BLACK DECKER BV5600 Bedienungsanleitung

Instructions for Replacement of the Fan

Cover for BV5600, BV6000, and BV6600

Blower/Vacuum/Mulchers, Type 1

IMPORTANT SAFETY

WARNINGS AND

INSTRUCTIONS

WARNING:

Original fan cover has fallen off and users have sustained a

serious laceration to their hand and fingers.

Replace fan cover before using blower.

Continued use of current fan cover could result in serious

hand laceration, change to new fan cover provided and

immediately dispose of current fan cover to prevent anyinjury.

ASSEMBLY OF THE NEW FAN COVER

Step 1: Unplug blower from power source.

Step 2: Remove fan cover by pressing the release button on the

power head.

Step 3: Promptly dispose of the original fan cover (figure A Left)

following local solid waste disposal or recycling regulations.

Step 4: Fit new fan cover (figure A Right) onto the power head as

shown in figureB and push until an audible click is heard.

NOTE: The new fan cover has a raised wall that covers the

latch button on the blower.

Step 5: Apply replacement “Type 2” label over “Type 1” on nameplate

on side of power head.

Step 6: Make sure new fan cover is securely seated and latched into

position before powering blower.

TO REMOVE FAN COVER

If you need to remove new fan cover, insert a screwdriver or hex key in

the slot on the end of the fan cover (located on the back of the power

head) and rotate the fan cover to remove it as shown in figure C.

If you have any questions, call BLACK+DECKER at 1-866-937-9805

between 8 a.m. and 5 p.m., Eastern Time, Monday through Friday.

Part No. 90639454 07/16

8 8

final page size: 11 x 8.5 in

Left: Old fan cover

Gauche: Ancien capot du

ventilateur

Izquierda: Antigua cubierta

del ventilador

Right: New fan cover

Droite: Nouveau capot du

ventilateur

Derecha: Nueva cubierta del

ventilador

Instructions for Replacement of the Fan

Cover for BV5600, BV6000, and BV6600

Blower/Vacuum/Mulchers, Type 1

IMPORTANT SAFETY

WARNINGS AND

INSTRUCTIONS

WARNING:

Original fan cover has fallen off and users have sustained a

serious laceration to their hand and fingers.

Replace fan cover before using blower.

Continued use of current fan cover could result in serious

hand laceration, change to new fan cover provided and

immediately dispose of current fan cover to prevent anyinjury.

ASSEMBLY OF THE NEW FAN COVER

Step 1: Unplug blower from power source.

Step 2: Remove fan cover by pressing the release button on the

power head.

Step 3: Promptly dispose of the original fan cover (figure A Left)

following local solid waste disposal or recycling regulations.

Step 4: Fit new fan cover (figure A Right) onto the power head as

shown in figureB and push until an audible click is heard.

NOTE: The new fan cover has a raised wall that covers the

latch button on the blower.

Step 5: Apply replacement “Type 2” label over “Type 1” on nameplate

on side of power head.

Step 6: Make sure new fan cover is securely seated and latched into

position before powering blower.

TO REMOVE FAN COVER

If you need to remove new fan cover, insert a screwdriver or hex key in

the slot on the end of the fan cover (located on the back of the power

head) and rotate the fan cover to remove it as shown in figure C.

If you have any questions, call BLACK+DECKER at 1-866-937-9805

between 8 a.m. and 5 p.m., Eastern Time, Monday through Friday.

Part No. 90639454 07/16

8 8

final page size: 11 x 8.5 in

Left: Old fan cover

Gauche: Ancien capot du

ventilateur

Izquierda: Antigua cubierta

del ventilador

Right: New fan cover

Droite: Nouveau capot du

ventilateur

Derecha: Nueva cubierta del

ventilador

Instructions for Replacement of the Fan

Cover for BV5600, BV6000, and BV6600

Blower/Vacuum/Mulchers, Type 1

IMPORTANT SAFETY

WARNINGS AND

INSTRUCTIONS

WARNING:

Original fan cover has fallen off and users have sustained a

serious laceration to their hand and fingers.

Replace fan cover before using blower.

Continued use of current fan cover could result in serious

hand laceration, change to new fan cover provided and

immediately dispose of current fan cover to prevent anyinjury.

ASSEMBLY OF THE NEW FAN COVER

Step 1: Unplug blower from power source.

Step 2: Remove fan cover by pressing the release button on the

power head.

Step 3: Promptly dispose of the original fan cover (figure A Left)

following local solid waste disposal or recycling regulations.

Step 4: Fit new fan cover (figure A Right) onto the power head as

shown in figureB and push until an audible click is heard.

NOTE: The new fan cover has a raised wall that covers the

latch button on the blower.

Step 5: Apply replacement “Type 2” label over “Type 1” on nameplate

on side of power head.

Step 6: Make sure new fan cover is securely seated and latched into

position before powering blower.

TO REMOVE FAN COVER

If you need to remove new fan cover, insert a screwdriver or hex key in

the slot on the end of the fan cover (located on the back of the power

head) and rotate the fan cover to remove it as shown in figure C.

If you have any questions, call BLACK+DECKER at 1-866-937-9805

between 8 a.m. and 5 p.m., Eastern Time, Monday through Friday.

Part No. 90639454 07/16

8 8

final page size: 11 x 8.5 in

Left: Old fan cover

Gauche: Ancien capot du

ventilateur

Izquierda: Antigua cubierta

del ventilador

Right: New fan cover

Droite: Nouveau capot du

ventilateur

Derecha: Nueva cubierta del

ventilador

Andere Handbücher für BV5600

Inhaltsverzeichnis

Andere BLACK DECKER Gebläse Handbücher

BLACK DECKER

BLACK DECKER DVJ215B Bedienungsanleitung

BLACK DECKER

BLACK DECKER BEBL750 Bedienungsanleitung

BLACK DECKER

BLACK DECKER GWC54PC Bedienungsanleitung

BLACK DECKER

BLACK DECKER BEBLV300SB Bedienungsanleitung

BLACK DECKER

BLACK DECKER BCBL200 L25 Bedienungsanleitung

BLACK DECKER

BLACK DECKER BCASBL71B Bedienungsanleitung

BLACK DECKER

BLACK DECKER BCBLV36 Bedienungsanleitung

BLACK DECKER

BLACK DECKER BEBL185 Bedienungsanleitung

BLACK DECKER

BLACK DECKER BDB600 Bedienungsanleitung

BLACK DECKER

BLACK DECKER GWC54PCB Bedienungsanleitung

BLACK DECKER

BLACK DECKER GWC1815 Bedienungsanleitung

BLACK DECKER

BLACK DECKER GW3031BP Bedienungsanleitung

BLACK DECKER

BLACK DECKER BEBLV301 Bedienungsanleitung

BLACK DECKER

BLACK DECKER YARDMASTER BCASBL70 Bedienungsanleitung

BLACK DECKER

BLACK DECKER BEBL7000 Bedienungsanleitung

BLACK DECKER

BLACK DECKER BV5600 Gebrauchs- und Pflegehandbuch

BLACK DECKER

BLACK DECKER BEBLV301 Bedienungsanleitung

BLACK DECKER

BLACK DECKER BEBLV290 Bedienungsanleitung

BLACK DECKER

BLACK DECKER BEBLV230 Bedienungsanleitung

BLACK DECKER

BLACK DECKER GW3031BP Bedienungsanleitung

BLACK DECKER

BLACK DECKER BCBL700 Bedienungsanleitung

BLACK DECKER

BLACK DECKER BEBLV290 Bedienungsanleitung

BLACK DECKER

BLACK DECKER BEBLV290 Bedienungsanleitung

BLACK DECKER

BLACK DECKER STPT600 Bedienungsanleitung

Beliebte Gebläse Handbücher anderer Marken

Weed Eater

Weed Eater VS2000BV Bedienungsanleitung

KRAUSMANN

KRAUSMANN U37020-00 Bedienungsanleitung

Cub Cadet

Cub Cadet HB425 Bedienungsanleitung

GreenWorks Pro

GreenWorks Pro BLB482 Bedienungsanleitung

ARIETE

ARIETE 2768 Bedienungsanleitung

NuTone

NuTone 331H Bedienungsanleitung

GÜDE

GÜDE GLB 200 18 Li-Ion Bedienungsanleitung

I.VA.CO.

I.VA.CO. SC Series Betriebsanleitung

DeWalt

DeWalt DCE100 Bedienungsanleitung

Becker

Becker SV 7.330 Bedienungsanleitung

Metabo

Metabo AG 18 Pro Bedienungsanleitung

Desa

Desa GA3650TB Bedienungsanleitung

Echo

Echo Power Blower PB-230LN Bedienungsanleitung

Echo

Echo PB-413H Bedienungsanleitung

Black & Decker

Black & Decker BV3100 Bedienungsanleitung

Ryobi

Ryobi RY08570 Bedienungsanleitung

Haaga

Haaga 355 Bedienungsanleitung

Stiga

Stiga SBL 327 V Bedienungsanleitung