Black Box SS1P-SH-DVI-UCAC Bedienungsanleitung

24/7 TECHNICAL SUPPORT AT 1.877.877.2269 OR VISIT BLACKBOX.COM

SECURE

KVM

SWITCHES

SS2P, SS4P, SS8P, SS16P SERIES

EDID CONFIGURATION GUIDE

K/M

Audio

CONSOLE

Audio

K/M

Audio K/M K/M

Audio K/M

Audio

12VDC2.0A

IN-4 IN-3 IN-2 IN-1

CONSOLE

12VDC2.0A CAC AUDIO

K/M

AUDIO

K/M CAC

Audio

K/M CAC

DP OUT DP

Audio

K/M CAC

Audio

K/M CAC

DP DP

DP OUT DP DP

IN-4 IN-3

DP DP

IN-2 IN-1

12 3 4

2 PORT DP W/AUDIO AND CAC

SECURE KVM SWITCH

TABLE OF CONTENTS

NEED HELP?

LEAVE THE TECH TO US

LIVE 24/7

TECHNICAL

SUPPORT

1.877.877.2269

1. 8 7 7. 8 7 7. 2 2 69 BLACKBOX.COM

1. OV E RV IE W ...................................................................................................................................................................................... 3

1.1 Introducion ................................................................................................................................................................................................3

1.2 Intended Audience ...................................................................................................................................................................................4

2. SYSTEM REQUIREMENTS ............................................................................................................................................................ 5

3. SYSTEM SETUP............................................................................................................................................................................. 6

4. INITIATE SESSION ........................................................................................................................................................................ 7

5. ADMINISTRATOR FUNCTIONS .................................................................................................................................................... 8

5.1 Administrator - Login................................................................................................................................................................................8

5.2 Administrator - Select Mode (KVM/KM) Option #6..............................................................................................................................9

6. TROUBLESHOOTING................................................................................................................................................................... 10

6.1 No Video After Setting Local EDID........................................................................................................................................................10

6.2 No Video After Switching Display......................................................................................................................................................... 11

APPENDIX: DISCLAIMER/TRADEMARKS..................................................................................................................................... 12

A.1 Disclaimer............................................................................................................................................................................................... 12

A.2 Trademarks Used in this Manual..........................................................................................................................................................12

1. 8 7 7. 8 7 7. 2 2 69 BLACKBOX.COM

NEED HELP?

LEAVE THE TECH TO US

LIVE 24/7

TECHNICAL

SUPPORT

1.877.877.2269

CHAPTER 1: OVERVIEW

1.1 INTRODUCTION

The Secure KVM Switch EDID Configuration Guide outlines how Authenticated Administrators can learn and configure EDID of a

particular display to support all of your displays’ features.

Factory default video EDID is set to HP (1080P max resolution) to allow initial operation with most of the DP display brands. For

security reasons, EDID learn of most DP displays’ brands can be achieved only by an Authenticated Administrator.

This guide is applicable for the following Secure KVM Switch models:

SPECIFICATION COMPARISON CHART

PRODUCT CODE NUMBER OF PORTS VIDEO CONNECTOR DUAL-HEAD OR

SINGLE-HEAD

CAC USB

EMULATION

SPECIAL FEATURES

SS1P-SH-DVI-UCAC 1DVI-I SINGLE YES YES ISOLATOR

SS2P-SH-DVI-U 2DVI-I SINGLE NO YES —

SS2P-SH-DVI-UCAC 2DVI-I SINGLE YES YES —

SS2P-DH-DVI-U 2DVI-D DUAL NO YES —

SS2P-DH-DVI-UCAC 2DVI-D DUAL YES YES —

SS2P-SH-DP-U 2DISPLAYPORT SINGLE NO YES —

SS2P-SH-DP-UCAC 2DISPLAYPORT SINGLE YES YES —

SS2P-DH-DP-U 2DISPLAYPORT DUAL NO YES —

SS2P-DH-DP-UCAC 2DISPLAYPORT DUAL YES YES —

SS2P-SH-HDMI-U 2HDMI SINGLE NO YES —

SS2P-SH-HDMI-UCAC 2HDMI SINGLE YES YES —

SS2P-DH-HDMI-U 2HDMI DUAL NO YES —

SS2P-DH-HDMI-UCAC 2HDMI DUAL YES YES —

SS4P-SH-DVI-U 4DVI-I SINGLE NO YES —

SS4P-SH-DVI-UCAC 4DVI-I SINGLE YES YES —

SS4P-DH-DVI-U 4DVI-I DUAL NO YES —

SS4P-DH-DVI-UCAC 4DVI-I DUAL YES YES —

SS4P-SH-DP-U 4DISPLAYPORT SINGLE NO YES —

SS4P-SH-DP-UCAC 4DISPLAYPORT SINGLE YES YES —

SS4P-DH-DP-U 4DISPLAYPORT DUAL NO YES —

SS4P-DH-DP-UCAC 4DISPLAYPORT DUAL YES YES —

SS4P-SH-HDMI-U 4HDMI SINGLE NO YES —

SS4P-SH-HDMI-UCAC 4HDMI SINGLE YES YES —

SS4P-DH-HDMI-U 4HDMI DUAL NO YES —

SS4P-DH-HDMI-UCAC 4HDMI DUAL YES YES —

SS4P-QH-DVI-UCAC 4DVI-I QUAD YES YES —

SS4P-QH-DP-UCAC 4DISPL AYPORT QUAD YES YES —

SS4P-QH-HDMI-UCAC 4HDMI QUAD YES YES —

SS4P-DVI-4X2-UCAC 4, 2 USERS DVI-I SINGLE YES YES MATRIX

SS4P-DVI-4X4-UCAC 4, 4 USERS DVI-I SINGLE YES YES MATRIX

SS4P-SH-DVI-UCAC-P 4DVI-I SINGLE YES YES PREVIEW

SS8P-SH-DVI-U 8DVI-I SINGLE NO YES —

SS8P-SH-DVI-UCAC 8DVI-I SINGLE YES YES —

SS8P-DH-DVI-U 8DVI-I DUAL NO YES —

SS8P-DH-DVI-UCAC 8DVI-I DUAL YES YES —

SS8P-SH-DP-U 8DISPLAYPORT SINGLE NO YES —

SS8P-SH-DP-UCAC 8DISPLAYPORT SINGLE YES YES —

41. 8 7 7. 8 7 7. 2 2 69 BLACKBOX.COM

NEED HELP?

LEAVE THE TECH TO US

LIVE 24/7

TECHNICAL

SUPPORT

1.877.877.2269

CHAPTER 1: OVERVIEW

SPECIFICATION COMPARISON CHART (CONTINUED)

PRODUCT CODE NUMBER OF PORTS VIDEO CONNECTOR DUAL-HEAD OR

SINGLE-HEAD

CAC USB

EMULATION

SPECIAL FEATURES

SS8P-DVI-8X2-UCAC 8, 2 USERS DVI-I SINGLE YES YES MATRIX

SS8P-DVI-8X4-UCAC 8, 4 USERS DVI-I SINGLE YES YES MATRIX

SS16P-SH-DVI-U 16 DVI-I SINGLE NO YES —

SS16P-SH-DVI-UCAC 16 DVI-I SINGLE YES YES —

SS4P-KM-U 4N/A N/A NO YES —

SS4P-KM-UCAC 4N/A N/A YES YES —

SS8P-KM-U 8N/A N/A NO YES —

SS8P-KM-UCAC 8N/A N/A YES YES —

1.2 INTENDED AUDIENCE

The information in this document is for authorized system administrators.

1. 8 7 7. 8 7 7. 2 2 69 BLACKBOX.COM

NEED HELP?

LEAVE THE TECH TO US

LIVE 24/7

TECHNICAL

SUPPORT

1.877.877.2269

CHAPTER 2: SYSTEM REQUIREMENTS

1. The Black Box Secure KVM Switches are compatible with standard personal/portable computers, servers, or thin-clients running

operating systems such as Windows or Linux.

The Administration and Security Management Tool can only run on Windows operating systems (XP, Win 7, Win 8, and Win 10 with

framework .NET 2.0 or newer).

2. The peripheral devices that are supported by the switch are listed in the following table.

TABLE 2-1. PERIPHERAL DEVICES SUPPORTED BY THE SWITCH

CONSOLE PORT AUTHORIZED DEVICES

Keyboard Wired keyboard and keypad without internal USB hub or composite device functions, unless the connected device

has at least one endpoint that is a keyboard or mouse HID class, KVM/KM extender

Display Display, Projector, Video or KVM extender

Audio out Analog amplified speakers, Analog headphones, Digital audio appliances

Mouse/pointing device Any wired mouse or trackball without internal USB hub or composite device functions, Touch-screen, Multi-touch or

digitizer, KVM extender

User authentication device Smart-card reader, PIV/CAC reader, Token or Biometric reader*

*CAC models only

61. 8 7 7. 8 7 7. 2 2 69 BLACKBOX.COM

NEED HELP?

LEAVE THE TECH TO US

LIVE 24/7

TECHNICAL

SUPPORT

1.877.877.2269

CHAPTER 3: SYSTEM SETUP

NOTE: Only one computer connected to KVM port 1 is required for any activity in this guide.

1. Ensure that the KVM’s power is turned off or disconnected from both the unit and the computer.

2. Using a USB cable (Type-A to Type-B), connect the PC to the KVM host’s K/M port one.

3. Connect a USB keyboard and mouse to the two USB console ports.

4. Connect a DP video cable between the PC and the KVM video 1 port.

5. KVM—Connect a DP display to the KVM console video output connector.

6. Power up the PC and the KVM.

7. Download the Administration and Security Management Tool from the following link to your PC NEED BB URL - http://ipgard.com/

tools-software/

8. Run the Administration and Security Management Tool executable file.

See Figure 3-1 for a screenshot of the tool you should be seeing on your screen.

File

1. Press “Alt-Alt-cnfg” to Initiate The Session

2. Press “Esc-Esc” to End The Session

FIGURE 3-1. ADMINISTRATION AND SECURITY MANAGEMENT TOOL

1. 8 7 7. 8 7 7. 2 2 69 BLACKBOX.COM

NEED HELP?

LEAVE THE TECH TO US

LIVE 24/7

TECHNICAL

SUPPORT

1.877.877.2269

CHAPTER 4: INITIATE SESSION

1. Using the keyboard, press “Alt Alt cnfg.”

2. At this stage, the mouse connected to the KVM will stop functioning.

3. Figure 4-1 is a screenshot of the tool you should be seeing on your screen.

File

1. Press “Alt-Alt-cnfg” to Initiate The Session

2. Press “Esc-Esc” to End The Session

Starting session. Enter credential id

===>

FIGURE 4-1. INITIATE SESSION CAPTURE

81. 8 7 7. 8 7 7. 2 2 69 BLACKBOX.COM

NEED HELP?

LEAVE THE TECH TO US

LIVE 24/7

TECHNICAL

SUPPORT

1.877.877.2269

CHAPTER 5: ADMINISTRATOR FUNCTIONS

5.1 ADMINISTRATOR - LOGIN

1. Enter the default username “admin” and press Enter.

2. Enter the default password “12345” and press Enter.

3. Figure 5-1 is a screenshot of the tool you should be seeing on your screen.

File

1. Press “Alt-Alt-cnfg” to Initiate The Session

2. Press “Esc-Esc” to End The Session

Starting session. Enter credential id

===> admin

Enter credential password

0. Show this menu

1. Change User Credentials

2. Change Admin Credentials

3. View Registered CAC Device

4. Register New CAC Device

5. Dump Log

6. Select Mode

7. Restore Factory Defaults

FIGURE 5-1. ADMINISTRATOR - LOGIN SCREEN

1. 8 7 7. 8 7 7. 2 2 69 BLACKBOX.COM

NEED HELP?

LEAVE THE TECH TO US

LIVE 24/7

TECHNICAL

SUPPORT

1.877.877.2269

CHAPTER 5: ADMINISTRATOR FUNCTIONS

5.2 ADMINISTRATOR - SELECT MODE (KVM/KM) OPTION #6

1. Select option 6 from the menu on your screen and press enter.

2. The following menu will be presented (see Figure 5-2).

File

1. Press “Alt-Alt-cnfg” to Initiate The Session

2. Press “Esc-Esc” to End The Session

Enter credential password

0. Show this menu

1. Change User Credentials

2. Change Admin Credentials

3. View Registered CAC Device

4. Register New CAC Device

5. Dump Log

6. Select Mode

7. Restore Factory Defaults

=> 6

Select Mode: 1. KVM

2. KM

3. Custom

Current mode is KVM

===>

FIGURE 5-2. ADMINISTRATOR - SELECT MODE

3. Type “local” for reading and learning the connected display’s EDID.

4. Press the Enter key on your keyboard. The learned EDID will be stored and the device will be reset.

5. At the end of the boot-up, ensure that all computers are connected to the KVM and switch through each port to verify that all are

properly presenting video on the connected display.

10 1. 8 7 7. 8 7 7. 2 2 69 BLACKBOX.COM

NEED HELP?

LEAVE THE TECH TO US

LIVE 24/7

TECHNICAL

SUPPORT

1.877.877.2269

CHAPTER 6: TROUBLESHOOTING

6.1 NO VIDEO AFTER SETTING LOCAL EDID

If there is no video output after performing the above, follow these steps:

1. Disconnect the display from the KVM Console Video port and connect it directly to your PC.

2. Run the Administration and Security Management Tool per instruction above.

3. Access the Administration and Security Management Tool per instruction above.

4. Select option 6 from the menu on your screen and press enter.

5. The following menu will be presented (see Figure 6-1).

File

1. Press “Alt-Alt-cnfg” to Initiate The Session

2. Press “Esc-Esc” to End The Session

Enter credential password

0. Show this menu

1. Change User Credentials

2. Change Admin Credentials

3. View Registered CAC Device

4. Register New CAC Device

5. Dump Log

6. Select Mode

7. Restore Factory Defaults

=> 6

Select Mode: 1. KVM

2. KM

3. Custom

Current mode is KVM

===>

FIGURE 6-1. ADMINISTRATOR - SELECT MODE

6. Type:

“dell” if the display brand you are trying to work with is DELL brand.

“samsung” if the display brand you are trying to work with is Samsung Brand.

“lg” if the display brand you are trying to work with is LG Brand.

“hp” if the display brand you are trying to work with is HP Brand.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Black Box Schalten Handbücher

Black Box

Black Box ServSwitch CX Uno KV0161A Bedienungsanleitung

Black Box

Black Box IC1026A Bedienungsanleitung

Black Box

Black Box ServSwitch KV1608C-R3 Bedienungsanleitung

Black Box

Black Box LGB5510A Bedienungsanleitung

Black Box

Black Box KV130A Bedienungsanleitung

Black Box

Black Box SW1002A Bedienungsanleitung

Black Box

Black Box LPB2810A Bedienungsanleitung

Black Box

Black Box MODULAR SMART SWITCH SW925AE Bedienungsanleitung

Black Box

Black Box 2 x 2 SCSI Matrix Switch SC121A Bedienungsanleitung

Black Box

Black Box KV2004A Bedienungsanleitung

Black Box

Black Box AC505A-2A Bedienungsanleitung

Black Box

Black Box SW1033A Bedienungsanleitung

Black Box

Black Box ServSwitch SW2007A-USB Bedienungsanleitung

Black Box

Black Box ServSwitch KV752AE Bedienungsanleitung

Black Box

Black Box KVS4-1002VM Bedienungsanleitung

Black Box

Black Box ServSwitch Octet KV1701 Bedienungsanleitung

Black Box

Black Box SW1007A Bedienungsanleitung

Black Box

Black Box ServSwitch DT Series Bedienungsanleitung

Black Box

Black Box LGB5510A Programmierhandbuch

Black Box

Black Box DPMSTHUB-4P Bedienungsanleitung

Black Box

Black Box VSW-HDMI2-4X1 Bedienungsanleitung

Black Box

Black Box ServSelect II KV2016A Montage- und Wartungsanleitung

Black Box

Black Box LHB8050A Bedienungsanleitung

Black Box

Black Box RS-422 Bedienungsanleitung

Beliebte Schalten Handbücher anderer Marken

URC

URC Total Control MFS-8 Bedienungsanleitung

Azbil

Azbil HPQ-D11 Bedienungsanleitung

Sony

Sony DFS-900M Bedienungsanleitung

SICK

SICK i17S Bedienungsanleitung

F&F

F&F SZR-277 Bedienungsanleitung

Shure

Shure UAMS/BK Bedienungsanleitung

Dräger

Dräger X-zone Switch Off Bedienungsanleitung

Asco

Asco Joucomatic 349 Series Bedienungsanleitung

BT Mini Hub Bedienungsanleitung

D-Link

D-Link DES-1226G Bedienungsanleitung

Johnson Controls

Johnson Controls FS80-C Bedienungsanleitung

MicroNet

MicroNet SP1200A Bedienungsanleitung

Ruijie

Ruijie RG-PF2920 Series Installations- und Betriebsanleitung

Altinex

Altinex DA1914SX Bedienungsanleitung

RJM

RJM MASTERMIND PBC/6X Bedienungsanleitung

Atlas

Atlas MMK-KVM8 Bedienungsanleitung

Cabletron Systems

Cabletron Systems GIGAswitch GSR-16 Bedienungsanleitung

Cisco

Cisco Catalyst X4448 Handbuch