724-746-5500 | blackbox.com
Page 2
802.11AC WiFi Dual-Band Router Quick Start Guide
1. Hardware Connection
a. Power off your modem and disconnect your existing router if you have one. (If the
modem has a backup battery, remove it, too.)
b. Use an Ethernet cable to connect the WAN port of the router to the modem’s
LAN port.
c. Use another Ethernet cable to connect your computer to one of the LAN port
labeled 1/2/3/4 on your router.
d. Turn on your modem and wait for 2 minutes. (Replace the battery if you removed
it previously.)
e. Plug the supplied power adapter into the POWER jack, and then press the ON/
OFF button to turn on the router and wait for 1 minute.
2. Router Configuration
To login to the router, set up the TCP/IP Protocol in “Obtain an IP address
automatically” mode on your PC(s). For detailed instructions, refer to Appendix B in
the User Manual.
To download the User Manual from our Web site:
The full user manual/installation guide can be downloaded from the Black Box Web
site, or the FTP site.
To download from the Web site:
• Go to www.blackbox.com
• Enter the part number in the search box:
• Click on the “Resources” tab on the product page, and select the document you
wish to download.
2a. To access the configuration utility, open a web-browser and type in the default
address http://192.168.1.1 in the address field of the browser.
2b. After a moment, a login window will appear. Enter admin for the User Name
and Password, both in lower case letters. Then click Login or press Enter.
