Blackboard WR5000 Bedienungsanleitung

403-003-000 Rev A

Blackboard Wall Reader (WR5000)

Installation Guide

403-003-000 Rev A

Table 1: Revision History

Bb Document Part Number Rev. Description Date

403-003-000 A ECO10418. Initial Release. PENDING

CONTENTS

403-003-000 Rev A I

1BLACKBOARD (WR5000) READER INSTALLATION GUIDE

2 Federal Communications Commission (FCC) statement

4 Hardware Kit and Parts List

5 Reader Installation Overview

5 Reader Wiring

5 Door Reader RS-485 Interface

6 Door Reader Wiegand Interface

7 Attendance Reader

8 Reader Mounting

10 Specifications

BLACKBOARD (WR5000) READER INSTALLATION GUIDE

403-003-000 REV A 1-1

BLACKBOARD (WR5000) READER INSTALLATION GUIDE

The Blackboard Wall Reader, Model WR5000, is a device for reading Blackboard contactless cards and

other credentials that use Near Field Communications (NFC) technology. The reader supports two modes

of operation; a door reader that interfaces to either the Blackboard Security Access System or third-party

control panels using a Wiegand interface. A second mode of operation is as an attendance reader.

Features:

• 4.0” LCD (480 x 800) with capacitive touch panel

• Configuration via touchscreen/display

•NFCtechnology

• RS-485 Serial Interface

• Bluetooth Low Energy (BLE)

• Host communications via 10/100 Base-T Ethernet (IP) or 802.11 b/g/n wireless

• Encrypted and authenticated IP communications

Figure 1-1 Blackboard WR500 Reader

FEDERAL COMMUNICATIONS COMMISSION (FCC) STATEMENT

403-003-000 REV A 1-2

FEDERAL COMMUNICATIONS COMMISSION (FCC) STATEMENT

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference.

2.This device must accept any interference received, including interference that may cause undesired

operation.

Note: This equipment has been tested and found to comply with the limits for a Class A digital device,

pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against

harmful interference when the equipment is operated in a commercial environment. This equipment

generates, uses, and can radiate radio frequency energy, and if it is not installed and used in accordance

with the instruction manual, it may cause harmful interference to radio communications. Operation of this

equipment in a residential area is likely to cause harmful interference, in which case the user will be

required to correct the interference at his own expense.

Modifications: Any modifications made to this device that are not approved by Blackboard Inc. may void

the authority granted to the user by the FCC to operate this equipment.

IMPORTANT NOTE: This equipment complies with the FCC radiation exposure limits set forth for an

uncontrolled environment. End users must follow the specific operating instructions for satisfying RF

exposure compliance. The antenna(s) used for this transmitter must be installed to provide a separation

distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any

other antenna or transmitter.

Contains:

Industry Canada Class A emission compliance statement

This Class A digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada.

FCC ID: 2AFDI-ITCOQ410S Intrinsyc Open-Q 410 System-On-Module

FCC ID: WAP2005 Cypress Semiconductor Bluetooth Low-Energy Module (CYBLE-222014-01)

BLACKBOARD (WR5000) READER INSTALLATION GUIDE

403-003-000 REV A 1-3

This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the

following two conditions: (1) this device may not cause interference, and (2) this device must accept any

interference, including interference that may cause undesired operation of the device.

Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de

licence. L’exploitation est autorisée aux deux conditions suivantes: (1) l’appareil ne doit pas produire de

brouillage, et (2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le

brouillage est susceptible d’en compromettre le fonctionnement.

Contains:

Contient des IC: 9049A-ITCOQ410S and 7922A-2005

Australia and New Zealand Class A statement

Attention: This is a Class A product. In a domestic environment this product may cause radio interference

in which case the user may be required to take adequate measures.

Radiation Exposure Statement

This equipment complies with radiation exposure limits set forth for uncontrolled environment. The

antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm

from all persons and must not be collocated or operating in conjunction with any other antenna or

transmitter.

Déclaration d'exposition aux radiations

Cet appareil se conforme aux limites d'exposition aux rayonnements pour un environnement non contrôlé.

L'antenne (s) qui est utilisé pour cet émetteur doit être installé pour produire une distance de séparation

d'au moins 20 cm de toutes personnes et ne doit pas être installé à proximité ou utilisé en conjonction avec

une autre antenne ou émetteur.

IC: 9049A-ITCOQ410S Intrinsyc Open-Q 410 System-On-Module

IC: 7922A-2005 Cypress Semiconductor Bluetooth Low-Energy Module (CYBLE-222014-01)

HARDWARE KIT AND PARTS LIST

403-003-000 REV A 1-4

HARDWARE KIT AND PARTS LIST

A hardware kit is included with the WR5000. These components are used for wire termination and

installation to a single gang-box.

Figure 1-2 Hardware Kit

Table 1-1: Hardware Parts List

Item Description Use Qty

1 1 x 4m 3,5mm Terminal Block Attach wires to reader. 2

2 M2 x 5 Button-head Socket Cap Screw Secure Reader to mounting plate. 2

3 6-32 x ¾" FH Machine Screw Secure Mounting plate to gang-box. 3

4 Mounting bracket - Old Work Old Work - gang-box tabs on wall surface. 1

5 Mounting bracket - Flush Mount New Work - gang-box is flush with wall. 1

BLACKBOARD (WR5000) READER INSTALLATION GUIDE

403-003-000 REV A 1-5

READER INSTALLATION OVERVIEW

When choosing a location to install the WR5000 reader, consider the following:

• Proximity to entry point

• Visibility and Access to Users

• ADA Requirements

• Protection of the reader from environmental elements

• Cable distance/path:

1200 ft. maximum for RS-485 to Blackboard SA3032

500 ft. maximum for Wiegand interface

328 ft. maximum for Cat-5e cable

Reader Wiring

Based on the application of the reader, the wiring options are as follows:

•Door Reader RS-485 Interface (page 1-5)

•Door Reader Wiegand Interface (page 1-6)

•Attendance Reader (page 1-7)

The hardware kit includes two (1 x 4) terminal blocks. These terminal blocks provide electrical connections

to signals on the pin headers.

Two WR5000 readers can be connected to the Blackboard Access SA3032 to support ingress and egress

configurations. The administrator must login to each reader and set the address. Verify that the readers do

not have the same assigned address (0 or 1).

Note: To maintain UL compliance, install only 1 wire in each terminal block opening. If

necessary, use an external splice when more than one wire is required.

Install in accordance with the National Electrical Code (NEC), ANSI/NFPA 70, and local codes.

Door Reader RS-485 Interface

When using the RS-485 Interface option, only one terminal block is required. The connection points are

shown in Table 1-2. The TB1 designation is for the top four pins shown in Figure 1-3.

READER INSTALLATION OVERVIEW

403-003-000 REV A 1-6

Figure 1-3 Terminal Blocks

The reader must be configured by the administrator to operate in RS-485 mode. In addition to the wiring

shown above, the reader can also be connected to a network using the RJ-45 connector. This provides a

means of getting software updates for the Android OS.

Door Reader Wiegand Interface

When connecting the reader to a Third-party Controller using a Wiegand interface, both terminal blocks are

required. Cable wiring should be a minimum of 24 AWG. If a shielded cable shield is used, ground the

shield at the panel only. Grounding at both ends can cause ground loops which can be disruptive.

For Wiegand Connection Points, see: Table 1-3:.

Table 1-2: RS-485 Connection Points

WR5000

Terminal Block

SA3032 Door

Controller

Signal

Name Description

TB1-1 TB1-1 V+ Power Input +

TB1-2 TB1-2 GND Power Return -

TB1-3 TB1-3 485+ Serial Interface +

TB1-4 TB1-4 485- Serial Interface -

WR5000 Terminal Block Door Controller Terminal Block

BLACKBOARD (WR5000) READER INSTALLATION GUIDE

403-003-000 REV A 1-7

The reader must be configured by the administrator to operate in Wiegand mode. In addition to the wiring

shown above, the reader can also be connected to a network using the RJ-45 connector. This provides a

means of getting software updates for the Android OS.

Attendance Reader

When using the WR5000 as an attendance reader, the device must be connected to a network.

The WR5000 can be powered using an external power supply, or a Power Over Ethernet (POE) switch. If

using an external power supply, the power supply must have a regulated output of +12 Volts DC. If using

POE, a CAT-5 cable must be connected between the POE switch and the RJ-45 connector on the WR5000

(cable length must not exceed 100 meters).

WARNING: When using a POE switch to power the WR5000, both the POE switch and

WR5000 must be installed within the same building or structure.

When using an external supply, wire the reader as shown in Table 1-4:

Table 1-3: Wiegand Connection Points

WR5000

Terminal Block Signal Name Third-Party Controller connections

TB1-1 V+ Connect to regulated Power Supply (+6V to +24V)

TB1-2 GND Connect to Ground

TB1-3 D0/DAT Connect to Wiegand D0 input

TB1-4 D1/CLK Connect to Wiegand D1 input

TB2-1 GLED Connect to Green LED output

TB2-2 RLED Connect to Red LED output

TB2-3 BEEPER Connect to Beeper output

TB2-4 TAMPER Connect to Tamper Input

Table 1-4: Power Supply Wiring

WR5000

Terminal Block Signal Name External Power supply

TB1-1 V+ Connect to regulated Power Supply (+6V to +24V)

TB1-2 GND Connect to Ground

Inhaltsverzeichnis

Beliebte E-Book-Reader Handbücher anderer Marken

Denver

Denver EBO-500 Bedienungsanleitung

Orbit Research

Orbit Research Reader 20 Bedienungsanleitung

Amazon

Amazon Kindle Kindle 1 Bedienungsanleitung

Franklin

Franklin DFC-3015 Bedienungsanleitung

IEI Technology

IEI Technology AFL2-EM-RFID-KIT Bedienungsanleitung

Pocketbook

Pocketbook РВ 903 Bedienungsanleitung

Sony

Sony Reader PRS-T1 Bedienungsanleitung

Sony

Sony 3803775 Bedienungsanleitung

Polaroid

Polaroid PER70Z Bedienungsanleitung

Kobo

Kobo GLO HD Bedienungsanleitung

Onyx International

Onyx International SMART READING Series Bedienungsanleitung

Air Techniques

Air Techniques ScanX ULR01.1A1 Bedienungsanleitung

Aluratek

Aluratek AEBK01FS Bedienungs- und Wartungshandbuch

Cocoon

Cocoon BK7021 Bedienungsanleitung

Yarvik

Yarvik EBR070 GoBook Bedienungsanleitung

Obreey

Obreey Pocketbook 360 Plus Bedienungsanleitung

Franklin

Franklin BOOKMAN NIV-440 Bedienungsanleitung

Icarus

Icarus Sense E651SR Bedienungsanleitung