Blodgett MT3255G Bedienungsanleitung
BLODGETT OVEN COMPANY
www.blodgett.com
44 Lakeside Avenue, Burlington, VT 05402 • Phone: (802) 658-6600 • Fax: (802) 864-0183
EXTERIOR CONSTRUCTION
Stainless steel front, top and sides
Aluminized steel back and bottom
Side loading glass door and handle
1-1/2" (38.1mm) Vitreous fiber insulation at bottom, back and top
Ceramic fiber insulation at blower installation and front control panel
INTERIOR CONSTRUCTION
Aluminized steel nozzles and bottom surface
Aluminized steel air flow plates at top
32" (813mm) stainless steel wire mesh conveyor belt
Three single inlet blowers above the combustion area for air circulation
OPERATION
Heat transferred through forced convection/impingement
Open vented baking compartment
Electronic spark ignition control system
Gas power type burner has mixer with adjustable shutter and sight window
Internal gas pressure regulator
Solid state 600°F (315.5°C) maximum thermostat and belt speed control with
digital display
Three blower motors (1/3 HP minimum) with thermal overload protectors
Four blower area cooling fans
Two control area cooling fans
STANDARD FEATURES
Control: Solid state front mounted
Belt direction: (must specify)
left to right right to left
Product stops
Oven start-up
One year parts & labor warranty*
* For all international markets, contact your local distributor.
OPTIONS AND ACCESSORIES
(AT ADDITIONAL CHARGE)
Legs/casters:
17-1/4" (438mm) black legs with casters
23-1/4" (591mm) black legs with casters
Triple stack base with casters
Shelf extension:
15" (381mm)
20" (508mm)
Flexible gas hose with quick disconnect and
restraining device:
36" (914mm)
48" (1219mm)
Note: Two 48" (1219mm) and one 36" (914mm)
hose on triple model
Twin belt - two 16" (406mm) wide belts
10' (3.0M) cord with receptacle
Stacking rail
One year additional extended warranty
MODEL MT3255G
Gas Conveyor Oven
MT3255G
Project
Item No.
Quantity
Blodgett conveyor oven with 32" (813mm) wide belt and 55" (1397mm)
baking zone length. Single, double or triple stack models are available.
All data is shown per oven section, unless otherwise indicated.
BLODGETT OVEN COMPANY
www.blodgett.com
44 Lakeside Avenue, Burlington, VT 05402 • Phone: (802) 658-6600 • Fax: (802) 864-0183
MODEL MT3255G
SHORT FORM SPECIFICATIONS
Provide Blodgett Conveyor Oven model MT3255G conveyor oven. Unit shall be gas fired and shall cook by means of forced, heated air/impingement. Unit shall be (single/double/triple)
deck supported by (specify stand type from options list) . Each deck shall be fully independent, of stainless steel construction, and fully insulated on all sides. Provide with electronic
spark ignition gas fired baking compartment with three blowers to evenly distribute heat across baking zone. Conveyor belt shall be 32" (815mm) wide and constructed of stainless steel
wire mesh; baking zone length shall be 55" (1395mm). Unit shall be provided with stainless steel side loading door fitted with tempered glass view port. Front mounted control panel
shall be solid state with 600°F (315.5°C) maximum thermostat and digital display of adjustable belt speed. Provide start-up inspection service by a factory authorized service agent.
Provide options and accessories as indicated.
DIMENSIONS:
Floor space 62" (1575mm) W x 91" (2311mm) L
Product clearance 3.5" (90mm)
Combustible wall clearance 2" (50mm)
Belt width
Standard belt 32" (815mm)
Optional twin belt 16" (405mm) each
Baking zone length 55" (1395mm)
GAS SUPPLY: (specify) Natural Propane
Single 3/4" NPT 3/4" NPT
Double stack 1" NPT 3/4" NPT
Triple stack 1-1/4" NPT 1" NPT
MAXIMUM INPUT:
Single 125,000 BTU/hr
Double 250,000 BTU/hr
Triple 375,000 BTU/hr
Minimum Gas Pressure: 4.5" W.C. for natural gas
11.0" W.C. for propane gas
Maximum Gas Pressure: 10.5" W.C. for natural gas
13" W.C. for propane gas
POWER SUPPLY:
Domestic Model:
120/208-240 VAC, 1 Phase, 60 Hz., 7 amp, 3 wire with
Ground
Export Model:
220-240, 1 phase, 50 Hz., 7 amp, 2 wire with Ground
MINIMUM ENTRY CLEARANCE:
Uncrated 24.2" (615mm)
Crated 32" (813mm)
SHIPPING INFORMATION:
Approx. Weight: Crated Uncrated
Single 1120 lbs. (510 kg) 1021 lbs. (463 kg)
Double 2930 lbs. (1060 kg) 2042 lbs. (926 kg)
Triple 3600 lbs. (1640 kg) 3063 lbs. (1389 kg)
Crate sizes:
32" (813mm) x 70" ( 1778mm) x 105" (2667mm)
Printed in U.S.A. NOTE: FOR COMMERCIAL USE ONLY
NOTE: The company reserves the right to make substitu-
tions of components without prior notice
TOP VIEW
*58” (1473mm) without false front
91” (2310mm)
55” (1395mm)
18”
(455mm)
GAS
INPUT
32”
(815mm)
61”*
(1550mm)
END VIEW
3.5” (90mm)
PRODUCT CLEARANCE
3/4” NPT
GAS INPUT
48” (1219mm)
or 36” (914mm)
flexible gas hose available
SIDE VIEW
0” (0mm)
23.5” (595mm)
36.5” (925mm)
47.7” (1210mm)
0” (0mm)
17.5” (445mm)
SIDE VIEW
30.5” (775mm)
41.7” (1060mm)
54.5” (1385mm)
66” (1675mm)
SIDE VIEW 0” (0mm)
1.7” (45mm)
14.7” (375mm)
26” (660mm)
39” (990mm)
50” (1275mm)
63” (1600mm)
74.3” (1885mm
APPROVAL/STAMP
P/N M9993 Rev F (6/01)
Andere Handbücher für MT3255G
1
Inhaltsverzeichnis
Andere Blodgett Ofen Handbücher
Blodgett
Blodgett 1200 Series Anwendungshandbuch
Blodgett
Blodgett COS-8E Bedienungsanleitung
Blodgett
Blodgett 1048 Technisches Dokument
Blodgett
Blodgett 951 Base Bedienungsanleitung
Blodgett
Blodgett COMBI B-142G Bedienungs- und Sicherheitshinweise
Blodgett
Blodgett BG3240 Bedienungsanleitung
Blodgett
Blodgett Hydrovection HVH-100E Betriebsanleitung
Blodgett
Blodgett BCX-14 Bedienungsanleitung
Blodgett
Blodgett 961 Bedienungsanleitung
Blodgett
Blodgett BG2136 Double Betriebsanleitung
Blodgett
Blodgett MG3270 Anleitung zur Verwendung
Blodgett
Blodgett BG3240 Bedienungsanleitung
Blodgett
Blodgett 901 Double Betriebsanleitung
Blodgett
Blodgett MT1828 Series Bedienungsanleitung
Blodgett
Blodgett MT2136 Series Installations- und Betriebsanleitung
Blodgett
Blodgett DFG-100 Series Bedienungsanleitung
Blodgett
Blodgett COS-6 Bedienungsanleitung
Blodgett
Blodgett 966 Bedienungsanleitung
Blodgett
Blodgett 1400 SERIES Leitfaden
Blodgett
Blodgett BE2136 DOUBLE Betriebsanleitung
