Blizzard Lighting Stiletto Beast Bedienungsanleitung

Blizzard Lighting, LLC

www.blizzardlighting.com

Waukesha, WI USA

Page 2

TABLE OF CONTENTS

Stiletto™ Beast Moving Head 1

1. Getting Started 3

What’s In The Box? 3

Getting It Out Of The Box 3

Powering Up! 3

Getting A Hold Of Us 3

Safety Instructions (Don’t Stick Your Hand In The Toaster!) 4

2. Meet The Stiletto™ Beast 5

Main Features 5

DMX Quick Reference 5

The Stiletto™ Beast Pin-up Picture 6

3. Setup 7

Fuse Replacement 7

Connecting A Bunch Of Stiletto™ Beast Fixtures 7

Data/DMX Cables 7

Cable Connectors 8

3-Pin??? 5-Pin??? Huh? 8

Take It To The Next Level: Setting up DMX Control 8

Installation 9

4. Operating Adjustments 10

The Control Panel 10

Control Panel Menu Structure 11

DMX Mode 12

Set the Starting DMX Address 12

Select the DMX Channel Mode 12

DMX512 and Art-Net Mode 12

Slave Mode 12

Auto Mode 12

Sound Active Mode 12

Static Mode 12

Calibration Settings 12

Test Mode 13

Fan Control 13

DMX Fail Setting 13

 MenuShutOTimer     13

Flip Display 13

Menu Key Lock 13

Display Flash 13

Pan/Tilt Reverse 13

Encode Settings 13

Factory Reset 13

DMX Values In-Depth 14

 LEDIdentication      16

5. Appendix 17

A Quick DMX Lesson 17

Dimensions 17

Keeping Your Stiletto™ Beast As Good As New 18

Returns (Gasp!) 18

Shipping Issues 18

Tech Specs 19

Page 3

1. GETTING STARTED

What’s In The Box?

• 1 x Stiletto Beast™

• An Ever-So-Handy Power Cord

• 1 x Set of Mounting Brackets

• This Lovely User Manual

Getting It Out Of The Box

Congratulations on your purchase of the Stiletto Beast™, the wonderfully ferocious, mon-

strous LED moving head! Now that you’ve got your Stiletto Beast™ (or hopefully Beasts)

you should carefully unpack the box and check the contents to ensure that all parts are

present and in good condition. If anything looks as if it has been damaged in transit, no-

tify the shipper immediately and keep the packing material for inspection. Again, please

savethecartonandallpackingmaterials.Ifaxturemustbereturnedtothefactory,itis

importantthatthexturebereturnedintheoriginalfactoryboxandpacking.

Powering Up!

Allxturesmustbepowereddirectlyoaswitchedcircuitandcannot be run o a

rheostat (variable resistor) or dimmer circuit, even if the rheostat or dimmer

channel is used solely for a 0% to 100% switch.

AC Voltage Switch -Notallxtureshaveavoltageselectswitch,sopleaseverifythatthe

xtureyoureceiveissuitableforyourlocalpowersupply.Seethelabelonthextureor

refertothexture’sspecicationschartformoreinformation.Axture’slistedcurrent

ratingisitsaveragecurrentdrawundernormalconditions.Checkthextureordevice

carefully to make sure that if a voltage selection switch exists that it is set to the correct

line voltage you will use.

Warning! Verify that the voltage select switch on your unit matches the line

voltage applied. Damage to your xture may result if the line voltage applied does

not match the voltage indicated on the voltage selector switch. All xtures must

be connected to circuits with a suitable Ground (Earthing).

Getting A Hold Of Us

If something is wrong, please just visit our website at www.blizzardlighting.com/

support and open a support ticket. We’ll be happy to help, honest.

Disclaimer:Theinformationandspecicationscontainedinthisdocumentaresubject

to change without notice. Blizzard Lighting™ assumes no responsibility or liability for any

errors or omissions that may appear in this user manual. Blizzard Lighting™ reserves the

right to update the existing document or to create a new document to correct any errors

or omissions at any time. You can download the latest version of this document from www.

blizzardlighting.com.

Author: Date: Last Edited: Date:

J. Thomas 9/29/2016 J. Thomas 9/30/2016

Page 4

SAFETY INSTRUCTIONS

• Please keep this User Guide for future use. If you sell the unit to someone

else, be sure that they also receive this User Guide.

• ALWAYS make sure that you are connecting to the proper voltage, and that

the line voltage you are connecting to is not higher than that stated on the de-

calorrearpanelofthexture.

• This product is intended for indoor use only.

•Topreventriskofreorshock,donotexposexturetorainormoisture.

•Makesuretherearenoammablematerialsclosetotheunitwhileoperating.

• The unit must be installed in a location with adequate ventilation, at least

20in(50cm)fromadjacentsurfaces.Besurethatnoventilationslotsare

blocked.

• ALWAYS disconnect from the power source before servicing or replacing fuse

and be sure to replace with same fuse size and type.

•ALWAYSsecurextureusingasafetychain.NEVERcarrythexturebyits

head. Use its carrying handles.

• DO NOT operate at ambient temperatures higher than 104°F (40°C).

• In the event of a serious operating problem, stop using the unit immediately.

NEVER try to repair the unit by yourself. Repairs carried out by unskilled people

can lead to damage or malfunction. Please contact the nearest authorized tech-

nical assistance center. Always use the same type spare parts.

• NEVER connect the device to a dimmer pack.

• Make sure the power cord is never crimped or damaged.

• Never disconnect the power cord by pulling or tugging on the cord.

• Avoid direct eye exposure to the light source while it is on.

Caution! There are no user serviceable parts inside the unit. Do not

open the housing or attempt any repairs yourself. In the unlikely event

your unit may require service, please open a support ticket at www.

blizzardlighting.com/support.

Page 5

2. MEET THE STILETTO BEAST™

MAIN FEATURES

• 7* high output 60W RGBW 4-in-1 LEDs

• Pan: 540°/ Tilt: 200° (8-16 bit resolution)

•Innitebidirectionalrotatinglens

•IndividuallycontrollableLEDs+shapeandbackgroundeects

•Multi-beameectswithzoomable4-50°beamangle

• 2500-10000K Linear CTO

• LED drive current: 4500mA

• User selectable 32-bit dimming modes

• Art-NET (DMX over Ethernet) support

•0-20Hzstrobewithpulseandrandomstrobeeects

• 3/5-pin male/female XLR and RJ45 input and outputs

• PowerCon™ compatible AC power In/Out connectors

CONTROL:

• Protocol: USITT DMX-512, Art-NET

• DMX Channels: 26/45/54

• 2.4 inch TFT color LCD display panel with 4x touch sensitive buttons

• Operating Modes: standalone, master/slave, auto, sound active

DMX Quick Reference (26/45/54-Channel Modes)

CH. Standard (26ch) CH. Extended RGBW(45ch) CH. Extended (54ch)

1 Red (0-100%) 1 Red (0-100%) 1 Red (0-100%)

2 Green (0-100%) 2 Green (0-100%) 2 Green (0-100%)

3 Blue (0-100%) 3 Blue (0-100%) 3 Blue (0-100%)

4 White (0-100%) 4 White (0-100%) 4 White (0-100%)

5 Linear CTO 5 Linear CTO 5 Linear CTO

6 Macro Color 6 Macro Color 6 Macro Color

7 Strobe 7 Strobe 7 Strobe

8 Dimmer 8 Dimmer 8 Dimmer

9 Pan (0-540°) 9 Pan (0-540°) 9 Pan (0-540°)

10 Fine Pan (16-bit) 10 Fine Pan (16-bit) 10 Fine Pan (16-bit)

11 Tilt (0-200°) 11 Tilt (0-200°) 11 Tilt (0-200°)

12 Fine Tilt (16-bit) 12 Fine Tilt (16-bit) 12 Fine Tilt (16-bit)

13 Pan & Tilt Speed 13 Pan & Tilt Speed 13 Pan & Tilt Speed

14 32-Bit Dimming 14 32-Bit Dimming 14 32-Bit Dimming

15 Reset 15 Reset 15 Reset

16 Zoom (4-50°) 16 Zoom (4-50°) 16 Zoom (4-50°)

17 Lens Rotation 17 Lens Rotation 17 Lens Rotation

18 Shape Selection 18 LED 1 Red (0-255) 18 Shape Selection

19 Shape Speed 19 LED 1 Green (0-255) 19 Shape Speed

20 Shape Fade 20 LED 1 Blue (0-255) 20 Shape Fade

21 Shape Red 21 LED 1 White (0-255) 21 Shape Red

22 Shape Green 22 LED 2 Red (0-255) 22 Shape Green

23 Shape Blue 23 LED 2 Green (0-255) 23 Shape Blue

24 Shape White 24 LED 2 Blue (0-255) 24 Shape White

25 Shape Dimmer 25 LED 2 White (0-255) 25 Shape Dimmer

26 Background Dimmer 26 LED 3 Red (0-255) 26 Background Dimmer

-- -- 27 LED 3 Green (0-255) 27 LED 1 Red (0-255)

-- -- 28 LED 3 Blue (0-255) 28 LED 1 Green (0-255)

-- -- 29 LED 3 White (0-255) 29 LED 1 Blue (0-255)

-- -- 30 LED 4 Red (0-255) 30 LED 1 White (0-255)

-- -- 31 LED 4 Green (0-255) 31 LED 2 Red (0-255)

-- -- 32 LED 4 Blue (0-255) 32 LED 2 Green (0-255)

-- -- 33 LED 4 White (0-255) 33 LED 2 Blue (0-255)

-- -- 34 LED 5 Red (0-255) 34 LED 2 White (0-255)

-- -- 35 LED 5 Green (0-255) -- --

-- -- 36 LED 5 Blue (0-255) 35-49 LEDs 3-5 R/G/B/W

-- -- 37 LED 5 White (0-255) -- --

-- -- 38 LED 6 Red (0-255) 50 LED 6 Red (0-255)

-- -- 39 LED 6 Green (0-255) 50 LED 6 Green (0-255)

-- -- 40 LED 6 Blue (0-255) 50 LED 6 Blue (0-255)

-- -- 41 LED 6 White (0-255) 50 LED 6 White (0-255)

-- -- 42 LED 7 Red (0-255) 51 LED 7 Red (0-255)

-- -- 43 LED 7 Green (0-255) 52 LED 7 Green (0-255)

-- -- 44 LED 7 Blue (0-255) 53 LED 7 Blue (0-255)

-- -- 45 LED 7 White (0-255) 54 LED 7 White (0-255)

Page 6

Figure 1: Stiletto Beast™ Pin-Up Picture

7* High

Output

60W RGBW

4-in-1 LEDs

Carry

Handle

Figure 2: The Rear Connections

Innitely

Rotatable &

Zoomable

Lens with

4-50°

Beam Angle

Power

Input

5-Pin

DMX Out

RJ45

Output

Power

Output

Power

Switch

Fuse

Holder

3-Pin

DMX Out

5-Pin

DMX In

3-Pin

DMX In

RJ45

Input

Head/Arms

4-Button

Control Panel

with 2.4" TFT

Color Display

Page 7

3. SETUP

Fuse Replacement

Remove the fuse holder from of its housing. Then take out the dam-

aged fuse from its holder and replace with exact same type of fuse.

Reattach the fuse holder, and then reconnect power.

Connecting A Bunch of Stiletto™ Beast Fixtures

You will need a serial data link to run light shows using a DMX-512

controllerortorunshowsontwoormorexturessettosyncinmas-

ter/slave operating mode. The combined number of channels required

byallthexturesonaserialdatalinkdeterminesthenumberofx-

tures the data link can support.

Fixtures on a serial data link must be daisy chained in one single line.

Also,connectingmorethan32xturesononeserialdatalinkwithout

the use of a DMX optically-isolated splitter may result in deterioration

of the digital DMX signal. The maximum recommended cable-run dis-

tance is 500 meters (1640 ft). The maximum recommended number

ofxturesonaserialdatalinkis32xtures.

Data/DMX Cabling

Tolinkxturestogetheryou’llneeddatacables.Youshouldusedata-

grade cables that can carry a high quality signal and are less prone to

electromagnetic interference.

Forinstance,Belden©9841meetsthespecicationsforEIARS-485

applications. Standard microphone cables will “probably” be OK, but

note that they cannot transmit DMX data as reliably over long distanc-

es. In any event, the cable should have the following characteristics:

2-conductor twisted pair plus a shield

Maximum capacitance between conductors – 30 pF/ft.

Maximum capacitance between conductor & shield – 55 pF/ft.

Maximum resistance of 20 ohms / 1000 ft.

Nominal impedance 100 – 140 ohms

Page 8

Cable Connectors

Cables must have a male XLR connector on one end and a female XLR connec-

tor on the other end. (Duh!)

CAUTION: Do not allow contact between the common and the

xture’schassisground.Groundingthecommoncancauseaground

loop,andyourxturemayperformerratically.Testcableswithan

ohm meter to verify correct polarity and to make sure the pins are not

grounded or shorted to the shield or each other.

3-Pin??? 5-Pin??? Huh?!?

If you use a controller with a 5-pin DMX output connector, it’s no problem! you can simply use the in-

stalled5-pinDMXinputand/oroutputconnectionsfoundonthebackofyourxture(s).

Conductor 3-Pin Female (Output) 5-Pin Male (Input)

Ground/Shield Pin 1 Pin 1

Data 1- (Primary Data Link) Pin 2 Pin 2

Data 1+ (Primary Data Link) Pin 3 Pin 3

Data 2- (Optional Secondary Data Link) Pin 4 Pin 4

Data 2+ (Optional Secondary Data Link) Pin 5 Pin 5

Take It To The Next Level: Setting Up DMX Control

Step 1: Connect the male connector of the DMX cable to the female connector (output) on

the controller.

Step 2: Connect the female connector of the

DMXcabletotherstxture’smaleconnector

(input). Note: It doesn’t matter which

xtureaddressistherstoneconnected.We

recommendconnectingthexturesinterms

of their proximity to the controller, rather than

connectingthelowestxturenumberrst,and

so on.

Step 3:Connectotherxturesinthechain

from output to input as above. Place a DMX

terminatorontheoutputofthenalxtureto

ensure best communication.

Page 9

Installation

Thexturecanbeinstalledontheoorrestingonitsrubberfeet,ormounted

on truss.

●Chooseasuitableplacetoputorhangtheequipmentwheninstalling.When

hangingthexture,usetheincludedclampmountingbracketswithsuitable

clampstoproperlysupporttheweightofthexture.

●Wheninstallingtheequipment,ensurethatnoammableorexplosivemateri-

als are within 1/2 meter distance.

●Pleaseaskprofessionalstoinstalltheequipment.Anyimproperinstallation

cancausepersonalinjuryormaterialdamage.

●Theequipmentmustbeplacedinaventilatedarea,atleast50cmfromthe

ground, and always ensure that the vents are not clogged.

●Mountthextureusingsuitabletypeclamps.Theclampshouldberated

toholdatleast10xthexture’sweighttoensurestructuralstability.Donot

mount to surfaces with unknown strength, and ensure properly “rated” rigging

isusedwhenmountingxturesoverhead.

WARNING:Withtheexceptionofwhenthextureispositionedon

theoor,asafetycablemustalwaysbeused.Itmustbesecurelyxed

tothesupportstructureoftheprojectorandthenconnectedtothex-

ing point at the center of the base.

Page 10

4. OPERATING ADJUSTMENTS

The Control Panel

AllthegoodiesanddierentmodespossiblewiththeStiletto™Beast

areaccessedbyusingthecontrolpanelonthefrontofthexture.

There are 4 control buttons to the right of the LCD display which allow

you to navigate through the various control panel menus.

<MENU>

Is used to navigate to the previous higher-level menu item.

<ENTER>

Isusedtoselectandconrm/storethecurrentselection.

<UP>

Scrolls through menu items and numbers in ascending order.

<DOWN>

Scrolls through menu items and numbers in descending order.

The control panel display shows the menu items you select from the

menu map on page #11. When a menu function is selected, the dis-

playwillshowimmediatelytherstavailableoptionfortheselected

menu function. To select a menu item, press <ENTER>.

Use the <UP> and <DOWN> buttons to navigate the menu options.

Press the <ENTER> button to select the menu function currently dis-

played, or to enable a menu option. To return to the previous option or

menu without changing the value, press the <MENU> button.

Press <ENTER> to Menu

Dmx Artnet

Inhaltsverzeichnis

Andere Blizzard Lighting Projektor Handbücher

Blizzard Lighting

Blizzard Lighting ProPar I7 Bedienungsanleitung

Blizzard Lighting

Blizzard Lighting UVONIX BLACKSTAR Bedienungsanleitung

Beliebte Projektor Handbücher anderer Marken

iEmmet

iEmmet MP-312 Bedienungsanleitung

Epson

Epson VS400 Bedienungsanleitung

Sony

Sony VPL-HS10 Marketing Specifications & Features Bedienungsanleitung

Sony

Sony VPL-HW65ES Service-Handbuch

Toshiba

Toshiba TLP-791U Bedienungsanleitung

Philips

Philips LC1341 Referenzhandbuch

Panasonic

Panasonic PTL735NTU - LCD PROJECTOR-NETWORK IB Bedienungsanleitung

NEC

NEC NP600S EDU Bedienungsanleitung

BenQ

BenQ SH753P Bedienungsanleitung

Eiki

Eiki EK-623U series Bedienungsanleitung

Epson

Epson PowerLite Pro Cinema 6020UB Bedienungsanleitung

Epson

Epson PowerLite Home Cinema 705HD Bedienungsanleitung

Christie

Christie LHD700 Bedienungsanleitung

Navitar

Navitar FX Bedienungsanleitung

InFocus

InFocus LitePro 560 Bedienungsanleitung

Sony

Sony SRX-R815P Bedienungsanleitung

Vivitar

Vivitar DP1500 X Bedienungsanleitung

Acer

Acer C20 Series Bedienungsanleitung