Black Box ICI207A Bedienungsanleitung
724-746-5500 | blackbox.com724-746-5500 | blackbox.com 724-746-5500 | blackbox.com
Page 5 Page 6
© Copyright 2013. Black Box Corporation. All rights reserved.
Black Box and the Double Diamond logo are registered trademarks of
BB Technologies, Inc. Any other trademarks mentioned in this manual
are acknowledged to be the property of the trademark owners
ICI207A, version 1
BL A C K B O X®
Quick Start Guide
Isolated and non-isolated models available.
Industrial Grade 7-Port USB Hubs
ICI207A
ICI208A
Black Box Tech
Support: FREE! Live.
24 / 7. Tech support
the way it should be.
Great tech support is just 30 seconds
away at 724-746-5500 or blackbox.com.
Order toll-free in the U.S.:
Call 877-877-BBOX
(outside U.S. call 1-724-746-5500)
FREE technical support
24 hours a day, 7 days a week:
Call 724-746-5500 or
fax 724-746-0746
Mailing address:
Black Box Corporation
1000 Park Drive
Lawrence, PA 15055-1018
Web site: www.blackbox.com
E-mail: info@blackbox.com
Customer
Support
Information
BL A C K B O X®
Industrial Grade 7-Port USB Hub
Table 1. LED indicators.
LED Type State Description
USB Power
ON
The hub is running on USB power.
External power is not applied. The hub
can supply up to 100 mA power per
downstream port.
OFF The hub is either using external power, or
no power is present.
External Power
ON
External power is applied, and an active
host connection exists. The hub will
provide 500 mA per downstream port.
OFF The hub is bus powered (ICI207A only)or
no power is present (ICI208A).
Port LEDs 1–7
ON Port is active and ready for use.
OFF Port has a fault. Power may need to be
cycled.
Troubleshooting
Problem: The hub is installed, but a downstream
device isn’t working.
Solution: Some USB devices get their power from the
USB cable. If you are using the ICI207A without an
external power supply, it will only provide 100 mA to
the downstream ports. If your devices need more
power, connect an external power supply to the
ICI207A. It will then provide 500 mA to the
downstream ports.
Problem: Do I need drivers for the hub?
Solution: No, the operating system will detect it and
install it automatically.
Problem: How can I be sure it has been installed?
Solution: The new hub will be listed in the Device
Manager.
Troubleshooting (Continued from page 5)
Problem: Can I use USB 1.1 and USB 2.0 devices
together?
Solution: Yes. USB 2.0 is backwards-compatible with
USB 1.0 and 1.1.
724-746-5500 | blackbox.com724-746-5500 | blackbox.com 724-746-5500 | blackbox.com
Industrial Grade 7-Port USB Hub Industrial Grade 7-Port USB HubIndustrial Grade 7-Port USB Hub
Page 3Page 2 Page 4
What’s Included
Your package should include the following items. If
anything is missing or damaged, contact Black Box
Technical Support at 724-746-5500 or
info@blackbox.com.
• (1) Industrial Grade 7-Port USB Hub
• (1) USB cable
• (2) panel-mount adapters and (4) mounting screws
• (1) DIN rail adapter and (3) mounting screws
• This quick start guide
NOTE: A power supply is not included.
Overview
Figure 1 shows the front view of the hub. Figure 2
shows the side view.
To USB host LED
indicators Downstream
ports
Figure 1. Front view.
Detachable
terminal
block
Barrel power
plug
Figure 2. Side view
Installation Steps
Step 1: Mounting
DIN rail mounting: Attach the DIN rail bracket with
the flat surface of the bracket facing the back of the
hub, as shown in Figure 3.
DIN rail
bracket
Figure 3. DIN rail bracket attached to hub.
Panel mounting: Attach the panel-mount brackets to
either side of the hub. They can be attached in (4)
positions: up, down, forward, and backward.
Panel-mount
brackets
Figure 4. Panel-mount bracket positions.
Step 2: Connect the Power Supply
ICI207A: The non-isolated Industrial Grade 7-Port USB
Hub (ICI207A) can operate without an external power
supply. When the hub is running on USB power,
it provides a maximum of 100 mA to each of the
downstream ports.
ICI208A: Unike the non-isolated hub, the isolated
Industrial Grade 7-Port USB Hub (ICI208A) will not
operate without an external power supply. You can
use the detachable terminal block input or the locking
barrel jack. The terminal block is polarity protected.
When powered, the ICI207A and ICI208A will provide
500 mA to each downstream port. They require 10
to 30 VDC of external power and will consume a
maximum of 16 W.
NOTE: The ICI208A adds 4-kV isolation.
Step 3: Grounding
We recommend that you ground the chassis. Connect
a grounding wire from the green ground lug to a
good source of earth ground.
Figure 5. Grounding the chassis.
Step 4: LED Status
Figure 6 shows the LEDs on the ICI207A and ICI208A.
Table 1 describes their functions.
Figure 6. ICI207A.
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
Andere Black Box Schalten Handbücher
Black Box
Black Box SERVSWITCH PANTHER KV1108A Bedienungsanleitung
Black Box
Black Box ACXC Series Bedienungsanleitung
Black Box
Black Box KV6222H Bedienungsanleitung
Black Box
Black Box LGH1004A Bedienungsanleitung
Black Box
Black Box ServSwitch Spectra Bedienungsanleitung
Black Box
Black Box PI9120A Bedienungsanleitung
Black Box
Black Box LPB2810A Bedienungsanleitung
Black Box
Black Box 12-Port 1000BASE-TX L2 Managed PoE Switch Bedienungsanleitung
Black Box
Black Box SW1046A Bedienungsanleitung
Black Box
Black Box ServSwitch DT Basic II KV7024A Bedienungsanleitung
Black Box
Black Box IC440A Bedienungsanleitung
Black Box
Black Box ME500A Bedienungsanleitung
Black Box
Black Box AVS-HDMI2-8X8 Bedienungsanleitung
Black Box
Black Box LGB2118A Bedienungsanleitung
Black Box
Black Box KV1416A-R2 Bedienungsanleitung
Black Box
Black Box 2-Port ServSwitch KV7002A Bedienungsanleitung
Black Box
Black Box SW216A Bedienungsanleitung
Black Box
Black Box ServSwitch ACU5001A Bedienungsanleitung
Black Box
Black Box AC1030A Bedienungsanleitung
Black Box
Black Box SW1002A Bedienungsanleitung
