)

Better line speed

Poor noise immunity

Receiver

Mode Loc (Local)

Set Receiver to Local Mode Rmt (Remote)

Set Receiver to Remote Mode

Type Std (Standard)

Standard line speed

Better noise immunity

Per (Performance)

Better line speed

Poor noise immunity

LEDs State Indication

Steady Power receivedPower

1/2/3 Off Power off

Steady Power Ethernet extension interface function is enabled

PoL Off No power is transmitted over Ethernet extension

interface

Steady Powered device (PD) is connected

PoE Off Powered device (PD) is disconnected

Steady A valid Extender connection is established

Fast

Flashing Data is being transmitted or received

Slow

Flashing Extender port under negotiation mode

Link

Off Extender interface connection is not established

Line

Speed Steady Displays the link speed in Mbps

Steady PoE power can be transmitted for PDPSE

Output All off No PoE power can be transmitted for PD

Steady A valid Ethernet connection established

Flashing Data transmitted or received

Green Off Non-Ethernet connection is established

Steady Link speed at 100Mbps

Yellow Off Link speed at 10Mbps

10/100Base-TX Hardened PoL/PoE Ethernet Extender

User’s

Manual

Power over Link (PoL) Enabled

Distance Data Rate Receiver PoE Output

300M 100Mbps 30.0W

400M 90Mbps 15.4W

600M 60Mbps 14.0W

800M 45Mbps 9.5W

1000M 35Mbps 7.0W

1200M 20Mbps 5.0W

Power over Link (PoL) Disabled

Power Supply Applied on Receiver

Distance Data Rate Receiver PoE Output

1400M 15Mbps 30.0W

1600M 10Mbps 30.0W

1800M 3Mbps 30.0W

Up to 2200M 1Mbps 30.0W

<Note> The Reference Performance is tested on 24AWG Telephone wire (0.5mm

diameter, 1-pair wire, Cable impedance: 100ohm).

10/100Base-TX and Ethernet Extender Connectors

10/100Base-TX Connection

The following table lists the pinouts

of the 10/100Base-TX RJ-45 port.

Regular Port PoE Port

1 Output Transmit Data +

Output Transmit Data +

2 Output Transmit Data - Output Transmit Data -

3 Input Receive Data + Input Receive Data +

4 Positive (VCC+)

5 Positive (VCC+)

6 Input Receive Data - Input Receive Data -

7 Negative (VCC-)

8 Negative (VCC-)

10/100Base-TX Hardened PoL/PoE Ethernet Extender

User’s Manual 5

Ethernet Extender Connection

The RJ-11 and Terminal Block port pinouts:

Pin 3: Tip, Pin 4: Ring.

Use a telephone line to connect two

RJ-11 or Terminal Block ports between

two Hardened Ethernet Extenders.

Functional Description

∞Meets EN61000-6-2 & EN61000-6-4 EMC Generic Standard Immunity

for industrial environment.

∞Ethernet port: Supports IEEE802.3/802.3u/802.3x. Auto-negotiation:

10/100Mbps, full/half-duplex; Auto MDI/MDIX.

∞Auto data rate negotiation for the Ethernet extension interface.

∞Supports six speeds with speed indicator LEDs on the front panel of the

unit, up to 100Mbps @ about 300 meters (984 ft.), down to 1Mbps @

about 2,200 meters (7,218 ft.).

∞Supports Power over Ethernet applications up to 1,200meters (3,937ft.)

for Max. 5 watts power consumed PoE powered devices.

∞Power consumption:

- Enable Power over Link (PoL) function: Max. 65 Watts

- Disable Power over Link (PoL) function: Transmitter: Max. 5 W.

Receiver: Max. 35 W with PoE output, Max. 5 W without PoE

output.

∞Power Supply: Redundant T:46-57V / R:46-57V DC Terminal Block

power inputs and 48 VDC Latched DC JACK interface.

∞Operating temperature range @ -40 to 75 (-40to 167). Tested

for functional operation @ -40 to 85 (-40to 185).

∞Supports Din-Rail or Panel Mounting installation.

10/100Base-TX Hardened PoL/PoE Ethernet Extender

User’s

Manual

Preface

This manual describes how to install and use the Hardened Ethernet

Extender. The Hardened Ethernet Extender introduced here provides one

channel for Ethernet over existing voice grade copper wire.

The Hardened Ethernet Extender fully complies with IEEE802.3 10Base-T

and IEEE802.3u 100Base-TX standards.

In this manual, you will find:

∞Product overview

∞Features on the Hardened Ethernet Extender

∞Illustrative LED functions

∞Installation instructions

∞Specifications

10/100Base-TX Hardened PoL/PoE Ethernet Extender

User’s Manual 7

Table of Contents

Quick Start Guide............................................................................. 1

Installation........................................................................................ 1

Physical Description........................................................................ 2

The Port Status LEDs and Power Inputs ..................................... 2

10/100Base-TX and Ethernet Extender Connectors................... 4

Functional Description.................................................................... 5

Preface ................................................................................................ 6

Table of Contents.............................................................................. 7

Introduction....................................................................................... 8

Product Overview ............................................................................ 8

Product Features ............................................................................. 8

Packing List...................................................................................... 9

One-Channel Hardened Ethernet Extender............................... 10

Ports................................................................................................ 10

Ethernet Extender Mode Settings.................................................. 10

DIP Switch...................................................................................... 10

Front Panel & LEDs...................................................................... 11

LED Indicators ............................................................................ 11

10/100Base-TX and Ethernet Extender Connectors................. 12

Installation ....................................................................................... 13

Selecting a Site for the Equipment................................................ 13

DIN Rail Mounting ........................................................................ 13

Connecting to Power ..................................................................... 15

Redundant DC Terminal Block Power Inputs........................... 15

48VDC DC Jack.......................................................................... 15

Specifications ................................................................................... 17

10/100Base-TX Hardened PoL/PoE Ethernet Extender

User’s Manual 8

Introduction

The Hardened Ethernet Extender provides one channel for Ethernet over

existing voice grade copper wire. This Hardened Ethernet Extender solution

works in industrial applications or rugged environments.

Product Overview

Transmitter Receiver

Product Features

∞Meets EN61000-6-2 & EN61000-6-4 EMC Generic Standard Immunity

for industrial environment.

∞Ethernet port: Supports IEEE802.3/802.3u/802.3x. Auto-negotiation:

10/100Mbps, full/half-duplex; Auto MDI/MDIX.

∞Auto data rate negotiation for Ethernet extension interface.

∞Support six speeds with speed indicator LEDs on front panel of unit, up

to 100Mbps @ about 300 meters (984 ft.), down to 1Mbps @ about

2,200 meters (7,218 ft.).

10/100Base-TX Hardened PoL/PoE Ethernet Extender

User’s

Manual

∞Supports Power over Ethernet applications up to 1,200 meters (3,937ft.)

for Max. 5 watts of power consumed by PoE powered devices.

∞Power consumption:

- Enable Power over Link (PoL) function: Max. 65Watts

- Disable Power over Link (PoL) function: Transmitter: Max. 5W.

Receiver: Max. 35W with PoE output, Max. 5W without PoE output.

∞Power Supply: Redundant T:46-57V / R:46-57V DC Terminal Block

power inputs and 48 VDC Latched DC JACK interface.

∞Operating temperature range @ -40 to 75 (-40to 167). Tested

for functional operation @ -40 to 85 (-40to 185).

∞Supports Din-Rail or Panel Mounting installation.

Packing List

Your package should contain the following items. IIf anything is missing or

damaged, contact Black Box Technical Support at 724-746-5500 or

info@blackbox.com.

∞

The Hardened Ethernet Extender

∞

User’s Manual

∞

AC to DC Power Adapter and Power Cable (optional)

Andere Handbücher für LBPS310A-KIT

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Black Box Extender Handbücher

Black Box

Black Box VX-HDMI-FO Bedienungsanleitung

Black Box

Black Box ACX2MT Series Bedienungsanleitung

Black Box

Black Box MDR3243A Bedienungsanleitung

Black Box

Black Box LB300A-R3 Montage- und Bedienungsanleitung

Black Box

Black Box ACS4001A series Technisches Datenblatt

Black Box

Black Box SerSwitch ACS260A-U-MM Bedienungsanleitung

Black Box

Black Box VX-HDMI-POE-MTX Bedienungsanleitung

Black Box

Black Box ACU1007A Bedienungsanleitung

Black Box

Black Box ServSwitch ACU4001A Bedienungsanleitung

Black Box

Black Box LBNC300A Bedienungsanleitung

Black Box

Black Box ACS335A-AS Bedienungsanleitung

Black Box

Black Box ACS2028A Bedienungsanleitung

Black Box

Black Box ServSwitch Wizard ACU5012A Bedienungsanleitung

Black Box

Black Box LB320A Bedienungsanleitung

Black Box

Black Box LB522A-KIT Bedienungsanleitung

Black Box

Black Box LBT01A-KIT Bedienungsanleitung

Black Box

Black Box AC555A-R2 Bedienungsanleitung

Black Box

Black Box ServSwitch ACU1001A Bedienungsanleitung

Black Box

Black Box ACX1MT Series Bedienungsanleitung

Black Box

Black Box VX1000 Series Bedienungsanleitung

Black Box

Black Box AC1000A-R3 Bedienungsanleitung

Black Box

Black Box LB304A Bedienungsanleitung

Black Box

Black Box ServSwitch ACU5013A Bedienungsanleitung

Black Box

Black Box ServSwitch ACU4001A Bedienungsanleitung

Beliebte Extender Handbücher anderer Marken

SY HDBT-60T Bedienungsanleitung

Appsys ProAudio

Appsys ProAudio ADX-16 Bedienungsanleitung

Atlona

Atlona RS232 Bedienungsanleitung

IDK

IDK OPF-TH1000-A Bedienungsanleitung

Enable-IT

Enable-IT 824WP Bedienungsanleitung

Worx

Worx Landroid RadioLink WA0864 Technisches Datenblatt

TP-Link

TP-Link TL-WA730RE Bedienungsanleitung

Camplex

Camplex CMX-HDMI-SFPL Bedienungsanleitung

SC&T

SC&T HE03-4K Bedienungsanleitung

Samsung

Samsung SCS-26UC4 Bedienungsanleitung

Foxun

Foxun SX-GES24 Bedienungsanleitung

MuxLab

MuxLab 500771 Bedienungsanleitung

foxunhd

foxunhd SX-AEX01 Bedienungsanleitung

TERK Technologies

TERK Technologies LFIRX2 Bedienungsanleitung

Devolo

Devolo Audio Extender Handbuch

Edimax

Edimax EW-7438RPn V2 Bedienungsanleitung

Shinybow USA

Shinybow USA SB-6335T5 Bedienungsanleitung

SECO-LARM

SECO-LARM ENFORCER EVT-PB1-V1TGQ Bedienungsanleitung