Blaupunkt M18 Bedienungsanleitung
BPIN Private Limited
47, Atlanta Society, Nariman Point, Mumbai ‐ 400 021. Maharashtra. India.
Toll Free: 1800 209 6820 | info@blaupunktcar.in | Shop Online at www.blaupunktcar.in
M18 Car Ambient Light
CABIN LED LIGHT
M18 Car Ambient Light
Multicolour Mood Lighting For Cars
Illumination Sync:
If this feature is turned ON, the ambient light kit syncs with the status of the main
headlights of the vehicle provided the Orange lead is connected to the Illumination
lead of the vehicle.
Intelligent Voice Control: (Limited to dream colour version): This allows the Ambient
light kit to be controlled by voice
Rhythm Sensitivity:
With this option the sensitivity of the ambient light can be adjusted to match the
rhythm of the music (0 being the least sensitive and 7 being the most sensitive)
Flashing Speed:
Set the frequency at which the ambient light ashes (1 being the slowest and 10 being
the fastest)
Theme selection:
Choose different themes from the app
Reset (Limited to dream colour version): Restore factory settings
Control box pre-set:
The app can automatically identify the correct version of the ambient light kit - full
colour or dream colour. Should the auto identication fail, please select the correct
version manually.
2. Features & specications:
ŸPower Consumption:10-30W
ŸControl box Input / Output Voltage: 12V/5V
ŸLED light strip voltage: 5V
ŸLight Color: 64 colours
ŸApplication: Car Cabin Interior Mood Light Colour
ŸFunction: Ambient Light with APP Control via BT
ŸDurability: More than 5000 hours
ŸVarious mood light setting options
ŸWireless connectivity between main control module & door control modules
ŸUniversal application - suitable for all cars with +12V supply
3. Installation Diagram
Connection description of main controller
1. Product introduction:
Thank You for choosing Blaupunkt Car Ambient LED Light System.
This manual will help familiarize you with the various features of the Ambient LED light
system. Please read it carefully before installation and use.
M18 Car Ambient Light M18 Car Ambient Light
01. Main controller & related accessories 02. Side door controllers & related
accessories
03. Door Handle light & related accessories 04. Foot Well Lights & related
accessories
05. Side door storage cavity light 06. LED light strip for doors
07. LED light strip for dashboard
Note: Dashboard light strip can be cut to match it’s width. Please connect the cut end to 07
connector.
Important: DO NOT connect to 07 connect if no changes are made to the Dashboard Light
Strip.
Foot Well Light
Wired remote control
To foot light cable
To car ILL (Orange)
Main controller
Main controller cable
To extension cable
LED light strip for dashboard
To ACC
+12V (Red)
GND (Black)
4. Turn off the dashboard light strip: long press 2 seconds
5. Turn on the dashboard light strip: long press 2 seconds
6. Main-Sub controller box pair: in OFF state, long press for 10 seconds
Here are some tips:
01. If the Main Controller works and the subsidiary Controllers do not turn ON
(suitable for one box or all subsidiary controllers), it is recommended to try manual
pairing
02. Manual pairing process takes about 5 seconds, during which the ambient lights
will ash in white.
03. If the pairing is successful, all the lights will be red. If pairing fails, all lights will be
blue.
04. If manual pairing fails once, please try again.
05. If there are two or more cars installed with the same ambient light kit in close
proximity there could be an issue of interference between them and to prevent this
it is recommended to follow below instructions:
a. After completing the installation and pairing for a particular vehicle, do not
turn off the vehicle power and keep the ambient light in ON mode before
proceeding to the next vehicle.
b. After completing the installation and pairing of one vehicle completely
disconnect the positive and negative terminals of the car battery or disconnect
the power connections of the main and subsidiary controllers , and then pair the
next car
c. Keep the two vehicles approximately 40 meters apart.
06. This kit has auto-pairing function, which means the main and subsidiary
controllers will pair automatically when they are powered ON. If the main controller
and all the subsidiary boxes pair normally and appear to be working properly, there
is no need to manually pair them.
Brightness adjustment button (S):
This button is to adjust the brightness of the ambient light kit, there are 10 brightness
level selection options with 0 being for lowest brightness, and 10 for brightest.
5. APP Menu Operation
Connection steps:
1) Please download and install the "M18 LED" APP on your smart phone from iOS or
PlayStore
2) Bluetooth connection steps:
Please use your smartphone to search for the name of the Bluetooth device starting
with "Blaupunkt M18", to pair and connect with it.
Click “Settings”®"Bluetooth search”® Select ®" Blaupunkt M18"®”Connected"
Connection description of side door controller
4. Remote control operation
Mode button(M):
Functions:
1. Start: short press
2. Turn off: long press
3. Mode switch: after starting, short press;
Equipped to provide preset patterns for the following loops:
RED ® Yellow ® Green ® Cyan ® Blue ® Violet ® White ® Automatic (64 Colors) ®
Breathing (Colorful gradual change) ® Burst ash (Colorful burst change) ® Cheerful
Rhythm ® Soothing Rhythm ® Red loop
M18 Car Ambient Light M18 Car Ambient Light
Side door controller
To power 12V {Yellow)
GND (Black)
Side door controller cabel
To door storage case light
To door knob light
To door strip light
Step 1 Step 2 Step 3
M18 Car Ambient Light M18 Car Ambient Light
Step 4: Connection successful
Set interface
1. Ambient light switch: Here you can turn ON or
OFF the ambient light kit with your phone via the
APP
2. Full Colour: You can set the ambient light
working mode you want. Refer below for each
mode function introduction:
Single colour: in this mode, go to "Colour" to
select any single colour you choose. In "Colour",
other than the 7 preset single colours, you can
add any other colour you wish as new presets.
Automatic: in this mode, the light colour will
change among preset 64 colours gradually.
Breathing: in this mode, you can choose from 7
different colour presets for breathing ashing
effect.
Burst ash: in this mode, you can choose from 8
different colour presets for fast and sharp
ashing effect.
Music rhythm Sync-in this mode, the light will
ash fast and according to any music or voice
played in the car (the music can be from a phone
or car audio system).
Soothing rhythm: in this mode, the light will
ash slowly and softly according to any music or
voice played in the car(the music can be from a phone or car audio system).
Note: You can go to Settings ® Rhythm sensitivity to adjust the response level to
music/voice volume
3. Brightness: Here you can set the ambient light brightness level (1 being minimum
brightness & 100 being maximum brightness)
Uniform brightness: Uniform control of the brightness of all lights
Strip lights: Control the brightness of the dashboard light strip & side door light strip
respectively
Other lights: Control the brightness of the door handle lights, side door storage pocket
lights and the footwell lights respectively
Colour interface (in single colour mode)
Uniform color: Uniformly set the colours of all lights
Strip lights: Set the colour of the dashboard light
strip & side door light strip respectively
Other lights: Set the colour of the door knob light,
the side door storage case light and the footwell
light respectively
Area 1:
Please select any colour on the colour wheel (64
colors)
Area 2:
Select from any of the 7 prese colours, click on the
corresponding colour to display it on the ambient
light kit
Area 3:
1. Post selecting any colour in the colour circle of
area 1, click the " “ button to save this colour in area 3
2, Click on different custom saved colours to switch
3. To delete a colour from the Custom Colour select
the particular colour and click Delete
M18 Car Ambient Light M18 Car Ambient Light
Clear the paired conguration Pairing succeeded
Congure Subsidiary Controllers:
To congure the main & the subsidiary controllers manually, please follow below steps:
“Subsidiary control box conguring” ® ”Clear subsidiary controllers box” ® “Congured
subsidiary control box”
If it displays “congure success” that indicates pairing is complete
5. Setting Interface
Inhaltsverzeichnis
Andere Blaupunkt Beleuchtungsausrüstung Handbücher
Beliebte Beleuchtungsausrüstung Handbücher anderer Marken
Qazqa
Qazqa Suplux SL 3 Black 103062 Bedienungsanleitung
Commercial Electric
Commercial Electric 54568141 Bedienungsanleitung
CREE LIGHTING
CREE LIGHTING 304 Series Bedienungsanleitung
Goobay
Goobay 49867 Bedienungsanleitung
ECOMAN ITALIA
ECOMAN ITALIA LED T8 Bedienungsanleitung
Alkalite
Alkalite Krypton KT-81 Bedienungsanleitung
