Black Box LWE100A Bedienungsanleitung

BL A C K B OX®

Extend Ethernet links between buildings wirelessly

and with ease.

Provides affordable point-to-point wireless Ethernet extension up to 6.2 miles

(10 km).

Wireless P-T-P Ethernet Extender Quick Start Guide

Order toll-free in the U.S.: Call 877-877-BBOX (outside U.S. call 724-746-5500)

FREE technical support 24 hours a day, 7 days a week: Call 724-746-5500 or fax 724-746-0746

Mailing address: Black Box Corporation, 1000 Park Drive, Lawrence, PA 15055-1018

Web site: www.blackbox.com • E-mail: info@blackbox.com

Customer

Support

Information

LWE100A LWE100A-W1

LWE100A-KIT LWE100A-W3

LWE100AE LWE100A-W1-KIT

LWE100AE-KIT LWE100A-W3-KIT

LWE100AU LWE100AU-KIT

724-746-5500 | blackbox.com

Page 2

Trademarks Used in this Manual

We‘re here to help! If you have any questions about your application

or our products, contact Black Box Tech Support at 724-746-5500

or go to blackbox.com and click on “Talk to Black Box.”

You’ll be live with one of our technical experts in less than 30 seconds.

Trademarks Used in this Manual

Black Box and the Double Diamond logo are registered trademarks of BB Technologies, Inc.

Any other trademarks mentioned in this manual are acknowledged to be the property of the trademark owners.

About the Quick Installation Guide

This Quick Installation Guide enables a professional installer to install the Wireless P-T-P Ethernet Extender. It covers procedures to

assist you in avoiding unforeseen problems.

Related Documentation

You can download a user manual from ftp://ftp.blackbox.com/anonymous/manuals/L/LWE100A_rev2_user.pdf.

724-746-5500 | blackbox.com

Page 3

Table of Contents

1. Introduction ................................................................................................................................................................4

2. Preparing for Installation ......................................................................................................................................................4

2.1 Professional Installation Required.................................................................................................................................4

2.2 Safety Precautions .......................................................................................................................................................4

2.3 Installation Precautions ................................................................................................................................................5

2.4 What’s Included...........................................................................................................................................................5

2.5 Component Descriptions .............................................................................................................................................5

3. System Installation...............................................................................................................................................................8

3.1 Installation Steps..........................................................................................................................................................8

3.2 Using the External Antenna....................................................................................................................................... 12

3.3 Using the Grounding Wire......................................................................................................................................... 13

4. Configuration Steps............................................................................................................................................................ 14

4.1 AP Mode .............................................................................................................................................................. 15

4.2 Wireless Client Mode................................................................................................................................................. 16

4.3 Bridge Mode ............................................................................................................................................................. 18

4.4 AP Repeater Mode ....................................................................................................................................................20

724-746-5500 | blackbox.com

Page 4

Chapter 1: Introduction; Chapter 2: Preparing for Installation

Available Models

LWE100A-KIT

The kit is plug-and-play. Simply remove the units from the package and connect the Wireless Ethernet Extenders to your network.

Be sure to align them with each other using the LED indicators on the sides of the units to achieve the best possible link. You

must have line-of-sight for the units to line up. Each unit is configured as a bridge. The software is already configured.'

You must have the default IP addresses for the Wireless Ethernet Extender Kit:

BBox_Bridge1 (192.168.1.2), BBox_Bridge2 (192.168.1.24).

The default username and password for the Wireless Ethernet Extender Kit is:

Username: admin

Password: password

NOTE: If the units are factory defaulted, they will no longer retain the wireless bridge configuration and will need to be

reconfigured. Contact Black Box Technical Support at 724-746-5500 or info@blackbox.com for assistance.

LWE100A

See the rest of this quick start guide for information about installing and configuring the unit as an access point (AP), customer

premises equipment (CPE), wireless distribution system (WDS), or AP repeater.

1. Introduction

The Wireless P-T-P Ethernet Extender is a multimode last-mile broadband solution for customers using wireless ISPs (WISPs) and

system integrators. It complies with the IEEE 802.11n standard and features high-power output. The Wireless P-T-P Ethernet

Extender supports high bandwidth with long range for outdoor applications.

Use the Wireless P-T-P Ethernet Extender as an AP, CPE, WDS, or AP repeater. You can deploy the extender outdoors as an access

point to provide outdoor wireless internet service. Or, use the extender as an outdoor CPE—it receives wireless signals over the

last mile, helping wireless Internet service providers (WISPs) deliver internet service where wired broadband internet service, such

as cable and DSL, is not possible. The easy-to-install Wireless P-T-P Ethernet Extender covers 2.4-GHz bands, providing outstand-

ing throughput performance outdoors.

2. Preparing for Installation

Read this chapter before installing the extender. It describes safety precautions and needed product information.

2.1 Professional Installation Required

Use a professional installer who is well trained in RF installation and knowledgeable about local regulations.

2.2 Safety Precautions

For your safety and proper hardware installation, read and follow these safety precautions:

1. If you are installing the Wireless P-T-P Ethernet Extender for the first time, for your safety as well as others’, use a professional

installer who is trained on the safety hazards involved.

2. Keep safety as well as performance in mind when selecting your installation site, especially where there are electric power and

phone lines.

724-746-5500 | blackbox.com

Page 5

Chapter 2: Preparing for Installation

3. When installing the Wireless P-T-P Ethernet Extender, note the following things:

Do not use a metal ladder.

Do not work on a wet or windy day.

Wear shoes with rubber soles and heels, rubber gloves, and a long-sleeved shirt or jacket.

4. When the system is operating, avoid standing directly in front of it. Strong RF fields are present when the transmitter is on.

2.3 Installation Precautions

Read and follow these installation precautions:

1. Users MUST use a proper and well-installed grounding and surge arrestor with the Wireless P-T-P Ethernet Extender; otherwise,

lightning could easily cause fatal damage to the Wireless P-T-P Ethernet Extender.

CAUTION: EMD (Lightning) DAMAGE IS NOT COVERED UNDER WARRANTY.

2. Users MUST use the power cord and PoE injector shipped in the box with the Wireless P-T-P Ethernet Extender. Using other

components will cause damage to the extender.

3. Users MUST power off the Wireless P-T-P Ethernet Extender first before connecting the external antenna to it. Do not switch

from the built-in antenna to the external antenna via Web management without physically attaching the external antenna onto

the Wireless P-T-P Ethernet Extender; otherwise, the extender might be damaged.

2.4 What’s Included

Your package should contain the following items. If anything is missing or damaged, contact Black Box Technical Support at

724-746-5500 or info@blackbox.com.

• Wireless P-T-P Ethernet Extender

• Pole-mounting ring

• Power cord and PoE injector

• This Quick Installation Guide

NOTE: You can access the user manual at ftp://ftp.blackbox.com/anonymous/manuals/L/LWE100A_rev2_user.pdf.

2.5 Component Descriptions

Figure 2-1 shows the LWE100A. Figure 2-2 illustrates the pole mounting ring, and Figure 2-3 shows the power cord and PoE

injector.

724-746-5500 | blackbox.com

Page 6

Chapter 2: Preparing for Installation

Figure 2-1. LWE100A Ethernet extender.

Figure 2-2. Pole-mounting ring.

724-746-5500 | blackbox.com

Page 7

Chapter 2: Preparing for Installation

Figure 2-3. Power cord and PoE injector.

WARNING: Users MUST use the power cord and PoE injector shipped in the box with the Wireless P-T-P Ethernet Extender. Using

other options will damage the extender.

724-746-5500 | blackbox.com

Page 8

Chapter 3: System Installation

3. System Installation

3.1 Installation Steps

1. On the bottom of the Wireless P-T-P Ethernet Extender is a removable cover. Grab the cover and pull it back gently to remove it

as shown in Figure 3-1.

Figure 3-1. Removing the bottom cover.

2. Plug a standard Ethernet cable into the RJ-45 port. See Figure 3-2.

Figure 3-2. Plugging in the cable.

3. Slide the cover back to seal the bottom of the Wireless P-T-P Ethernet Extender.

724-746-5500 | blackbox.com

Page 9

Chapter 3: System Installation

Figure 3-3. Replacing the cover.

4. Take out the power cord and PoE injector, and plug the power cord into the DC port of the PoE injector.

5. Connect what you assembled in Steps 3 and 4 together by plugging the other side of the Ethernet cable from Step 3 into the

PoE port of the PoE injector in Step 4.

6. Turn over the Wireless P-T-P Ethernet Extender. Put the pole mounting ring through the middle hole of the Wireless P-T-P

Ethernet Extender.

NOTE: Use a screwdriver to unlock the pole-mounting ring before putting it through the Wireless P-T-P Ethernet Extender as

shown in the right picture in Figure 3-4.

724-746-5500 | blackbox.com

Page 10

Chapter 3: System Installation

Figure 3-4. Unlocking the pole-mounting ring.

7. Mount the Wireless P-T-P Ethernet Extender securely to the pole by locking the pole mounting ring tightly.

Figure 3-5. Mounting the extender to a pole.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Black Box Extender Handbücher

Black Box

Black Box Extreme T LB323A Bedienungsanleitung

Black Box

Black Box RemotePort Bedienungsanleitung

Black Box

Black Box IC101A Bedienungsanleitung

Black Box

Black Box AC550A Bedienungsanleitung

Black Box

Black Box ACU1600A Bedienungsanleitung

Black Box

Black Box ACS4001A-MM Bedienungsanleitung

Black Box

Black Box IC401A-R2 Bedienungsanleitung

Black Box

Black Box LS900A Bedienungsanleitung

Black Box

Black Box ServSwitch ACU3001A Bedienungsanleitung

Black Box

Black Box AC1080A Bedienungsanleitung

Black Box

Black Box LBLP01A-KIT Bedienungsanleitung

Black Box

Black Box IC247A Bedienungsanleitung

Black Box

Black Box EMERALD PE DUAL-HEAD Bedienungsanleitung

Black Box

Black Box ACS2004A Bedienungsanleitung

Black Box

Black Box ACU1500A-R3 Bedienungsanleitung

Black Box

Black Box ServSwitch ACU2009A Bedienungsanleitung

Black Box

Black Box ACS253A-CT Bedienungsanleitung

Black Box

Black Box ServSwitch ACU3001A Bedienungsanleitung

Black Box

Black Box ACS2009A-R2 Bedienungsanleitung

Black Box

Black Box 4KDPKVMXT-100M-R2 Bedienungsanleitung

Black Box

Black Box Agility ACR1002 DP Bedienungsanleitung

Black Box

Black Box LB401A Bedienungsanleitung

Black Box

Black Box ServSwitch ACX300 Bedienungsanleitung

Black Box

Black Box EMD4000R Bedienungsanleitung

Beliebte Extender Handbücher anderer Marken

SY HDBT-60T Bedienungsanleitung

Appsys ProAudio

Appsys ProAudio ADX-16 Bedienungsanleitung

Atlona

Atlona RS232 Bedienungsanleitung

IDK

IDK OPF-TH1000-A Bedienungsanleitung

Enable-IT

Enable-IT 824WP Bedienungsanleitung

Worx

Worx Landroid RadioLink WA0864 Technisches Datenblatt

TP-Link

TP-Link TL-WA730RE Bedienungsanleitung

Camplex

Camplex CMX-HDMI-SFPL Bedienungsanleitung

SC&T

SC&T HE03-4K Bedienungsanleitung

Samsung

Samsung SCS-26UC4 Bedienungsanleitung

Foxun

Foxun SX-GES24 Bedienungsanleitung

MuxLab

MuxLab 500771 Bedienungsanleitung

foxunhd

foxunhd SX-AEX01 Bedienungsanleitung

TERK Technologies

TERK Technologies LFIRX2 Bedienungsanleitung

Devolo

Devolo Audio Extender Handbuch

Edimax

Edimax EW-7438RPn V2 Bedienungsanleitung

Shinybow USA

Shinybow USA SB-6335T5 Bedienungsanleitung

SECO-LARM

SECO-LARM ENFORCER EVT-PB1-V1TGQ Bedienungsanleitung