Blankom HCB 100 Bedienungsanleitung
GmbH
ANTENNENTECHNIK
BLANKOM Antennentechnik GmbH
Hermann - Petersilge - Straße 1 · D-07422 Bad Blankenburg Germany
Phone: ++ 49 (0) 36 74 1 / 60 - 0 · Telefax: ++ 49 (0) 36 74 1 / 60 - 100
www.blankom.de
·
Changes due to technical progress possible!
User - Manual
Headend Controller HCB 100 “blue” (9650.05)
GmbH
ANTENNENTECHNIK
CONTENT
1. Set up of the network connection.............................................................................
1.1 WINDOWS XP .........................................................................................................
1.2 WINDOWS 2000 ......................................................................................................
2. Set up of the Web browser ........................................................................................
2.1 Microsoft Internet Explorer .......................................................................................
3. Working with the Headend Controller (HCB 100)....................................................
3.1 Call up the Headend Controller ...............................................................................
3.2 Selection of the desired Headend overview.............................................................
3.3 Selection of Adjustments and Configurations...........................................................
3.4 IP - configuration of the Headend Controller............................................................
4. Diagram for manual operation/management of the HCB 100 ......................
4.1 Configuration of the HCB 100 ..................................................................................
4.2 Adjustment possibilities of IP - Numbers .................................................................
4.3 General Information for adjustments of the IP - Number .........................................
5. LCD display at the HCB 100 .....................................................................................
5.1 Initializing of the modules after a RESET ................................................................
5.2 Standard Display .....................................................................................................
5.3 Error display, if a module can not be called up ........................................................
6. Changes of the Hardware .........................................................................................
7. Additional Network components .............................................................................
3.5 Basic settings of the Headend Controller ................................................................
3.5.1 Reset of the Headend Controller ....................................................................
3.5.2 Configuration of the Headend Controller .........................................................
3.5.3 Activation of Software Option HCB 100 ...........................................................
3.5.4 Manual start of NIT - distribution .....................................................................
3.5.5 Timer / Time controlled switching ....................................................................
3.5.6 Adjustment of Date/Time .................................................................................
3.5.7 Cold start of individual/single modules ............................................................
3.5.8 Change of User ID, Pass word ........................................................................
3.5.9 Additional NIT - Datas ......................................................................................
3.5.10 Protocol / Log book .........................................................................................
3.5.11 Update of the HEAEND CONTROLLER ..........................................................
3
3
5
7
7
8
8
10
12
13
14
14
14
15
15
16
22
22
23
24
25
26
28
29
29
29
30
30
30
30
31
32
BLANKOM Antennentechnik GmbH
Hermann - Petersilge - Straße 1 · D-07422 Bad Blankenburg Germany
Phone: ++ 49 (0) 36 74 1 / 60 - 0 · Telefax: ++ 49 (0) 36 74 1 / 60 - 100
www.blankom.de
·
GmbH
ANTENNENTECHNIK
1. Set up of the network connection
- Entering via “Start” button of your desktop and then call up “Control Panel”
1.1 WINDOWS XP
Confirm LAN - connection
with douple click
(continue at page 4)
3
BLANKOM Antennentechnik GmbH
Hermann - Petersilge - Straße 1 · D-07422 Bad Blankenburg Germany
Phone: ++ 49 (0) 36 74 1 / 60 - 0 · Telefax: ++ 49 (0) 36 74 1 / 60 - 100
www.blankom.de
·
GmbH
ANTENNENTECHNIK
TCP/IP Protocol
installed
TCP/IP Protocol
not installed
Select Protocol (TCP/IP) and then press OK
4
Select “Use the following IP address”!!!
NOTICE
- Enter a valid IP - Address and Subnet mask.
- The IP - Address of the PC/Laptop has to be different
( ) of the IP - Address of the
HCB 100.
- The Subnet mask can be entered as shown in the
above example.
NO entries for “Gateway”, “DNS” ... are necessary.
Least Significant Bit
BLANKOM Antennentechnik GmbH
Hermann - Petersilge - Straße 1 · D-07422 Bad Blankenburg Germany
Phone: ++ 49 (0) 36 74 1 / 60 - 0 · Telefax: ++ 49 (0) 36 74 1 / 60 - 100
www.blankom.de
·
GmbH
ANTENNENTECHNIK
1.2 WINDOWS 2000
5
- Entering via “Start” button of your desktop and then call up “Control Panel”
Confirm LAN - connection
with douple click
(continue at page 6)
BLANKOM Antennentechnik GmbH
Hermann - Petersilge - Straße 1 · D-07422 Bad Blankenburg Germany
Phone: ++ 49 (0) 36 74 1 / 60 - 0 · Telefax: ++ 49 (0) 36 74 1 / 60 - 100
www.blankom.de
·
GmbH
ANTENNENTECHNIK
TCP/IP Protocol
installed
TCP/IP Protocol
NOT installed
6
Select “Use the following IP address”!!!
NOTICE
- Enter a valid IP - Address and Subnet mask.
- The IP - Address of the PC/Laptop has to be different
( ) of the IP - Address of the
HCB 100.
- The Subnet mask can be entered as shown in the
above example.
NO entries for “Gateway”, “DNS” ...necessary.
Least Significant Bit
Select Protocol (TCP/IP) and then press OK
BLANKOM Antennentechnik GmbH
Hermann - Petersilge - Straße 1 · D-07422 Bad Blankenburg Germany
Phone: ++ 49 (0) 36 74 1 / 60 - 0 · Telefax: ++ 49 (0) 36 74 1 / 60 - 100
www.blankom.de
·
GmbH
ANTENNENTECHNIK
2. Set up of the Webbrowser
- Open the Webbrowser (MS Internet Explorer), select “Tools” and then “Internet Options ...”
Select “Every visit to the page” !!!
Notice
To avoid display errors please change the
adjustments for the storing of temporary
Internet files.
Press “General” and “Settings” Press “Connections”
Select “Never dial a
connection”
Please disconnect the access to a Proxyserver
for direct connection of the HCB 100 with
PC/Laptop.
2.1 Microsoft Internet Explorer
Please restart the PC/Laptop after all settings/adjustments are finished.
Then the connection to the Headend Controller HCB 100 can be called up via the Webbrowser.
7
BLANKOM Antennentechnik GmbH
Hermann - Petersilge - Straße 1 · D-07422 Bad Blankenburg Germany
Phone: ++ 49 (0) 36 74 1 / 60 - 0 · Telefax: ++ 49 (0) 36 74 1 / 60 - 100
www.blankom.de
·
GmbH
ANTENNENTECHNIK
Enter the IP - Number into the address - line.
(IP - Number ex works BLANKOM is always: 192.168.2.80)
The Login - window of the HCB 100 will be displayed if all adjustments/settings are correct.
You now can save/secure the operation via a password.
Selecting the configuration “Automatic Login” allows Login without password entry (see 3.5.2).
3. Working with the Headend Controller HCB 100
3.1 Access to the Headend Controller
8
GmbH
ANTENNENTECHNIK
Enter USER ID and Password
User ID.......0000
Password....0000
USER ID and Password ex works BLANKOM:
Writing protection has been deleted.
You will be automatically forwarded to the
“Selcetion - Menu”.
Selection of desired Headend overview table
(see 3.2)
Selection of Adjustments and Configurations
(see 3.3)
9
BLANKOM Antennentechnik GmbH
Hermann - Petersilge - Straße 1 · D-07422 Bad Blankenburg Germany
Phone: ++ 49 (0) 36 74 1 / 60 - 0 · Telefax: ++ 49 (0) 36 74 1 / 60 - 100
www.blankom.de
·
GmbH
ANTENNENTECHNIK
3.2 Selection of the desired Headend overview table
Headend overview (LIST)
The Headend overview (List) displays all the modules of the
entire Headend system as a List.
Selecting the button “Edit” gets you to the operation overview
of the respective module.
The Headend overview (Matrix) displays all the modules of the entire Headend system as a Matrix
Selecting the button “Edit” gets you to the operation overview of the respective module.
.
- The first line (horizontaly / here 02 and 03) displays the line-addresses of the Power supply (BEB 100).
- The fist line (verticaly / here 01 - 07) displays the addresses of the individual modules, as well as
additional information like the module type, the synchronisation (SYNC) for digital converters, channel
name(s), respective output band and -frequencies...
Headend overview table (Matrix)
10
BLANKOM Antennentechnik GmbH
Hermann - Petersilge - Straße 1 · D-07422 Bad Blankenburg Germany
Phone: ++ 49 (0) 36 74 1 / 60 - 0 · Telefax: ++ 49 (0) 36 74 1 / 60 - 100
www.blankom.de
·
Andere Handbücher für HCB 100
1
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
Andere Blankom Controller Handbücher
