Blaupunkt P1PM2T2 Bedienungsanleitung

EV Portable Charger

User Manual

Please read this instruction carefully

before using the product.

CONTENTS

ENGLISH

INHALTSVERZEICHNIS

DEUTSCH

CONTENU

FRANÇAISE

INHOUD

NEDERLANDS

SPIS TREŚCI

POLSKI

INNEHÅLL

SVENSK

INDICE

ITALIANO

ÍNDICE

PORTOGHESE

CONTENIDOS

ESPAÑOL

INDHOLDSFORTEGNELSE

DANSK/NORSK

SISÄLTÖ

SUOMALAINEN

Language

0110

3140

6170

91100

1120

4150

7180

101110

2130

5160

8190

ContentsEnglish

Introduction to the Portable EV Charger ( Mode 2 ) 02

Explanation of the operating display and technical parameters 03

Display Light Status 08

Explanation of the " " and " " symbol 05

Use of the charger - start charging

Use of the charger - stop charging

Switch Current

Timer function

English

EV Portable Charger

Please carefully read the following instructions before charging your

Electrical Vehicle, be aware of the hazards involved with electrical circuity

and standard practices for preventing accidents.

Use 06

Function 09

Introduction to the Portable EV Charger ( Mode 2 )

CAUTION

· Use the power source with external upstream Circuit Breaker.

Make sure the charger is used in a safe, secure place and well out of the reach of young children or pets.

·Please use the charger in a dry, well ventilated and secure place. Keep weel out of reach of young

children or pets. Avoid water pouring directly onto the power plug.

· Do not open the enclosure while charging or with the power on.

· Do not maliciously damage the product.

Introduction to the Portable EV Charger ( Mode 2 )

Speciﬁcations

P1PM2T2

P1PM2T1

P1PM2T2C

P3PM2T2

P1PM2T2BS

P1PM2T1BS

Single-phase

Three-phase

Single-phase

Model Power Supply

Type

Cable Total

Length

200-250V

380-450V

200~250V

Voltage

8/10/13/16A

8/10/13A

Current Connector

Type

Explanation of the operating display and technical parameters

405V

Power light

Charge lamp

Trouble lamp

Current switch button

Charging time

Temperature

PE Detection

(Earthing Detection)

405V Voltage

Power

Rated current

Constant current

Electricity consumption

Time function button

The upstream PE has not

been detected and the

charging cannot be started.

Explapation of the operating display

Technical Parameters

Dimensions (L ×W × H)

Weight

Protection Degree ( Control box )

OperatingTemperature

260 × 100 × 72.5 mm

3Phase: 3.35 kg

IP65

-30°C to +50°C

1Model: P3PM2T2

Explanation of the operating display and technical parameters

245V

Power light

Charge lamp

Trouble lamp

Current switch button

Charging time

Temperature

245V Voltage

Power

Rated current

Constant current

Electricity consumption

Time function button

The upstream PE has not

been detected and the

charging cannot be started.

Explapation of the operating display

Technical Parameters

Dimensions (L ×W × H)

Weight

Protection Degree ( Control box )

OperatingTemperature

260 × 100 × 72.5 mm

1Phase: 2.65 kg

IP65

-30°C to +50°C

1Model: P1PM2T2 / P1PM2T1 / P1PM2T2C / P1PM2T2BS / P1PM2T1BS

PE Detection

(Earthing Detection)

Users must check the PE detection mark " " on the display before each use.

(PE meaning protective conductor)

1.If the Mark " " is displayed on the screen, it indicates that the charger shall verify

the presence of the upstream PE, and the charging process will only begin when

the upstream PE is present.

2.If the Mark " " is NOT displayed on the screen, it indicates that the charger has

no function to verify the presence of the upstream PE, and can be charged

whether or not the PE can be detected.

ATTENTION: It is strongly recommended that users charge under condition 1.

Condition 2 has certain security risks due to the absence of PE. So Condition 2

should only be used under the premise that users can ensure safety and in

special circumstances where PE does not exist in the power system.

Deactivate PE Detection : Press“Amps+Time”for 4s together.

Reactivate PE Detection: Press“Amps+Time”for 4s together.

ATTENTION: if the mark " " appears, it means that the upstream PE has not been

detected and the charging cannot be started.

Explanation of the " " and " " symbol

Use of the charger - start charging

Start Charging

Step

Illustration Operation

Insert the plug into the correct

power supply socket.

Remove the protective cap

and fully insert the charging

connector into the EV

charging port.

Start charging

AMPS TIME

ChargingTime：00:00:03

℃

229V0.89kw

0.002kwh

16A3.9A

Do not use product if it appears to be damaged or the cable is broken.

Do not disassemble or assemble the connector and change the internal parts

Do not clean the products using chemicals or cleaning the EV car while charging.

DANGER

Stop Charging

Step Illustration Operation

Close the protective shell of EV

charging port,then cover the

protective cap of the charging

connector.

Use of the charger - stop charging

Disconnect the plug from the

power supply socket.

Put the portable charger into

the bag.

Disconnect the charging

connector from the EV car.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Sprachen:

Andere Blaupunkt Akkuladegerät Handbücher

Blaupunkt

Blaupunkt BP38 Bedienungsanleitung

Blaupunkt

Blaupunkt WCM3KB15FMITXPD Bedienungsanleitung

Blaupunkt

Blaupunkt BLP1900PB.COMP Bedienungsanleitung

Blaupunkt

Blaupunkt SMART CHARGER 170 Bedienungsanleitung

Blaupunkt

Blaupunkt Cube Bedienungsanleitung

Blaupunkt

Blaupunkt BLP0219 Bedienungsanleitung

Blaupunkt

Blaupunkt LGA 754011 Bedienungsanleitung

Blaupunkt

Blaupunkt BLP7310 Bedienungsanleitung

Blaupunkt

Blaupunkt BLP7050-001 Bedienungsanleitung

Blaupunkt

Blaupunkt BLP7030 Bedienungsanleitung

Blaupunkt

Blaupunkt BLP7450 Bedienungsanleitung

Blaupunkt

Blaupunkt BLP0233-001 Bedienungsanleitung

Blaupunkt

Blaupunkt BLP0232-001 Bedienungsanleitung

Beliebte Akkuladegerät Handbücher anderer Marken

AA Portable Power Corp

AA Portable Power Corp Universal Smart Charger Bedienungsanleitung

Enelion

Enelion Vertica Bedienungsanleitung

RCA

RCA CHU6 Bedienungsanleitung

ANSMANN

ANSMANN ALCT 6/24-10 Bedienungsanleitung

Hitachi

Hitachi UC 18YRSL Fehlerbehebungshandbuch

Olympus

Olympus B-20 LPC Bedienungsanleitung

Exibel

Exibel ZH1708143 Bedienungsanleitung

Lenmar

Lenmar Mach 1 Bedienungsanleitung

CTEK

CTEK MXS 5.0 Bedienungsanleitung

ABB

ABB HT842379 Bedienungsanleitung

Nitecore

Nitecore Superb Charger SC4 Bedienungsanleitung

Renogy

Renogy RBC2125DS-21W Bedienungsanleitung

Braun

Braun BWC02M Bedienungsanleitung

CTEK

CTEK MXS 3.6 Bedienungsanleitung

Black & Decker

Black & Decker BDV090 Bedienungsanleitung

Trinity

Trinity DPD Bedienungsanleitung

Hulkman

Hulkman Sigma 1 Bedienungsanleitung

IKEA

IKEA koppla Bedienungsanleitung