Black Box AVSW-VGA8X8-B Bedienungsanleitung

BL A C K B OX®

Switch (8) source devices with VGA plus audio

and IR to (8) displays with VGA plus audio.

Use for high-definition LCD television or plasma display applications.

8 x 8 VGA Matrix Switch RS-232 Protocol Manual

Order toll-free in the U.S.: Call 877-877-BBOX (outside U.S. call 724-746-5500)

FREE technical support 24 hours a day, 7 days a week: Call 724-746-5500 or fax 724-746-0746

Mailing address: Black Box Corporation, 1000 Park Drive, Lawrence, PA 15055-1018

Web site: www.blackbox.com • E-mail: info@blackbox.com

Customer

Support

Information

AVSW-VGA8x8-B

724-746-5500 | blackbox.com

Page 2

8 x 8 VGA Matrix Switch RS-232 Protocol Manual

RS-232 Protocol and Command

RS-232 Cable Pin Lines

Matrix Switch RS-232 pins out, PC RS-232 pins,

DB9 female connector DB9 male connector

Not connected 1----------------------------------------------------------------------------- 1 Not connected

TX 2----------------------------------------------------------------------------- 2 RX

RX 3----------------------------------------------------------------------------- 3 TX

Not connected 4----------------------------------------------------------------------------- 4 Not connected

GND 5----------------------------------------------------------------------------- 5 GND

Not connected 6----------------------------------------------------------------------------- 6 Not connected

Not connected 7----------------------------------------------------------------------------- 7 Not connected

Not connected 8----------------------------------------------------------------------------- 8 Not connected

Not connected 9----------------------------------------------------------------------------- 9 Not connected

1. Transmission rate: 9600 bps

2. Data format: 8 data bits, no parity, 1 start bit, and 1 stop bit

3. Flow control: None

Also known as 9600, 8, n, 1.

Data String Format

The Data String contains four elements:

[Command][ ][Data][;]

The format is:

1. Command

2. Space

3. Data

4. ;

There is a single space after the Command and before the Data string. The data string must conclude with a semicolon “;”

(without the quotes). All text is full ASCII Code and is NOT case sensitive. You can use either capital letters or lower-case letters

and get the same result.

The LINK command must be sent first. This establishes a communications link between an external controller or computer and the

device you want to control. When you have an established link, communication via the IR port is disabled. The front panel remains

operational.

724-746-5500 | blackbox.com

Page 3

8 x 8 VGA Matrix Switch RS-232 Protocol Manual

The format is:

LINK 01; This will establish the link.

LINK 00; This will terminate the link.

Devices that are firmware version x.x or higher will return a status. This status is command dependent.

For example: Response [SKU][ ][Status][;]

The Status is a two-digit numerical code. See page 4 in this document for specific details.

Commands

NOTE: Not all commands are supported on all devices.

Commands

Item Command Description

1Link Establish or disable the data link between the controller and the device.

2Power Set/check the status of power.

3Output [d] Set/check the status of single outputs.

4ActiveSource Check the status of an input for a signal present.

5OutputAll Set/check the status of all outputs.

6Recall Recall a saved matrix configuration from memory.

7Recall [mm] Check the memory address data.

8Memory Save the current matrix.

9Lock Set/check the status of lock.

10 EDID Set/check EDID (VGA only).

11 Signal Format Sets V + A, A only.

1. Link

Function Command Response Description

Leave Link 00; AVSWVGA8X8B 00; Leave

AVSWVGA8X8B 01; Command not recognized

Link Link 01; AVSWVGA8X8B 00; Link

AVSWVGA8X8B 01; Command not recognized

Check Link Condition Link ?; Link 00;

Link 01;

System Leave

System Link

2. Power

Function Command Response Description

Power OFF Power 00; AVSWVGA8X8B 00; Power off

AVSWVGA8X8B 01; Command not recognized

Power ON Power 01; AVSWVGA8X8B 00; Power on

AVSWVGA8X8B 01; Command not recognized

Check Power Status Power ?; Power 00;

Power 01;

Power off

Power on

724-746-5500 | blackbox.com

Page 4

8 x 8 VGA Matrix Switch RS-232 Protocol Manual

3. Output [dd]

Function Command Response Description

OFF source OUTPUT01 00; AVSWVGA8X8B 00; Output 1 is off

AVSWVGA8X8B 01; Command not recognized

OUTPUT02 00; AVSWVGA8X8B 00; Output 2 is off

AVSWVGA8X8B 01; Command not recognized

OUTPUT03 00; AVSWVGA8X8B 00; Output 3 is off

AVSWVGA8X8B 01; Command not recognized

OUTPUT04 00; AVSWVGA8X8B 00; Output 4 is off

AVSWVGA8X8B 01; Command not recognized

OUTPUT05 00; AVSWVGA8X8B 00; Output 5 is off

AVSWVGA8X8B 01; Command not recognized

OUTPUT06 00; AVSWVGA8X8B 00; Output 6 is off

AVSWVGA8X8B 01; Command not recognized

OUTPUT07 00; AVSWVGA8X8B 00; Output 7 is off

AVSWVGA8X8B 01; Command not recognized

OUTPUT08 00; AVSWVGA8X8B 00; Output 8 is off

AVSWVGA8X8B 01; Command not recognized

Set channel status OUTPUT01 01; AVSWVGA8X8B 00; Set output 1 to input 1

AVSWVGA8X8B 01; Command not recognized

OUTPUT01 02; AVSWVGA8X8B 00; Set output 1 to input 2

AVSWVGA8X8B 01; Command not recognized

OUTPUT01 03; AVSWVGA8X8B 00; Set output 1 to input 3

AVSWVGA8X8B 01; Command not recognized

OUTPUT01 04; AVSWVGA8X8B 00; Set output 1 to input 4

AVSWVGA8X8B 01; Command not recognized

OUTPUT01 05; AVSWVGA8X8B 00; Set output 1 to input 5

AVSWVGA8X8B 01; Command not recognized

OUTPUT01 06; AVSWVGA8X8B 00; Set output 1 to input 6

AVSWVGA8X8B 01; Command not recognized

OUTPUT01 07; AVSWVGA8X8B 00; Set output 1 to input 7

AVSWVGA8X8B 01; Command not recognized

OUTPUT01 08; AVSWVGA8X8B 00; Set output 1 to input 8

AVSWVGA8X8B 01; Command not recognized

Set channel status OUTPUT02 01; AVSWVGA8X8B 00; Set output 2 to input 1

AVSWVGA8X8B 01; Command not recognized

OUTPUT02 02; AVSWVGA8X8B 00; Set output 2 to input 2

AVSWVGA8X8B 01; Command not recognized

OUTPUT02 03; AVSWVGA8X8B 00; Set output 2 to input 3

AVSWVGA8X8B 01; Command not recognized

OUTPUT02 04; AVSWVGA8X8B 00; Set output 2 to input 4

AVSWVGA8X8B 01; Command not recognized

OUTPUT02 05; AVSWVGA8X8B 00; Set output 2 to input 5

AVSWVGA8X8B 01; Command not recognized

724-746-5500 | blackbox.com

Page 5

8 x 8 VGA Matrix Switch RS-232 Protocol Manual

3. Output [dd] (continued)

Function Command Response Description

Set channel status OUTPUT02 06; AVSWVGA8X8B 00; Set output 2 to input 6

AVSWVGA8X8B 01; Command not recognized

OUTPUT02 07; AVSWVGA8X8B 00; Set output 2 to input 7

AVSWVGA8X8B 01; Command not recognized

OUTPUT02 08; AVSWVGA8X8B 00; Set output 2 to input 8

AVSWVGA8X8B 01; Command not recognized

OUTPUT03 01; AVSWVGA8X8B 00; Set output 3 to input 1

AVSWVGA8X8B 01; Command not recognized

OUTPUT03 02; AVSWVGA8X8B 00; Set output 3 to input 2

AVSWVGA8X8B 01; Command not recognized

OUTPUT03 03; AVSWVGA8X8B 00; Set output 3 to input 3

AVSWVGA8X8B 01; Command not recognized

OUTPUT03 04; AVSWVGA8X8B 00; Set output 3 to input 4

AVSWVGA8X8B 01; Command not recognized

OUTPUT03 05; AVSWVGA8X8B 00; Set output 3 to input 5

AVSWVGA8X8B 01; Command not recognized

OUTPUT03 06; AVSWVGA8X8B 00; Set output 3 to input 6

AVSWVGA8X8B 01; Command not recognized

OUTPUT03 07; AVSWVGA8X8B 00; Set output 3 to input 7

AVSWVGA8X8B 01; Command not recognized

OUTPUT03 08; AVSWVGA8X8B 00; Set output 3 to input 8

AVSWVGA8X8B 01; Command not recognized

Set channel status OUTPUT04 01; AVSWVGA8X8B 00; Set output 4 to input 1

AVSWVGA8X8B 01; Command not recognized

OUTPUT04 02; AVSWVGA8X8B 00; Set output 4 to input 2

AVSWVGA8X8B 01; Command not recognized

OUTPUT04 03; AVSWVGA8X8B 00; Set output 4 to input 3

AVSWVGA8X8B 01; Command not recognized

OUTPUT04 04; AVSWVGA8X8B 00; Set output 4 to input 4

AVSWVGA8X8B 01; Command not recognized

OUTPUT04 05; AVSWVGA8X8B 00; Set output 4 to input 5

AVSWVGA8X8B 01; Command not recognized

OUTPUT04 06; AVSWVGA8X8B 00; Set output 4 to input 6

AVSWVGA8X8B 01; Command not recognized

OUTPUT04 07; AVSWVGA8X8B 00; Set output 4 to input 7

AVSWVGA8X8B 01; Command not recognized

OUTPUT04 08; AVSWVGA8X8B 00; Set output 4 to input 8

AVSWVGA8X8B 01; Command not recognized

Set Channel Status OUTPUT05 01; AVSWVGA8X8B 00; Set output 5 to input 1

AVSWVGA8X8B 01; Command not recognized

724-746-5500 | blackbox.com

Page 6

8 x 8 VGA Matrix Switch RS-232 Protocol Manual

3. Output [dd] (continued)

Function Command Response Description

OUTPUT05 02; AVSWVGA8X8B 00; Set output 5 to input 2

AVSWVGA8X8B 01; Command not recognized

OUTPUT05 03; AVSWVGA8X8B 00; Set output 5 to input 3

AVSWVGA8X8B 01; Command not recognized

OUTPUT05 04; AVSWVGA8X8B 00; Set output 5 to input 4

AVSWVGA8X8B 01; Command not recognized

OUTPUT05 05; AVSWVGA8X8B 00; Set output 5 to input 5

AVSWVGA8X8B 01; Command not recognized

OUTPUT05 06; AVSWVGA8X8B 00; Set output 5 to input 6

AVSWVGA8X8B 01; Command not recognized

OUTPUT05 07; AVSWVGA8X8B 00; Set output 5 to input 7

AVSWVGA8X8B 01; Command not recognized

OUTPUT05 08; AVSWVGA8X8B 00; Set output 5 to input 8

AVSWVGA8X8B 01; Command not recognized

Set Channel Status OUTPUT06 01; AVSWVGA8X8B 00; Set output 6 to input 1

AVSWVGA8X8B 01; Command not recognized

OUTPUT06 02; AVSWVGA8X8B 00; Set output 6 to input 2

AVSWVGA8X8B 01; Command not recognized

OUTPUT06 03; AVSWVGA8X8B 00; Set output 6 to input 3

AVSWVGA8X8B 01; Command not recognized

OUTPUT06 04; AVSWVGA8X8B 00; Set output 6 to input 4

AVSWVGA8X8B 01; Command not recognized

OUTPUT06 05; AVSWVGA8X8B 00; Set output 6 to input 5

AVSWVGA8X8B 01; Command not recognized

OUTPUT06 06; AVSWVGA8X8B 00; Set output 6 to input 6

AVSWVGA8X8B 01; Command not recognized

OUTPUT06 07; AVSWVGA8X8B 00; Set output 6 to input 7

AVSWVGA8X8B 01; Command not recognized

OUTPUT06 08; AVSWVGA8X8B 00; Set output 6 to input 8

AVSWVGA8X8B 01; Command not recognized

Set Channel Status OUTPUT07 01; AVSWVGA8X8B 00; Set output 7 to input 1

AVSWVGA8X8B 01; Command not recognized

OUTPUT07 02; AVSWVGA8X8B 00; Set output 7 to input 2

AVSWVGA8X8B 01; Command not recognized

OUTPUT07 03; AVSWVGA8X8B 00; Set output 7 to input 3

AVSWVGA8X8B 01; Command not recognized

OUTPUT07 04; AVSWVGA8X8B 00; Set output 7 to input 4

AVSWVGA8X8B 01; Command not recognized

OUTPUT07 05; AVSWVGA8X8B 00; Set output 7 to input 5

AVSWVGA8X8B 01; Command not recognized

724-746-5500 | blackbox.com

Page 7

8 x 8 VGA Matrix Switch RS-232 Protocol Manual

3. Output [dd] (continued)

Function Command Response Description

Set Channel Status OUTPUT07 06; AVSWVGA8X8B 00; Set output 7 to input 6

AVSWVGA8X8B 01; Command not recognized

OUTPUT07 07; AVSWVGA8X8B 00; Set output 7 to input 7

AVSWVGA8X8B 01; Command not recognized

OUTPUT07 08; AVSWVGA8X8B 00; Set output 7 to input 8

AVSWVGA8X8B 01; Command not recognized

Set Channel Status OUTPUT08 01; AVSWVGA8X8B 00; Set output 8 to input 1

AVSWVGA8X8B 01; Command not recognized

OUTPUT08 02; AVSWVGA8X8B 00; Set output 8 to input 2

AVSWVGA8X8B 01; Command not recognized

OUTPUT08 03; AVSWVGA8X8B 00; Set output 8 to input 3

AVSWVGA8X8B 01; Command not recognized

OUTPUT08 04; AVSWVGA8X8B 00; Set output 8 to input 4

AVSWVGA8X8B 01; Command not recognized

OUTPUT08 05; AVSWVGA8X8B 00; Set output 8 to input 5

AVSWVGA8X8B 01; Command not recognized

OUTPUT08 06; AVSWVGA8X8B 00; Set output 8 to input 6

AVSWVGA8X8B 01; Command not recognized

OUTPUT08 07; AVSWVGA8X8B 00; Set output 8 to input 7

AVSWVGA8X8B 01; Command not recognized

OUTPUT08 08; AVSWVGA8X8B 00; Set output 8 to input 8

AVSWVGA8X8B 01; Command not recognized

Check output status OUTPUT 01 ?; Output01 01; Output 1 to input 1

Output01 02; Output 1 to input 2

Output 01 03; Output 1 to input 3

Output 01 04; Output 1 to input 4

Output01 05; Output 1 to input 5

Output01 06; Output 1 to input 6

Output 01 07; Output 1 to input 7

Output 01 08; Output 1 to input 8

OUTPUT 02 ?; Output02 01; Output 2 to input 1

Output02 02; Output 2 to input 2

Output02 03; Output 2 to input 3

Output02 04; Output 2 to input 4

Output02 05; Output 2 to input 5

Output02 06; Output 2 to input 6

Output 02 07; Output 2 to input 7

Output 02 08; Output 2 to input 8

724-746-5500 | blackbox.com

Page 8

8 x 8 VGA Matrix Switch RS-232 Protocol Manual

3. Output [dd] (continued)

Function Command Response Description

Check output status OUTPUT 03 ?; Output03 01; Output 3 to input 1

Output03 02; Output 3 to input 2

Output 03 03; Output 3 to input 3

Output 03 04; Output 3 to input 4

Output03 05; Output 3 to input 5

Output03 06; Output 3 to input 6

Output 03 07; Output 3 to input 7

Output 03 08; Output 3 to input 8

OUTPUT 04 ?; Output04 01; Output 4 to input 1

Output04 02; Output 4 to input 2

Output04 03; Output 4 to input 3

Output04 04; Output 4 to input 4

Output04 05; Output 4 to input 5

Output04 06; Output 4 to input 6

Output 04 07; Output 4 to input 7

Output 04 08; Output 4 to input 8

OUTPUT 05 ?; Output05 01; Output 5 to input 1

Output05 02; Output 5 to input 2

Output05 03; Output 5 to input 3

Output05 04; Output 5 to input 4

Output05 05; Output 5 to input 5

Output05 06; Output 5 to input 6

Output05 07; Output 5 to input 7

Output05 08; Output 5 to input 8

OUTPUT 06 ?; Output06 01; Output 6 to input 1

Output06 02; Output 6 to input 2

Output06 03; Output 6 to input 3

Output06 04; Output 6 to input 4

Output06 05; Output 6 to input 5

Output06 06; Output 6 to input 6

Output06 07; Output 6 to input 7

Output06 08; Output 6 to input 8

OUTPUT 07 ?; Output07 01; Output 7 to input 1

Output07 02; Output 7 to input 2

Output07 03; Output 7 to input 3

Output07 04; Output 7 to input 4

Output07 05; Output 7 to input 5

Output07 06; Output 7 to input 6

Output07 07; Output 7 to input 7

Output08 08; Output 7 to input 8

724-746-5500 | blackbox.com

Page 9

8 x 8 VGA Matrix Switch RS-232 Protocol Manual

3. Output [dd] (continued)

Function Command Response Description

Check output status OUTPUT 08 ?; Output08 01; Output 8 to input 1

Output08 02; Output 8 to input 2

Output 08 03; Output 8 to input 3

Output 08 04; Output 8 to input 4

Output08 05; Output 8 to input 5

Output08 06; Output 8 to input 6

Output08 07; Output 8 to input 7

Output08 08; Output 8 to input 8

4. Active Source

Function Command Response Description

Check the status of a signal on an input port ACTIVESOURCE ?; ActiveSource 0100; Input 1 = 01 so the signal is active.

Input 2 = 00 so the signal is inactive.

ActiveSource 0101; Input 1 = 01 so the signal is active.

Input 2 = 01 so the signal is inactive.

ActiveSource 0000; Input 1 = 00 so the signal is active.

Input 2 = 00 so the signal is inactive.

NOTE: This does not validate if the signal is within proper format (ex. 1VPP Video), only that one is present and active.

724-746-5500 | blackbox.com

Page 10

8 x 8 VGA Matrix Switch RS-232 Protocol Manual

5. OutputAll

Function Command Response Description

Set all outputs to off OUTPUTALL 00; AVSWVGA8X8B 00; Unlock

AVSWVGA8X8B 01; Command not recognized

Set all outputs to one source OUTPUTALL 01; AVSWVGA8X8B 00; Set all outputs to Source 1

AVSWVGA8X8B 01; Command not recognized

OUTPUTALL 02; AVSWVGA8X8B 00; Set all outputs to Source 2

AVSWVGA8X8B 01; Command not recognized

OUTPUTALL 03; AVSWVGA8X8B 00; Set all outputs to Source 3

AVSWVGA8X8B 01; Command not recognized

OUTPUTALL 04; AVSWVGA8X8B 00; Set all outputs to Source 4

AVSWVGA8X8B 01; Command not recognized

OUTPUTALL 05; AVSWVGA8X8B 00; Set all outputs to Source 5

AVSWVGA8X8B 01; Command not recognized

OUTPUTALL 06; AVSWVGA8X8B 00; Set all outputs to Source 6

AVSWVGA8X8B 01; Command not recognized

OUTPUTALL 07; AVSWVGA8X8B 00; Set all outputs to Source 7

AVSWVGA8X8B 01; Command not recognized

OUTPUTALL 08; AVSWVGA8X8B 00; Set all outputs to Source 8

AVSWVGA8X8B 01; Command not recognized

Check the status of all outputs OUTPUTALL

01020304

Response all outputs

status

Output1=01, output 1 to input 1

Output2=-02, output2 to input2

Output3=03, output3 to input 3

Output4=04, output 4 to input 4

Output4=05, output 5 to input 5

Output4=06, output 4 to input 6

Output4=07; output 4 to input 7

Output4=08, output 4 to input 8

Andere Handbücher für AVSW-VGA8X8-B

Inhaltsverzeichnis

Andere Black Box Schalten Handbücher

Black Box

Black Box SERVSWITCH ACU1006DRA Bedienungsanleitung

Black Box

Black Box ServSwitch KV752AE Bedienungsanleitung

Black Box

Black Box KV2004A Bedienungsanleitung

Black Box

Black Box SW613A Bedienungsanleitung

Black Box

Black Box SW202A Bedienungsanleitung

Black Box

Black Box SW175A Bedienungsanleitung

Black Box

Black Box Stackable MiniHub Bedienungsanleitung

Black Box

Black Box LBH100A-PD-ST-24 Bedienungsanleitung

Black Box

Black Box LGB1048A Bedienungsanleitung

Black Box

Black Box LPB208A-R2 Bedienungsanleitung

Black Box

Black Box MODULAR SMART SWITCH SW925AE Bedienungsanleitung

Black Box

Black Box SM025A-FFF Bedienungsanleitung

Black Box

Black Box SW542A Bedienungsanleitung

Black Box

Black Box MT720A-232T Bedienungsanleitung

Black Box

Black Box KVM2016A Bedienungsanleitung

Black Box

Black Box LEV2525A Sicherheitsleitfaden

Black Box

Black Box USB Single-Port Hub IC266A Bedienungsanleitung

Black Box

Black Box IC650A Bedienungsanleitung

Black Box

Black Box MT760A Bedienungsanleitung

Black Box

Black Box IC254A-US Bedienungsanleitung

Black Box

Black Box AVSW-HDMI8X8-X Bedienungsanleitung

Black Box

Black Box IC562A Bedienungsanleitung

Black Box

Black Box LGB105A Betriebsanleitung

Black Box

Black Box ServSwitch Octet KV1701 Bedienungsanleitung

Beliebte Schalten Handbücher anderer Marken

URC

URC Total Control MFS-8 Bedienungsanleitung

Azbil

Azbil HPQ-D11 Bedienungsanleitung

Sony

Sony DFS-900M Bedienungsanleitung

SICK

SICK i17S Bedienungsanleitung

F&F

F&F SZR-277 Bedienungsanleitung

Shure

Shure UAMS/BK Bedienungsanleitung

Dräger

Dräger X-zone Switch Off Bedienungsanleitung

Asco

Asco Joucomatic 349 Series Bedienungsanleitung

BT Mini Hub Bedienungsanleitung

D-Link

D-Link DES-1226G Bedienungsanleitung

Johnson Controls

Johnson Controls FS80-C Bedienungsanleitung

MicroNet

MicroNet SP1200A Bedienungsanleitung

Ruijie

Ruijie RG-PF2920 Series Installations- und Betriebsanleitung

Altinex

Altinex DA1914SX Bedienungsanleitung

RJM

RJM MASTERMIND PBC/6X Bedienungsanleitung

Atlas

Atlas MMK-KVM8 Bedienungsanleitung

Cabletron Systems

Cabletron Systems GIGAswitch GSR-16 Bedienungsanleitung

Cisco

Cisco Catalyst X4448 Handbuch