Blaupunkt Q SERIES Betriebsanleitung

Manual

Q-Serie:

Smart Home Alarm

Enjoy it.

IP-Alarm System

Smart Home Alarm

Installation and operation of the Blaupunkt Q-Series

Blaupunkt Competence Center Security

Table of Contents

1. Introduction and registration 4

1.1 Preparation 4

1.2 Registration 4

1.3 Handling error massages during registration 5

1.4 Conrmation of registration and log-in 5

2. Extension of the security system 6

3. Assembly and planning of the security system 7

3.1 Kit Content Installation 7

3.2 General instructions for installation 9

3.3 Before mounting: walk test 9

3.4 Tamper protection 9

3.5 Positioning of the individual elements 9

3.6 Mounting Devices 10

4. Operation of the Internet portal 12

4.1 Security 12

4.1.1 Sensors 12

4.1.2 System Modes 13

4.1.3 IP cameras 13

4.2 Automation 14

4.2.1 Device 14

4.2.2 Group 15

4.2.3 Scene 16

4.2.3.1 Create a scenario 17

4.2.3.2 Examples of scenarios 18

4.2.3.3 Delete a Scene 20

4.2.4 Rule 21

4.2.4.1 Create a Rule 21

4.2.4.2 Edit a rule 23

4.2.4.3 Delete a Rule 24

4.2.4.4 Examples of rules 25

4.3 Live-Video 26

4.4 Event 26

4.5 Settings 27

4.6 Device Settings 27

4.6.1 Setting the devices 27

4.6.2 Walk-Test 29

4.6.3 Update device list 30

4.6.4 Remove device 30

4.6.5 Add device 30

4.7 Panel Setting 31

4.7.1 General Settings 31

4.7.2 Away and Home Arm Settings 32

4.7.3 Panel Settings 32

4.7.4 Master Code Setting 33

4.7.5 Sirene Setting 33

4.7.6 PIN Code Setting 34

4.7.7 Time Setting 34

4.8 Report Setting 35

4.9 Account 38

4.9.10 Service and Payment 42

5. Operation of the mobile app Secure4Home 43

5.1 Log In 43

5.2 Security 44

5.3 Device 44

5.4 Home Automation 45

5.5 Cam 47

5.6 Event 48

5.7 Account 49

6. Troubleshooting and Reset to default settings 51

6.1 Q-Hub 51

6.2 Motion detector 52

6.3 Door/ Window Sensor 53

6.4 Reset/ Reboot 53

7. Specications 54

8. Declaration of conformity 55

NOTE:

Information and illustrations are subject to chage within the document. Blaupunkt reserves the right to alter the

speciﬁcation and product design at any time without notice.

Support:

For more information on panel and devices, please visit: www.blaupunkt.com/service

Firmware Upgade Service:

The Q-Hub includes a free FW upgrade service. (There is a daily FW upgrade service which keeps your device up-to date.). If

you bought a new Q-Series product you should wait at least one working day so all the necessary updates are ready. If the

device is updating please don’t turn it oﬀ since it could harm the system.

Blaupunkt Competence Center Home Security

1. Introduction and registration

These instruction is intended to help you with the installation and operation of your Blaupunkt Q Series

Smart Home Alarm System. You can download the Secure4Home app for free from the Apple Store or

Google Play.

IMPORTANT:

Be sure to read the quick start guide that comes with the kit. It contains important information and helps to get the system

up and running quickly.

NOTE:

The system has to be connected to Ethernet and

electricity at all times. Any problem with the router

and the connection to the network and power may

disturb the operation of the system.

1.1 Preparation

Place in a suitable location (close to your Internet router

and electricity outlet, hidden from potential intruders).

To open the Webportal visit https://eu.bphomeconnect.

com from your browser and click “New User”. Avoid using

Microsoft IE Explorer/ Edge.

Step 1:

Connect the Q Hub to

the Internet router with

the included Ethernet

cable. Position the Q

Hub at least 1 Meter

away from the router.

Step 2:

Connect Q Hub to

an electricity outlet

with the included AC

Adapter. Flip the power

switch to ON.

Step 3:

Wait until the Power

LED lights up.

1.2 Registration

For Registration, please continue following the instructions on screen

and enter the required information. You will then be asked to enter

the MAC address of your Q3000/Q3200 system, which you will ﬁnd

on the back of the panel. Please enter the last 6 digits of the MAC

address.

NOTE:

As soon as the Q-Hub is connected and switched on, the server gives you 15 minutes in order to complete the regis-

tration. If the registration is not completed within 15 minutes, please remove the AC Adapter and move the switch to

the OFF position. Then restart by reinserting the AC Adapter and switching to ON. You now have 15 more minutes to

complete the registration.

Blaupunkt Competence Center Home Security

1.3 Handling error massages during registration

1.4 Conrmation of registration and log-in

If you receive an error message during or after registration, it may be due to one of the following reasons:

Server connection error: The Q-Hub can´t connect to the Home Portal Server. The Q-Hub is either

switched o or there are problems with the internet connection. Please check the power supply and net-

work status.

• If the Q-Hub is detected as a malware or virus, please check your ﬁrewall settings. Port TCP 5222 must be

open and added to the ﬁrewall exception list.

• Check the setting of the MAC address ﬁlter. The MAC address of your Q-Hub must be enabled in your

router.

• If you are using a dial-up Internet connection, your router must support the ADSL PPPoE function.

Registration time expired: As soon as the Q-Hub is connected and switched on, the server gives you 15

minutes in order to complete the registration. If the registration is not completed within 15 minutes, please

remove the AC Adapter and move the switch to the OFF position. Then restart by reinserting the AC Adapt-

er and switching to ON. You now have 15 more minutes to complete the registration.

Error with MAC address: Each MAC address can only be registered once. Otherwise, an error message will

be displayed. If you are the owner of the Q-Hub and have not previously registered this Q-Hub, please contact

Blaupunkt Support.

NOTE:

The Internet portal works best using the Firefox browser. Using LTE routers and powerline adapters can cause problems.

Once the registration process is complete the server will send a conﬁrmation e-mail to your registered e-mail

address. Follow the link on the e-mail and log in to the server. To do this, enter the registered username and the

registered password. Registration is now complete. If you do not receive a conﬁrmation e-mail, please check

your spam folder.

Blaupunkt Competence Center Home Security

2. Extension of the security system

You can improve the performance of your alarm system by adding additional sensors or detectors (see

gure bellow ).

These include further motion detectors or door / window sensors to enlarge the protected area. Remote con-

trols are also helpful for convenient operation. Hazard detectors, such as smoke detectors, increase your protec-

tion against ﬁre, gas and water hazards. For a better security, an extra indoor or outdoor siren would allow you

to mute and hide the alarm panel siren making it impossible to ﬁnd your security system. With a temperature

sensor, you can comfortably measure and regulate the temperatures in your rooms. Additional wireless inter-

mediate plugs (PSM-S1) enable modern smart home functionality, e.g. the regulation of the electric and heating

systems.

Informations about more sensors and detectors can be found at www.blaupunkt.com

Door Contact

(White/Brown) DC-S1

Motion Detector

IR-S1 / IRP-S1*

Glassbreak Sensor

SVGS-S2

Key Pad KP-R1/

KPT-R1 with Tags

PIR-Sensor with

Camera IRC-S2

IP System

Camera IPC-S1

Outdoor Siren

BX-S1

Indoor Power-Plug

Siren SRAC-S1

Smoke Detector

SD-S1

Carbon Monoxide

Detector CO-S2

Heat Detector

HD-S1

Water Sensor

WS-S1

Radiator Thermostat

TRV-S1

Smart System

Thermostat TMST-S1

5in1 Multi Detector

MD-S1

Smart Power Meter

Switch PSM-S1

Power Meter Relay

Switch PRM2-S1

Roller Shutter

Relay SCM-S1

Security

Hazard

Alert

Smart Home

Blaupunkt Competence Center Home Security

3. Assembly and planning of the security system

IMPORTANT:

Before you install the devices, you should ﬁrst register the system in the Blaupunkt Home Portal at

https://eu.bphomeconnect.com/.

3.1 Kit Content Installation

Panel

System mode-LED (Green/Red):

Green ON – Disarm Mode

Green ﬂashes – Learning Mode

Red ON – Arm Away Mode

Red ﬂashes – Home Arm Mode

OFF – Walk Test

Status-LED (Amber /Red):

Amber ON – System Error

Amber ﬂashes – Power Outage

Red ﬂashes – System Alarm

Red ON – Alarm Memory

OFF – Normal Operation

Network-LED (Amber):

Amber ON – Network Error

OFF – Normal Operation

Learn/Reset-Button:

Used for learning new devices

or resetting panel to default settings.

NOTE: Please conduct a Walk Test while holding the devices at the planned location previous to installing your devices (chapter

4.6.2. Walk Test).All of the devices included in the Q3000/ Q3200 Starter Kit are already pre-linked to the Q Hub and do not need

to be learned manually.

Door Contact (Q3000 Kit/Q3200 Kit)

(DC-S1) (Fig.1)

The door / window sensors (DC-S1) guarantee optimal

control of possible access to your home. This ensures

that thieves do not go unnoticed in the house.

The sensor sends an alert when the door or window is

opened triggering an alarm. Additionally the built-in

tamper protects the sensor from any unauthorized

removal, sabotage or unsteady installation.

It features a 4 years long battery life to reduce

maintenance costs and hassles. Additionally, it has low

battery detection to inform when the battery is nearly

to be depleted.

The LED serves as a fault and test mode indicator.

The Magnet has to be placed next to the Sensor

marker! Max 15mm

Fig.1

LED-Display

Test-/Learn-

Button

Tamper protection

Sensor

marker

Magnet

Mode

LED

Status

LED

Network

LED Learn/Reset

Button Battery

Switch

DC Jack

Ethernet

Port

Blaupunkt Competence Center Home Security

Motion Detector (Q3000 Kit)

(IR-S1L)(Fig. 2)

The Motion Detector (IR S1L) detects moving heat

masses in its detection ﬁeld with a great reliability

against false alarms. Ensures the detection in large

spaces with reliability thanks to the wide detection

range of up to 12 meters in length and its “vision” of

110 °.

The infrared sensor triggers an alarm when an intruder

is detected. Additionally the built-in tamper protects

the sensor from any unauthorized removal, sabotage

or unsteady installation.

Features a 5 years long battery life to reduce

maintenance costs and hassles. Additionally it has low

battery detection to inform when the battery is nearly

to be depleted.

The LED serves as a fault and test mode indicator.

LED/Walk Test/

Learn Button

PIR-Sensor

Fig.2

NOTE: The IR-S1L has a 1min sleep mode when the

alarm is deactivated. Please wait more than 2 minutes

without detecting anyone to be sure the device its out of

sleep mode before testing.

Motion Detector with camera (Q3200 Kit)

(IRC-S2) (Fig. 3)

The Motion Detector with camera (IRC-S2) detects

moving heat masses in its detection ﬁeld with a great

reliability against false alarms. Ensures the detection

in large spaces with reliability thanks to the wide

detection range of up to 12 meters in length and its

“vision” of 110 °.

The infrared sensor triggers an alarm when an intruder

is detected, takes 3 pictures and sends them to the

user. You can also request a picture at any time using

the App or the Web Portal. Additionally the built-in

tamper protects the sensor from any unauthorized

removal, sabotage or unsteady installation.

NOTE: The IRC-S2 has a 2min sleep mode when the

alarm is deactivated. Please wait more than 2 minutes

without detecting anyone to be sure the device its out

of sleep mode before testing.

NOTE: The Q-Series is compatible with rolling

code. A new feature to encrypt and make the

system even more secure.

Blue LED/Test-/Learn-Button

LED-Flash

PIR-Sensor

Lense of PIR-

Camera Fig.3

Fig.4

LED-Display

Arm Away-Button Arm Home-Button

Emergency-

Button

Disarm-Button Battery Cover

Remote-Control (Q3200 KIT) (RC-R3B) (Fig.4)

With the RC-R3B you can operate your Blaupunkt

security system comfortably. By pressing the buttons,

it’s possible to change the system arm mode and

trigger an emergency alarm.

For a increased security the RC-R3B has encrypted

rolling code feature.

It features a 2 years battery life to reduce maintenance

costs and hassles. Additionally it has low battery

detection to inform when the battery is nearly to be

depleted. The LED serves as a fault and test mode

indicator.

Blaupunkt Competence Center Home Security

3.2 General instructions for installation

Do not mount the Q-Hub and sensors near larger metal or electrical interference sources such as a refrigerator

or microwave oven, as these may aﬀect signal strength. Also, the building material used plays a major role, the

signal strength is signiﬁcantly lower in a wall of bricks than a wooden wall. Devices equipped with a sabotage

contact must be mounted on a ﬂat surface so that the sabotage contact is completely pressed in when mount-

ing.

3.3 Before mounting: walk test

All sensors, detectors and accessories communicate with the Q-Hub via RF or ZigBee. This saves you the trou-

ble of connecting the devices to the control panel via cable. All sensors of the Q-Hub have a wireless range of

approx. 30 m in a typical domestic environment. Before you mount the devices ﬁrmly, test the radio signal of the

device at the installation site. How to carry out the walk test can be found in chapter 4.6.2.

3.4 Tamper protection

Sensors that protect you from intruders, such as motion detectors and door / window sensors, are protected

against unauthorized manipulation by a sabotage contact. This sabotage contact is triggered when the device

is removed from its mounting location or the cover is forcibly opened. When the sabotage contact is triggered,

the sensor sends a signal to the Q-Hub. The user then knows that the sensor has either not been properly

mounted or manipulated. For the sabotage contact to function properly, it must be fully pressed after

attaching the sensor.

DC 9V

LEARN

Wireless Door / Window Sensor

• Mount the main body of the

detector on the door/window

frame, and the magnet on the door/

window. Installation point should

be as high as possible.

• For optimal performance do not

mount on metallic surface

• Do not point a motion detector

directly at a door or window

contact.

Q-Hub

• The Q-Hub should be set up so

that it is not visible from the outside.

• It must be connected to your

router via Ethernet.

Motion Detector

• For optimal performance intall

the PIR at 1.9-2m height. When

mounted at a height of 2 m, the

motion detector has a range of 12

• The motion detector is most

eﬀective when the burglar moves

across the ﬁeld of view. Therefore,

it should not be placed so that

it points directly to a potential

burglar.

• Do not expose the motion

detector to direct sunlight, this

may aﬀect detection sensitivity.

•Avoid mounting PIR near large

metal objects

• Do not point the PIR sensor

at window, or heat sources

directly, such as stove, boilers

or radiators.

3.5 Positioning of the individual elements

Blaupunkt Competence Center Home Security

3.6 Mounting Devices

Mounting the Motion Detector (Q3000 Kit) (IR-S1L)

The IR-S1L is ﬁxed to the wall with screws or double adhesive tape. The best location is on a corner. The IR-S1L

has a total of six mounting knock-outs where the plastic is thinner. The 2 central knock-outs are for ﬂat wall

mounting, and the four side knock-outs are for corner mounting. For optimal performance intall the PIR at 1.9-

2m height.

1.Remove the IR-S1L back cover and locate the mounting knock-outs.

2.Break through the knock-outs and use the knock-outs to mark the position on the wall or corner.

3.Drill holes into the wall or corner using the knock-outs as template.

4.Fix the IR-S1L back cover onto the wall with the screws and plugs provided.

5.Place the IR-S1L again onto the back cover. Make sure that the tamper protection is pushed down, other-

wise the tamper will be triggered.

Corner Fixing

Knock-outs x4

Surface Fixing

Knock-outs x 2

(Inside)

Mounting the Door Contact (Q3000 Kit/Q3200 Kit) (DC-S1)

The DC-S1 is ﬁxed to the door or window frame with screws or double adhesive tape. The DC-S1 has two

knock-outs on the inside of the back cover where plastic is thinner.

The DC-S1 should be mounted on the door/window frame, while the magnet should be mounted on the door/

window as shown in the picture below. The gap between the Door Contact and the magnet should be no more

than 15 mm.

1.Remove the DC-S1 back cover and locate the mounting knock-outs.

2.Break through the knock-outs and use the knock-outs to mark the position on the door/window frame.

3.Drill holes into the door/window frame using the knock-outs as template.

4.Fix the DC-S1 back cover onto the door/window frame with the screws and plugs provided.

5.Place the DC-S1 cover again onto the base. Make sure that the tamper protection is pushed down, other-

wise the tamper will be triggered.

6.Repeat the same process for the magnet. The magnet should be installed adjacently at the sensor marker.

Andere Handbücher für Q SERIES

Inhaltsverzeichnis

Andere Blaupunkt Sprecher Handbücher

Blaupunkt

Blaupunkt PA Series Bedienungsanleitung

Blaupunkt

Blaupunkt PCb 1200 Double Bedienungsanleitung

Blaupunkt

Blaupunkt BT01 Bedienungsanleitung

Blaupunkt

Blaupunkt BLP3200 Bedienungsanleitung

Blaupunkt

Blaupunkt BT12 Bedienungsanleitung

Blaupunkt

Blaupunkt Blue Magic Series Bedienungsanleitung

Blaupunkt

Blaupunkt GT 217X Bedienungsanleitung

Blaupunkt

Blaupunkt BLP3795-001 Bedienungsanleitung

Blaupunkt

Blaupunkt BPS004BTS Bedienungsanleitung

Blaupunkt

Blaupunkt BT07LED Bedienungsanleitung

Blaupunkt

Blaupunkt IC 170 Marine Dual Cone Bedienungsanleitung

Blaupunkt

Blaupunkt BT03 Bedienungsanleitung

Blaupunkt

Blaupunkt BLP3360 Bedienungsanleitung

Blaupunkt

Blaupunkt BLP3610 Bedienungsanleitung

Blaupunkt

Blaupunkt BT08LED Bedienungsanleitung

Blaupunkt

Blaupunkt BT02WH Bedienungsanleitung

Blaupunkt

Blaupunkt LS 230e Bedienungsanleitung

Blaupunkt

Blaupunkt BLP3020 Bedienungsanleitung

Blaupunkt

Blaupunkt MB06 Bedienungsanleitung

Blaupunkt

Blaupunkt BT11ALU Bedienungsanleitung

Blaupunkt

Blaupunkt BT06 Bedienungsanleitung

Blaupunkt

Blaupunkt BT05 Bedienungsanleitung

Blaupunkt

Blaupunkt VRX 200 Bedienungsanleitung

Blaupunkt

Blaupunkt THx 693 Bedienungsanleitung

Beliebte Sprecher Handbücher anderer Marken

argon audio

argon audio IE20 Bedienungsanleitung

Denon

Denon SC-N7 Bedienungsanleitung

Gemline

Gemline Ace 3952 Bedienungsanleitung

Focal

Focal ON WALL 300 Bedienungsanleitung

HEADRUSH

HEADRUSH Maximus HRSP 5024 Bedienungsanleitung

SoundLogic

SoundLogic BCCS-6/6395 Bedienungsanleitung

Peavey

Peavey DTH 218 Bedienungsanleitung

Avantree

Avantree Pluto Air Bedienungsanleitung

Morel

Morel Integra Series INTEGRA OVATION 4 Bedienungsanleitung

Oppo

Oppo SONICA Bedienungsanleitung

Bose

Bose SoundLink Wireless Music System Bedienungsanleitung

Rocksteady

Rocksteady Stadium Bedienungsanleitung

Bowers & Wilkins

Bowers & Wilkins 4 Bedienungsanleitung

Sonance

Sonance SONOS OUTDOOR Series Bedienungsanleitung

Electro-Voice

Electro-Voice EVID FM4.2 Bedienungsanleitung

Pioneer

Pioneer XW-HTD630 Bedienungsanleitung

Onn

Onn BWA16AA002 Bedienungsanleitung

HP GL313AA - USB Speakers PC Multimedia Bedienungsanleitung