BlackSys BL-100 Bedienungsanleitung

USER MANUAL
Car DVR of the longest memory storage time
(3 times longer as compared with others)
CAMMSYS
CA D VR R


3
Before Use
Thanks you for choosing Car DVR. We provide customer service through our website.
From our website, www.blacksys.co.kr/en, you can enjoy various online services and benets about our products as
well as latest information. Product Upgrade & Notice : www.blacksys.co.kr/en> customer support> notice
All the gures/pictures shown on this manual are for your understanding and they could be dierent from the actual product. Also,
they are subject to modication without notice.
Specications and functions of the product, stated in this manual, are subject to modication without prior notice for the improvement
of a product.
Information stated in this manual could be varied over SW version and status of the company, and it is subject to modication without
prior notice.
Any of issues arisen from failure of compliance with the manual are not responsibilities of the manufacturer and supplier.
This product may not record all the images due to an environmental condition and/or management of a user. Therefore, it is not
legally assured of the recording of all the data.
For any of damage caused by a defect of the product and/or loss of data, the manufacturer and supplier are not responsible to be
liable.
All the intellectual rights of hardware and software of this product are properties of the manufacturer. Any of illegal copy and distri-
bution could be resulted in indemnication as a civil/criminal oense as well as criminal punishment.
●
●
●
●
●
●
●

4
Before Use
※ For ecient use, please check the following item at least once a week
※ Emergency
For removal of a SD memory card, power must be turned o and then LED must be turned o before the removal of the card.
A SD memory card must be formatted once/twice a month.
A SD memory card should be changed every 6 month in case of connection to permanent power, and 1 year in case of connection to Cigar Jack
(ACC power). (Provided, only an authorized memory card should be used)
A memory card for the Car DVR should be used only for the Car DVR.
After watching the saved image on a smart phone, it must be formatted before use. There could be errors on saving due to automatically generated les.
In case of installing a rear camera →For installing a rear camera, a connection cord should be connected to a main body of the Car DVR and then
a power cord should be connected.
In case of a hybrid vehicle – Please do not connect to permanent power in case of a hybrid car. (electric car)
What would cause malfunctions of the Car DVR?
1 : when a memory card is removed by force while the Car DVR is still on.
2 : when a memory card does not formatted at least once/twice a month.
3 : A dierent e is saved on a memory card. Especially when it does not get formatted after playing the saved video on a smart phone Support
format function on Smart-phone conguration window.
4: In case of warning massage of writing error appeared even if it has been formatted.
In case of no. 1, 2 and 3, format a memory card. In case of no. 4, check a memory adapter Lock switch or exchange a memory.
If the inside temperature is increased to more than 70°C, power of the device would shut o automatically to extend the lifespan and prevent re.
If the temperature drops to the certain level, power would be turned on automatically due to a watchdog function.
We do not recommend of permanent power connection. The manufacturer is not responsible for any of battery discharge, overheating, re and damage on Car
DVR lifespan caused by permanent power connection. For ecient operation of a Car DVR, please check the device at least once a week.
●
●
●
●
●
●
●
●
●
●
●

5
Before Use
How to use a SD memory card
Only a SD card authorized by the manufacturer should be used.
Any of issues caused by unauthorized SD cards would not be reimbursed by the manufacturer.
A SD card is a consumable product, so it should be exchanged regularly.
Only the authorized SD card of the manufacturer should be purchased.
A SD card should be formatted at least once or twice a month.
Before formatting of a SD card, important data must be saved on another device (HDD).
When a formatted SD card is inserted into the product, a save folder would be generated automatically and data would be saved.
A power cord must be disconnected before removing a SD card. If a SD card is removed while power is on, it may damage a memory
card and cannot restore last le.
Before removing a SD card, make sure that LED of the product is completely turned o.
As for this product, a Micro SD card is equipped to be able to view an image with a smart phone directly.
Please do not force to separate a Micro SD card. Such action may damage the card.
In case of permanent power connection, it is recommended to exchange a SD card every half year.
If a SD card does not record anything for ve minutes, there would be alarm on the save error. If you get this alarm during driving,
please check your SD card.
●
●
●
●
●
●
●
●
●
●
●

6
0.CONTENTS
Before Use
1. Caution ……………………………………………………………
2. Preparation
Product Specication ………………………………………………
Product Feature ……………………………………………………
Product Component ………………………………………………
Component Name …………………………………………………
3. Instruction
3-1 Menu ……………………………………………………………
3-2 LED Lamp Status ………………………………………………
3-3 LCD Image Output ……………………………………………
3-4 Format ……………………………………………………………
3-5 Battery Discharge Prevention Function ……………………
3-6 Parking Mode and Motion Detection Function ……………
8
11
12
16
17
18
23
24
25
26
26

7
0.CONTENTS
3-7 Image Storage Device ……………………
3-8 Manual Recording ………………………
3-9 MIC …………………………………………
3-10 Antitheft LED Function …………………
3-11 Firmware Update ………………………
3-12 Memory Storage Period ………………
3-13 How to Use Memory Adapter …………
3-14 Save Folder and File Description ………
3-15 Rear Camera ………………………………
27
27
28
29
29
30
30
31
32
4. Memory Format
Memory Format Sequence ……………
5. Exclusive Viewer Program
Install Player ……………………………
Player Description ………………………
6. Installation
Installation ………………………………
Appendix
Product Warranty
33
36
37
38

8
1. Caution
Caution for the parking motion detection
In case of Normal power connection, a vehicle battery may get discharged if a vehicle is left in negligence for a long
period. In case of leaving a vehicle for a long period, start a vehicle or disconnect power cord for a certain time.
Be careful to operate the Car DVR after leaving a vehicle in a cold/hot place (Proper temperature: - 10~70)
In case of parking a vehicle in a cold/hot place for a long period, it may inuence the normal operation of the
Car DVR. Please operate the Car DVR when it reaches the proper temperature.
Be careful not to have foreign particles inside
If a SD card is lost due to ooding, shock and/or re, images may not be saved.
Never disassemble or remodel the product
In case of Normal power connection, a vehicle battery may get discharged if a vehicle is left in negligence for a long
period. In case of leaving a vehicle for a long period, start a vehicle or disconnect power cord for a certain time.

9
1. Caution
Do not place a metallic product on top
Do not place a metallic product on top of GPS antenna. It may degrade the reception performance.
Satellite reception may take some time
GPS satellite reception after starting a vehicle would take some time, and the required time would be varied
over climate and/or surrounding circumstance.
Stop the operation if there is any malfunction
Stop the operation if there is any malfunction or abnormal condition. Otherwise, it could lead to a serious
problem such as re. Turn o the product immediately and contact the company or A/S center.
Never remove a SD card while it is in operation
Never remove a SD card while the Car DVR is in operation. It may cause malfunction of the product and
damage a SD card.

10
1. Caution
In case of accident or need of recorded images for other necessary, remove the SD card from main
unit and save the data in PC
There is a risk of losing data by overwritten in case of keeping data in memory.
In case of DC Fuse power connection
When connect the permanent power, visiting professional shop is required.
Cammsys do not have responsibility for any accident caused by disassemble of the product.
Inhaltsverzeichnis

















