Black Box KV120A Bedienungsanleitung

SERVSWITCH™ FAMILY

Welcome to the ServSwitch™ Family!

Thank you for purchasing a BLACK BOX® ServSelect IP! We appreciate your

business, and we think you’ll appreciate the many ways that your new ServSelect IP

will save you money, time, and effort.

That’s because our ServSwitch family is all about breaking away from the traditional,

expensive model of computer management. You know, the one-sizefits-all-even-if-it-

doesn’t model that says, “One computer gets one user station, no more, no less.” Why

not a single user station (monitor, keyboard, and mouse) for multiple computers—even

computers of different platforms? Why not a pair of user stations, each of which can

control multiple computers? Why not multiple user stations for the same computer?

With our ServSwitch products, there’s no reason why not. We carry a broad line of

robust solutions for all these applications. Do you have just two PCs, and need an

economical alternative to keeping two monitors, keyboards, and mice on your desk?

Or do you need to share dozens of computers, including a mix of IBM® PC,

RS/6000®, Apple® Macintosh®, Sun Microsystems®, and SGI™ compatibles

among multiple users with different access levels? Does your switch have to sit

solidly on a worktable and use regular everyday cables? Or does it have to be

mounted in an equipment rack and use convenient many-to-one cables? No matter

how large or small your setup is, no matter how simple or how complex, we’re

confident we have a ServSwitch system that’s just right for you.

The ServSwitch™ family from BLACK BOX—the one-stop answer for all your

KVM switching needs!

This manual will tell you all about your new ServSelect IP, including how to install,

operate, and troubleshoot it. For an introduction to the ServSelect IP, see Chapter 2.

The ServSelect IP product codes covered in this manual are:

KV120A KV120E KV121A KV212E

This manual also includes information about the ServSelect IP Software and the

Server Access Modules, which have their own manuals or installation guides:

KV125A KV126A KV127A KV128A

And this manual also includes information about the ServSwitch™ Multi Z8 switch:

KV158A

SERVSELECT™ IP INSTALLER/USER GUIDE

COMPLIANCE STATEMENTS

FEDERAL COMMUNICATIONS COMMISSION AND

INDUSTRY CANADA

RADIO-FREQUENCY INTERFERENCE STATEMENTS

This equipment generates, uses, and can radiate radio-frequency energy and if not

installed and used properly, that is, in strict accordance with the manufacturer’s

instructions, may cause interference to radio communication. It has been tested and

found to comply with the limits for a Class A computing device in accordance with

the specifications in Subpart B of Part 15 of FCC rules, which are designed to

provide reasonable protection against such interference when the equipment is

operated in a commercial environment. Operation of this equipment in a residential

area is likely to cause interference, in which case the user at his own expense will be

required to take whatever measures may be necessary to correct the interference.

Changes or modifications not expressly approved by the party responsible for

compliance could void the user’s authority to operate the equipment.

This digital apparatus does not exceed the Class A limits for radio noise emission from

digital apparatus set out in the Radio Interference Regulation of Industry Canada.

Le présent appareil numérique n’émet pas de bruits radioélectriques dépassant les

limites applicables aux appareils numériques de la classe A prescrites dans le

Règlement sur le brouillage radioélectrique publié par Industrie Canada.

EUROPEAN UNION DECLARATION OF CONFORMITY

This equipment has been tested and found to comply with the limits for a class A

computing device in accordance with the specifications in the European standard

EN55022. These limits are designed to provide reasonable protection against

harmful interference. This equipment generates, uses and can radiate radio-

frequency energy, and if not installed and used in accordance with the instructions,

might cause harmful interference to radio or television reception.

However, there is no guarantee that harmful interference will not occur in a

particular installation. If this equipment does cause interference to radio or television

reception, which can be determined by turning the equipment on and off, you can

correct the interference with one or more of the following measures:

(a) Reorient or relocate the receiving antenna.

(b) Increase the separation between the equipment and the receiver.

receiver is connected.

(d) Consult the supplier or an experienced radio/TV technician for help.

SERVSELECT™ IP INSTALLER/USER GUIDE

COMPLIANCE STATEMENTS

Shielded cables must be used with this equipment to maintain compliance with radio

frequency energy emission regulations and ensure a suitably high level of immunity

to electromagnetic disturbances. This equipment has also been found to comply with

European standards EN50082 and EN60950.

Japanese Compliance Statement

Other Agency Approvals

UL 1950, CSA C22. 2 No. 950, IEC 950

Republic of Korea EMI Standard Certificate Number: E-F900-01-2012 (A)

TRADEMARKS USED IN THIS MANUAL

BLACK BOX and the logo are registered trademarks, and ServSwitch,

ServSelect, and ServSelect IP are trademarks, of BLACK BOX Corporation.

Apple, Mac, and Macintosh are registered trademarks of Apple Computer, Inc.

IBM, PS/2, and RS/6000 are registered trademarks of International Business

Machines Corporation.

Microsoft, HyperTerminal, Windows, Windows NT, and Windows XP are

trademarks or registered trademarks of Microsoft Corporation in the United States

and/or other countries.

Sun and Sun Microsystems are registered trademarks of Sun Microsystems, Inc. in

the United States and other countries.

UL is a registered trademark of Underwriters Laboratories Inc.

Any other trademarks mentioned in this manual are acknowledged to be the property

of the trademark owners.

SERVSELECT™ IP INSTALLER/USER GUIDE

NOM STATEMENT

Normas Oficiales Mexicanas (NOM)

Electrical Safety Statement

INSTRUCCIONES DE SEGURIDAD

1. Todas las instrucciones de seguridad y operación deberán ser leídas antes de

que el aparato eléctrico sea operado.

2. Las instrucciones de seguridad y operación deberán ser guardadas para

referencia futura.

3. Todas las advertencias en el aparato eléctrico y en sus instrucciones de

operación deben ser respetadas.

4. Todas las instrucciones de operación y uso deben ser seguidas.

5. El aparato eléctrico no deberá ser usado cerca del agua—por ejemplo, cerca de

la tina de baño, lavabo, sótano mojado o cerca de una alberca, etc.

6. El aparato eléctrico debe ser usado únicamente con carritos o pedestales que

sean recomendados por el fabricante.

7. El aparato eléctrico debe ser montado a la pared o al techo sólo como sea

recomendado por el fabricante.

8. Servicio—El usuario no debe intentar dar servicio al equipo eléctrico más allá a

lo descrito en las instrucciones de operación. Todo otro servicio deberá ser

referido a personal de servicio calicado.

9. El aparato eléctrico debe ser situado de tal manera que su posición no interera

su uso. La colocación del aparato eléctrico sobre una cama, sofá, alfombra o

supercie similar puede bloquea la ventilación, no se debe colocar en libreros o

gabinetes que impidan el ujo de aire por los oricios de ventilación.

10. El equipo eléctrico deber ser situado fuera del alcance de fuentes de calor como

radiadores, registros de calor, estufas u otros aparatos (incluyendo

amplicadores) que producen calor.

11. El aparato eléctrico deberá ser connectado a una fuente de poder sólo del tipo

descrito en el instructivo de operación, o como se indique en el aparato.

12. Precaución debe ser tomada de tal manera que la tierra sica y la polarización

del equipo no sea eliminada.

13. Los cables de la fuente de poder deben ser guiados de tal manera que no sean

pisados ni pellizcados por objetos colocados sobre o contra ellos, poniendo

particular atención a los contactos y receptáculos donde salen del aparato.

14. El equipo eléctrico debe ser limpiado únicamente de acuerdo a las

recomendaciones del fabricante.

15. En caso de existir, una antena externa deberá ser localizada lejos de las lineas

de energia.

16. El cable de corriente deberá ser desconectado del cuando el equipo no sea

usado por un largo periodo de tiempo.

SERVSELECT™ IP INSTALLER/USER GUIDE

NOM STATEMENT

17. Cuidado debe ser tomado de tal manera que objectos liquidos no sean

derramados sobre la cubierta u oricios de ventilación.

18. Servicio por personal calicado deberá ser provisto cuando:

A: El cable de poder o el contacto ha sido dañado; u

B: Objectos han caído o líquido ha sido derramado dentro del aparato; o

C: El aparato ha sido expuesto a la lluvia; o

D: El aparato parece no operar normalmente o muestra un cambio en su

desempeño; o

E: El aparato ha sido tirado o su cubierta ha sido dañada.

SERVSELECT™ IP INSTALLER/USER GUIDE

CHAPTER 1: PRODUCT OVERVIEW

Contents

1. Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9

2. Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10

2.1 Features and Benefits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10

2.2 Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12

3. Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13

3.1 Getting Started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13

3.2 Rackmounting Your ServSelect IP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14

3.3 Installing the ServSelect IP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15

3.4 Setting Up Your ServSelect IP and Software . . . . . . . . . . . . . . . . . . . . . . . . . .19

4. Analog Port Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20

4.1 Controlling Your System at the Analog Port . . . . . . . . . . . . . . . . . . . . . . . . . . .20

4.2 Viewing and Selecting Ports and Servers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20

4.3 Navigating the OSD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23

4.4 Configuring the OSD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24

4.5 Viewing and Disconnecting User Connections . . . . . . . . . . . . . . . . . . . . . . . . .31

4.6 Resetting Your Keyboard and Mouse . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32

4.7 Displaying Version Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32

4.8 Scanning Your System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34

4.9 Broadcasting to Servers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36

5. Terminal Operations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38

6. Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40

6.1 Calling BLACK BOX . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40

6.2 Shipping and Packaging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40

Appendix: FLASH Upgrades . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .41

A.1 Upgrading the ServSelect IP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .41

A.2 Upgrading the SAM firmware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42

SERVSELECT™ IP INSTALLER/USER GUIDE

CHAPTER 1: PRODUCT OVERVIEW

1. Specifications

During the course of this product’s lifetime, modifications might be made to its

hardware or firmware that could cause these specifications to change without notice.

Agency Approvals

EN55022 Class A, EN55024, EN61000-3-3, FCC15 Class A,

VCCI Class A, IEC950, EN60950, UL 1950/60950 third

edition, CSA C22.2 No. 950

Server Ports

Number 16

Interface Type Proprietary composite of video, keyboard and mouse (to

SAM adapters)

Connectors RJ-45

Sync Types Separate horizontal and vertical

Plug and Play DDC2B

Video Resolution Analog Port Maximum 1600 x 1280 @ 75 Hz

Digital Port Maximum 1280 x 1024 @ 75 Hz

Conguration Port

Number 1

Interface Type Serial RS-232, DTE

Connector DB9 Female

Network Connection

Number 1

Interface Type Ethernet: IEEE 802.3, 10BASE-T,

Fast Ethernet: IEEE 802.3U, 100BASE-T

Connector RJ-45

Analog Port

Number 1

Interface Types PS/2 and VGA

Connectors (2) 6 pin MiniDIN, (1) HD15

Other Characteristics

Heat Dissipation 92 BTU/Hr

Airow 8 cfm

Temperature 10º to 50º Celsius (50º to 122º Fahrenheit) operating

-20º to 60º Celsius (-4º to 140º Fahrenheit) nonoperating

Humidity 20 to 80% noncondensing operating

5 to 95% noncondensing nonoperating

Power 100 to 240 VAC, 50 to 60 Hz (autosensing), 40 W maximum

AC-input current rating 1A

AC-input cable 18 AWG three-wire cable, with a three lead IEC-320

receptacle on the power supply end and a country or region

dependent plug on the power resource end

Power Consumption 25 W

Size (HxWxD) 4.45 x 43.18 x 27.94 cm 1U form factor

(1.75 x 17.00 x 11.00 in)

Weight 3.6 kg (8 lb) without cables

SERVSELECT™ IP INSTALLER/USER GUIDE

CHAPTER 2: INTRODUCTION

2. Introduction

2.1 Features and Benefits

The BLACK BOX® ServSelect™ IP switches combine analog and digital technology

to provide flexible, centralized control of data center servers. This solution delivers

secure digital access and flexible server management from anywhere at any time.

NOTE:

Throughout the text, the word “appliance” is used generically to describe the ServSelect IP switch.

The ServSelect IP consists of a rackmountable keyboard, video and mouse (KVM)

switch configurable for analog or digital connectivity. Each ServSelect IP has

16 Analog Rack Interface (ARI) ports for connecting devices and operates over

standard LAN connections. Access servers across a 100BASE-T Ethernet connection

or directly through an analog port on the ServSelect IP for analog KVM connectivity

and administration. Video resolutions through the analog port can be up to 1600 x

1280 with an end-to-end cable length of up to 15 meters (50 feet). Digital users can

achieve video resolution of up to 1280 x 1024 with a cable length of up to 10 meters

(32 feet) between the ServSelect IP and the server.

ServSelect IP - KV120

ServSelect IP - KV121

Number

servers* Digital

users

Analog

user

128 1 1

128 2 1

*Maximum number of servers with a fully configured KV158A switch attached to each of the 16 ARI ports.

Figure 2-1. ServSelect IP Model Comparison

Server Access Modules

The Server Access Module (SAM) with CAT5 design dramatically reduces cable

clutter, while providing optimal digital display resolution and video settings. The

built-in memory of the SAM simplifies configuration by assigning and retaining

unique server names or Electronic ID (EID) numbers for each attached server. This

integrated intelligence enhances security and prevents unauthorized access to a

server through cable manipulation. The SAM is powered directly from the server

and provides Keep Alive functionality even if the ServSelect IP is not powered.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Black Box Schalten Handbücher

Black Box

Black Box ServSelect III KV21008A Bedienungsanleitung

Black Box

Black Box SERVSWITCH Series Bedienungsanleitung

Black Box

Black Box ServSwitch Secure Plus (with USB) Bedienungsanleitung

Black Box

Black Box LGB1048A Bedienungsanleitung

Black Box

Black Box Remote Management Switch SW555A Bedienungsanleitung

Black Box

Black Box LGB5510A Programmierhandbuch

Black Box

Black Box VSW-HDMI2X1-4K Bedienungsanleitung

Black Box

Black Box LGB1152A Bedienungsanleitung

Black Box

Black Box ClassWork Junior Bedienungsanleitung

Black Box

Black Box KV9628A Bedienungsanleitung

Black Box

Black Box LE2650A Bedienungsanleitung

Black Box

Black Box ServSwitch Uno USB Kurzanleitung

Black Box

Black Box ServSwitch Spectra Bedienungsanleitung

Black Box

Black Box KVP4004A Bedienungsanleitung

Black Box

Black Box LGH1000 Series Bedienungsanleitung

Black Box

Black Box LBH100A-SC Bedienungsanleitung

Black Box

Black Box 2 x 2 SCSI Matrix Switch SC121A Bedienungsanleitung

Black Box

Black Box LB9019A-R3 Bedienungsanleitung

Black Box

Black Box DCX3000 Bedienungsanleitung

Black Box

Black Box EMERALD EMD200DP-T Bedienungsanleitung

Black Box

Black Box SW488A Bedienungsanleitung

Black Box

Black Box LPB2810A Bedienungsanleitung

Black Box

Black Box ServSwitch Secure SW2006A-USB-EAL Bedienungsanleitung

Black Box

Black Box AVSW-VGA8X8-B Bedienungsanleitung

Beliebte Schalten Handbücher anderer Marken

URC

URC Total Control MFS-8 Bedienungsanleitung

Azbil

Azbil HPQ-D11 Bedienungsanleitung

Sony

Sony DFS-900M Bedienungsanleitung

SICK

SICK i17S Bedienungsanleitung

F&F

F&F SZR-277 Bedienungsanleitung

Shure

Shure UAMS/BK Bedienungsanleitung

Dräger

Dräger X-zone Switch Off Bedienungsanleitung

Asco

Asco Joucomatic 349 Series Bedienungsanleitung

BT Mini Hub Bedienungsanleitung

D-Link

D-Link DES-1226G Bedienungsanleitung

Johnson Controls

Johnson Controls FS80-C Bedienungsanleitung

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Bedienungsanleitung

MicroNet

MicroNet SP1200A Bedienungsanleitung

Ruijie

Ruijie RG-PF2920 Series Installations- und Betriebsanleitung

Altinex

Altinex DA1914SX Bedienungsanleitung

MiLAN

MiLAN MIL-SM2401M Bedienungsanleitung

RJM

RJM MASTERMIND PBC/6X Bedienungsanleitung

Atlas

Atlas MMK-KVM8 Bedienungsanleitung