Black Box LGB5124A-R2 Bedienungsanleitung

24/7 TECHNICAL SUPPORT AT 1.877.877.2269 OR VISIT BLACKBOX.COM

QUICK INSTALLATION GUIDE

SFP GIGABIT

MANAGED

SWITCH ECO

LGB5124A-R2, LGB5128A-R2

+ +

24685 7911

10 12 14 16

13 15 2017 19

LINK/ACT

CONSOLE

RST

AC INPUT: 100-240 VAC

ALM

SYS

PWR DC

PWR AC

CONSOLE

RTN -48V

28-PORT GbE

MANAGED

SWITCH

25 26 27 28

22 23 2324 24

21 22

TABLE OF CONTENTS

NEED HELP?

LEAVE THE TECH TO US

LIVE 24/7

TECHNICAL

SUPPORT

1.877.877. 2269

1. 8 7 7. 8 7 7. 2 2 6 9 BLACKBOX.COM

1. INTRODUCTION............................................................................................................................................................................. 3

1.1 Over view ....................................................................................................................................................................................................3

1.2 Front View of the Switch..........................................................................................................................................................................3

1.3 Rear View of the Switch ...........................................................................................................................................................................3

1.4 LED Descriptions ......................................................................................................................................................................................4

1.5 Reset Button .............................................................................................................................................................................................6

2. INSTALLING THE SWITCH ........................................................................................................................................................... 7

2.1 What’s Included ........................................................................................................................................................................................7

2.2 Mounting the Switch in a 19-inch Rack..................................................................................................................................................7

2.3 Mounting the Switch on a Desk or Shelf................................................................................................................................................8

2.4 Connecting the AC Power Cord ..............................................................................................................................................................9

2.5 Connecting the DC Power Cord ..............................................................................................................................................................9

2.6 Installing SFP/SFP+ Modules ...............................................................................................................................................................10

3. INITIAL CONFIGURATION OF THE SWITCH ............................................................................................................................. 11

3.1 Initial Switch Configuration Using Web Browsers...............................................................................................................................11

3.2 Initial Switch Configuration Procedure ................................................................................................................................................11

4. TROUBLESHOOTING................................................................................................................................................................... 13

5. DISCLAIMER/TRADEMARKS ..................................................................................................................................................... 14

5.1 Disclaimer ...............................................................................................................................................................................................14

5.2 Trademarks Used in this Manual ..........................................................................................................................................................14

NOTES:

Default IP address of the switch: 192.168.1.1

Default Subnet Mask of switch: 255.255.255.0

Default Username of the switch: admin

Default Password of the switch: NONE

1. 8 7 7. 8 7 7. 2 2 6 9 BLACKBOX.COM

NEED HELP?

LEAVE THE TECH TO US

LIVE 24/7

TECHNICAL

SUPPORT

1.877.877. 2269

CHAPTER 1: INTRODUCTION

1.1 OVERVIEW

This user guide describes how to install, configure, and troubleshoot the SFP Managed Switch Eco, part numbers LGB5124A-R2

and LGB5128A-R2. By reading this user guide, users can perform the following tasks:

Check the switch status via LEDs

Reset the switch or to restore the switch to factory defaults

Install the switch

Use a Web browser to initially configure the switch

Troubleshoot the switch

1.2 FRONT VIEW OF THE SWITCH

100 to 240 VAC

power input

AC power

LED

DC power

LED

100/1000

SFP ports

100/1000 RJ-45/SFP

combo ports

Console

port

48 VDC

power input

Reset

button

Alarm

LED

System

LED

Port Status

LEDs

1G/10G

SFP+ ports

FIGURE 1-1. FRONT PANEL OF THE SWITCH

1.3 REAR VIEW OF THE SWITCH

FIGURE 1-2. BACK PANEL OF THE SWITCH

41. 8 7 7. 8 7 7. 2 2 6 9 BLACKBOX.COM

NEED HELP?

LEAVE THE TECH TO US

LIVE 24/7

TECHNICAL

SUPPORT

1.877.877. 2269

CHAPTER 1: INTRODUCTION

1.4 LED DESCRIPTIONS

The LEDs on the front panel provide users with switch status checking and monitoring. There are two types of LEDs as follows:

AC/DC Power LED: Indicates if the switch is powered up correctly or not.

System LED: Indicates if the system is ready or not.

Alarm LED: Indicates if the system is normal or not.

Port Status LEDs: Indicates the current status of each port. Users can check these LEDs to understand the port status.

The following tables detail the functions and descriptions of various LED indicators.

TABLE 1-1. POWER LED

LED COLOR STATE DESCRIPTION

AC Power Green ON The switch is powered ON correctly

OFF The switch is not receiving power from power1

DC Power Green ON The switch is powered ON correctly

OFF The switch is not receiving power from power2

TABLE 1-2. SYSTEM LED

LED COLOR STATE DESCRIPTION

System Green

ON The switch is ready and running correctly

OFF The switch is not ready or failed

Blinking The switch is booting

TABLE 1-3. ALARM LED

LED COLOR STATE DESCRIPTION

Alarm Red ON An abnormal state, such as temperature, voltage or fan speed, has been detected in the switch

OFF The system is normal

1. 8 7 7. 8 7 7. 2 2 6 9 BLACKBOX.COM

NEED HELP?

LEAVE THE TECH TO US

LIVE 24/7

TECHNICAL

SUPPORT

1.877.877. 2269

CHAPTER 1: INTRODUCTION

TABLE 1-4. PORT STATUS LEDS

LED COLOR STATE DESCRIPTION

RJ-45 Ports

Green ON The port is enabled and has established a link to the connected device, and the connection speed

is 1000 Mbps.

Green Blinking The port is transmitting/receiving packets, and the connection speed is 1000 Mbps.

Amber ON The port is enabled and established a link to connected device, and the connection speed

is 10/100 Mbps.

Amber Blinking The port is transmitting/receiving packets, and the connection speed is 10/100 Mbps.

—OFF The port has no active network cable connected, or it is not established a link to connected device.

Otherwise, the port may have been disabled through the switch user interface.

SFP Ports

Green ON The port is enabled and established a link to connected device, and the connection speed

is 1000 Mbps.

Green Blinking The port is transmitting/receiving packets, and the connection speed is 1000 Mbps.

Amber ON The port is enabled and established a link to connected device, and the connection speed

is 100 Mbps.

Amber Blinking The port is transmitting/receiving packets, and the connection speed is 100 Mbps.

– OFF The port has no active network cable connected, or it has not established a link to a connected

device. Otherwise, the port may have been disabled through the switch user interface.

SFP+ Ports

Blue ON The port is enabled and established a link to connected device, and the connection speed

is 10 Gbps.

Blue Blinking The port is transmitting/receiving packets, and the connection speed is 10 Gbps.

Green ON The port is enabled and established a link to connected device, and the connection speed

is 1 Gbps.

Green Blinking The port is transmitting/receiving packets, and the connection speed is 1 Gbps.

– OFF The port has no active network cable connected, or it has not established a link to a connected

device. Otherwise, the port may have been disabled through the switch user interface.

61. 8 7 7. 8 7 7. 2 2 6 9 BLACKBOX.COM

NEED HELP?

LEAVE THE TECH TO US

LIVE 24/7

TECHNICAL

SUPPORT

1.877.877. 2269

CHAPTER 1: INTRODUCTION

1.5 RESET BUTTON

Press the Reset button to:

Reset the Switch: Reboot and get the switch back to the previous configuration settings saved.

TABLE 1-5. RESET BUTTON

TASK TIME TO PRESS BUTTON SYS LED PORT STATUS LED

Reset the Switch 2 to 7 seconds Blinking Green All LEDs light OFF

1. 8 7 7. 8 7 7. 2 2 6 9 BLACKBOX.COM

NEED HELP?

LEAVE THE TECH TO US

LIVE 24/7

TECHNICAL

SUPPORT

1.877.877. 2269

CHAPTER 2: INSTALLING THE SWITCH

2.1 WHAT’S INCLUDED

Your package should include the following items. If anything is missing or damaged, contact Black Box Technical Support

at 877-877-2269 or info@blackbox.com

(1) Switch

(1) AC power cord

(1) terminal block

(4) adhesive rubber feet

This Quick Installation Guide

NOTE: The switch is an indoor device. If it is to be used with outdoor devices such as outdoor IP cameras or outdoor WiFi APs,

then users are strongly recommended to install a surge protector or surge suppressor to protect the switch.

2.2 MOUNTING THE SWITCH IN A 19-INCH RACK

STEP 1: Attach the mounting brackets to both sides of the chassis. Insert screws and tighten then with a screwdriver to secure

the brackets.

FIGURE 2-1. ATTACH THE MOUNTING BRACKETS

STEP 2: Place the switch on a rack shelf in the rack. Push it in until the oval holes in the brackets align with the mounting holes

in the rack posts.

81. 8 7 7. 8 7 7. 2 2 6 9 BLACKBOX.COM

NEED HELP?

LEAVE THE TECH TO US

LIVE 24/7

TECHNICAL

SUPPORT

1.877.877. 2269

CHAPTER 2: INSTALLING THE SWITCH

STEP 3: Attach the brackets to the posts. Insert screws and tighten them.

FIGURE 2-2. ATTACH THE BRACKETS TO THE RACK POST

2.3 MOUNTING THE SWITCH ON A DESK OR SHELF

STEP 1: Verify that the workbench is sturdy and reliably grounded.

STEP 2: Attach the four adhesive rubber feet to the bottom of the switch.

FIGURE 2-3. ATTACH THE RUBBER FEET

1. 8 7 7. 8 7 7. 2 2 6 9 BLACKBOX.COM

NEED HELP?

LEAVE THE TECH TO US

LIVE 24/7

TECHNICAL

SUPPORT

1.877.877. 2269

CHAPTER 2: INSTALLING THE SWITCH

2.4 CONNECTING THE AC POWER CORD

STEP 1: Connect the AC power cord to the AC power receptacle of switch.

STEP 2: Connect the other end of the AC power cord to the AC power outlet.

STEP 3: Check the SYS LED. If it is ON, the power connection is correct.

FIGURE 2-4. CONNECT THE AC POWER CORD

2.5 CONNECTING THE DC POWER CORD

STEP 1: Insert the negative/positive DC wires into the V-/V+ terminals, respectively.

STEP 2: To keep the DC wires from pulling loose, use a small flat-blade screwdriver to tighten the wire-clamp screws on the front

of the terminal block connector.

STEP 3: Insert the terminal block connector prongs into the terminal block receptor.

STEP 4: Check the SYS LED. If it is ON, the power connection is correct.

DC power input

FIGURE 2-5. CONNECT THE DC POWER CORD

10 1. 8 7 7. 8 7 7. 2 2 6 9 BLACKBOX.COM

NEED HELP?

LEAVE THE TECH TO US

LIVE 24/7

TECHNICAL

SUPPORT

1.877.877. 2269

CHAPTER 2: INSTALLING THE SWITCH

2.6 INSTALLING SFP/SFP+ MODULES

You can install or remove a mini-GBIC SFP/SFP+ module from an SFP/SFP+ port without having to power off the switch.

STEP 1: Insert the module into the SFP/SFP+ port.

STEP 2: Press firmly to ensure that the module seats into the connector.

FIGURE 2-6. INSTALL AN SFP/SFP+ MODULE INTO AN SFP/SFP+ PORT

NOTE: The SFP/SFP+ ports should use UL Listed Optional Transceiver product, Rated 3.3Vdc, Laser Class 1. Compatible modules

are listed below.

TABLE 2-1. COMPATIBLE SFP/SFP+ MODULES

PRODUCT CODE DESCRIPTION

LFP411 SFP, 1250-Mbps Fiber with Extended Diagnostics, 850-nm Multimode, 550 m LC

LFP412 SFP, 1250-Mbps Fiber with Extended Diagnostics, 1310-nm Multimode, 2 km LC

LFP413 SFP, 1250-Mbps Fiber with Extended Diagnostics, 1310-nm Single-Mode, 10 km LC

LFP414 SFP, 1250-Mbps Fiber with Extended Diagnostics, 1310-nm Single-Mode, 30 km LC

LFP415 SFP with SerDes Interface, 1250 Mbps, RJ45, 1000BASE-T, Extended Diagnostics

LFP416 SFP with SGMII Interface, 1250 Mbps, RJ45, 10/100/1000BASE-T, Extended Diagnostics

LFP417 SFP with SerDes Interface, 1250 Mbps, RJ45, 1000BASE-T, Extended Diagnostics

LFP418 SFP, 1250-Mbps Fiber with Extended Diagnostics, 1550-nm Single-Mode, 80 km, LC

LFP420 SFP, 1250-Mbps Simplex Fiber with Extended Diagnostics, 1550-nm TX, 1310-nm RX, Single-Mode, 10 km, LC

LFP421 SFP, 1250-Mbps Simplex Fiber with Extended Diagnostics, 1310-nm TX, 1550-nm RX, Single-Mode, 10 km, LC

LFP401 SFP, 155-Mbps Fiber with Extended Diagnostics, 850-nm Multimode, 2 km, LC

LFP402 SFP, 155-Mbps Fiber with Extended Diagnostics, 1310-nm Multimode, 2 km, LC

LFP403 SFP, 155-Mbps Fiber with Extended Diagnostics, 1310-nm Single-Mode, 30 km, LC

LPF404 SFP, 155-Mbps Fiber with Extended Diagnostics, 1310-nm Single-Mode, 60 km, LC

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Black Box Schalten Handbücher

Black Box

Black Box VGA to Video Portable Plus Stücklistenhandbuch

Black Box

Black Box HS523 Bedienungsanleitung

Black Box

Black Box ServSwitch ACU5501A-R4 Bedienungsanleitung

Black Box

Black Box LBH21xA-H-SFP Bedienungsanleitung

Black Box

Black Box CATX DVI-D Series Bedienungsanleitung

Black Box

Black Box LPB208A-R2 Bedienungsanleitung

Black Box

Black Box ServSwitch II ACS250A Bedienungsanleitung

Black Box

Black Box ServSwitch Wizard SW651A Bedienungsanleitung

Black Box

Black Box LGS103AE Bedienungsanleitung

Black Box

Black Box KV9204A Bedienungsanleitung

Black Box

Black Box 26611 Bedienungsanleitung

Black Box

Black Box Hub Bedienungsanleitung

Black Box

Black Box ServSwitch DTX5000 Bedienungsanleitung

Black Box

Black Box SW1035A Bedienungsanleitung

Black Box

Black Box SM906C Bedienungsanleitung

Black Box

Black Box ME500A Bedienungsanleitung

Black Box

Black Box SW175A Bedienungsanleitung

Black Box

Black Box PFBS120 Bedienungsanleitung

Black Box

Black Box LBH120A-H SERIES Bedienungsanleitung

Black Box

Black Box LB9006A-SC Bedienungsanleitung

Black Box

Black Box IC1020A Bedienungsanleitung

Black Box

Black Box SWI030A Bedienungsanleitung

Black Box

Black Box LB8405A-R3 Bedienungsanleitung

Black Box

Black Box Freedom II Series Bedienungsanleitung

Beliebte Schalten Handbücher anderer Marken

URC

URC Total Control MFS-8 Bedienungsanleitung

Azbil

Azbil HPQ-D11 Bedienungsanleitung

Sony

Sony DFS-900M Bedienungsanleitung

SICK

SICK i17S Bedienungsanleitung

F&F

F&F SZR-277 Bedienungsanleitung

Shure

Shure UAMS/BK Bedienungsanleitung

Dräger

Dräger X-zone Switch Off Bedienungsanleitung

Asco

Asco Joucomatic 349 Series Bedienungsanleitung

BT Mini Hub Bedienungsanleitung

D-Link

D-Link DES-1226G Bedienungsanleitung

Johnson Controls

Johnson Controls FS80-C Bedienungsanleitung

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Bedienungsanleitung

MicroNet

MicroNet SP1200A Bedienungsanleitung

Ruijie

Ruijie RG-PF2920 Series Installations- und Betriebsanleitung

Altinex

Altinex DA1914SX Bedienungsanleitung

MiLAN

MiLAN MIL-SM2401M Bedienungsanleitung

RJM

RJM MASTERMIND PBC/6X Bedienungsanleitung

Atlas

Atlas MMK-KVM8 Bedienungsanleitung