Blue Seal SMW 15 Technisches Datenblatt
Instructions for use and maintenance
Ed. 10/2003
SMW 15
2
SMW 15
3
SMW 15
DISHWASHING MACHINE
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
The illustrations concerning these instructions are on the
inside of the back cover
cod. 36427
Mod.
SMW 15
4
SMW 15
GBR IMPORTANT
Becomethoroughlyfamiliarwiththecontentsofthimanualbeforeinstalling,settingup,adjustingandservicingdiswashermachine
Mod. SMW 15 .
Only contact an authorized technical center or BLUE SEAL in the event of breakdowns or faulty machine operation.
5
SMW 15
INDEX
Important............................................................. pag. 4
Overall dimensions............................................ pag. 6
Technical data.................................................... pag. 6/7
Decription of the controls. ................................ pag. 8
ENGLISH. ............................................................ Page 9
6
SMW 15
OVERALL DIMENSIONS
SMW 15 35 l 8,5 l 2÷4 bar. Ø 3/4"G. 4 l 60/120/180 s 500 x 600 mm
Tank capacity
Mains supply of water
Water consumption cycle
Cycle lenght
Basket dimensions
Boiler capacity
Baskets output p/h
Total power
Boiler heating element
Tank heating element
Wash pump
Electric supply
SMW 15 60/30/20 400V3 N~50Hz 7620 W 6000 W 3000 W 1620 W (2,2 Hp)
TECHNICAL DATA
Model
ABCD E F G
620 735 1230 1325 500 540 145 ÷180
A
B
D
E
F
G
SMW 15
7
SMW 15
Environmetal humidity min/max
Wash temperature
Drain pipe fitting
Gross weight
Net weight
Environmetal temperature min/max.
SMW 15 Ø 31 mm 115 kg 130 kg 5°÷40°C 20 ÷90 % 50°÷60°C
Rinse temperature
Noise level
SMW 15 80°÷90°C < 70 dB (A)
8
SMW 15
KEY
1) Line selector
2) Mains warning light
3) Temperature reached warning light
4) Washing time selector
5) START/DRAIN button
6) Cycle light
7) Tank thermometer
DESCRIPTION OF CONTROLS
•Line selector (1)
Turned on position “I” ON, this enables normal machine
operatio;turnedtoposition“0”OFF,itdisablesallmachine
functions.
Drain condition in automatic (optional)
(only on machines with drain pump)
It works only during rinsing water inlet.
Drain condition in manual (optional)
See page 19 point 3.3.e.
•Mains warning light (2)
When on, indicates that the power source is connected.
•“Temperature reached” warning light (3)
Flashed whilst the water in the tub is being heated.
Remains permanently on once the set temperature has
been reached.
•Washing time selector (4)
Turned to the various positions, this is used to set the
programmed washing time.
•Start /Drain button (5)
When pressed, this activates the normal washing cycle.
The light (6) goes out once the cycle ha s terminated.
•Cycle light (6)
When on, indicates that the cycle is operating.
•Tank thermometer (7)
Indicated the temperature of the water in the washing
tank.
GBR
CONTROL PANEL
30
20 40 50 60
10
°C
7
START
1
34
56
2
9
SMW 15
PARTICULAR RECOMMENDATIONS
FOR THE OPERATOR
-Do not operate the machine without having become fully
familiar with the contents of this manual and without having
acquired a comprehensive knowledge of the specific
techniques and machine controls.
-Checkthattheareainwhichthemachineistobeinstalledis
compatible with the dimensions of the machine itself before
installing this latter.
-Only use lifting and handling means as are adequate to the
weightofthemachinewhenthismustbeinstalledorremoved
either completely or in part.
-Never allow unauthorized or unqualified personnel to start,
adjust, operate or repair the machine. Always refer to this
manual for the necessary operations.
-The mechanical parts and electrical/electronic components
situated inside the machine are protected by entirely closed
panels.
-Always ensure that the main switch has been set to the
“OFF”positionbeforecleaningand/orservicingthemachine
and before removing any guard. This will disconnect the
power source during the operator’s intervention.
-The electrical powering system must be equipped with an
automatic release system prior to the main machine switch
and with a suitable grounding system that complies with all
the requisites established by industrial provisions for the
prevention of accidents.
-Always disconnect the power source if work must be carried
out on the main switch or in its vicinity.
-Allinspectionsandmaintenanceoperationsrequiringremoval
of the safety guards are carried out under the complete
responsibility of the users.
These operations should therefore only be carried out by
specialized and authorized technical personnel.
-Check that none of the accident preventing safety devices
(barriers, guards, casings, microswitches, etc.) have been
tamperedwithandthattheyareallperfectlyfunctionalbefore
operating.Thesedevicesshouldberepairedifthisisnotthe
case.
-Never remove the safety devices.
-To prevent personal risks, only use power tools that are
correctlyconnectedto thegroundingtap andthatconformto
the national safety regulations.
-Neverevertamperwiththeelectricalsystemorwithanyother
mechanism.
-Never ever use the hands or unsuitable instruments to
locateleaksfrompipes.Air,fluidsunderpressureor irritants
couldcauseseriousdamagetobothpersonsand/orproperty.
-Neverusethehandsinsteadofadequatetoolswhenoperating
the machine.
-Never use the hands or other objects to stop moving parts.
-PAY THE UTMOST ATTENTION TO THE DATA PLATES
AFFIXED TO THE MACHINE WHENEVER WORKING ON
THIS OR ON THEIR NEAR VICINITY.
-Theuserisobligedtokeepallthedataplatesandstickersin
a legible condition.
-It is essential for the user to replace all data plates and
stickersasmayhavedeterioratedforanyreasonorasarenot
clearlyvisible,orderingnewonesfromtheSparesServiceof
BLUE SEAL.
-Contact the person in charge of maintenance in the event of
malfunctionsordamagetothemachinecomponentswithout
proceeding with further repairs.
-It is absolutely forbidden for anyone to use the machine for
purposes other than those explicitly established and
documented.Themachinemustalwaysbeusedintheways,
times and places established by common sense, the laws in
forceineachnation,evenwhentherearenospecificprovisions
to govern the sector in the specific country of use.
-BLUE SEAL declines all responsibility for accidents or
damage to either persons or propertry as may arise
followingfailureto complywitheither therelativesafety
provisions or the instructions herein.
-These instructions, together with the provisions
governing machine installation and electrical
connections form an integral part of the Accident
Preventing Industrial regulations in force in each
individual country.
-THESESAFETYPROVISIONSINTEGRATEANDDONOT
SUBSTITUTE THE SAFETY PROVISIONS LOCALLY IN
FORCE.
-NEVERevermakehurriedorinaccuraterepairsascould
jeopardize the correct operation of the machine.
-ALWAYS ASK FOR HELP FROM SPECIALIZED
PERSONNEL IN CASE OF DOUBT.
-ANY TAMPERING BY THE USER RELIEVES THE
MANUFACTURER FROM ALL LIABILITY, THE USER
BEINGINTHISCASESOLELYRESPONSIBLETOWARDS
THE COMPETENT ACCIDENT PREVENTION
AUTHORITIES.
ENGLISH
10
SMW 15
1.1 GENERAL DESCRIPTION
The dishwasher of the SMW 15 give an excellent idea of
theknow-howachievedbyBlueSealinthefieldofmachines
for catering sector.
1.2 TYPE OF USE AND IMPROPER USE
These machines have been designed and built to wash
object in special baskets and using detergent and rinsing
agent.
•Use of specific detergents and rinsing agents for
industrial purposes normally available in the shops is
permitted.
ATTENTION
Anyimproperuseofthemachinerelievesthemanufacturer
from all and every responsibility for accidents or damage
to persons and property, also voiding all conditions of
guarantee.
1.3 TRANSPORT, SHIPMENT AND
STORAGE (Fig. 2)
-The machine is normally shipped in a cardboard box
closed by straps.
-Whentransportingthepackedmachine,usea lifttruck
ortranspallet, positioningthe boxon therelative forks.
ATTENTION
The machine must be sheltered from the weather when
shipped and stored.
ATTENTION
Before installing the machine, control the rotation
way of the motor (Fig. A).
1.4 INSPECTIONS ON ARRIVAL
When the machine arrives, check that the packaging is in
a perfect condition and that there is no visible damage.
If everything is in order, remove the packaging (unless
other instructions have been received from the
manufacturer) and check that the machine is free from
damage caused by transport.
Now check whether there has been any damage to the
structure, crushing or breakages.
If damage or imperfections are discovered:
1 - Immediately notify the haulage contractor both by
phone and in writing by registered letter with return
receipt attached;
2 - Informthemanufacturerbyregisteredletter(withreturn
receipt attached).
IMPORTANT
Norificationofdamageorfaultsmustbeimmediate,inany
casewithin3daysfromthedateonwhichthemachineis
received.
1.5 UNPACKING (Figs 2-3-)
Proceed in the following way in order to remove the
packing:
1. Cut the straps (7) that hold the cardboard in place.
2. Remove the box (8) by lifting it upwards.
3. Remove the protective film from the machine.
4. Removethemachinefromthebasebyliftingitfromthe
lower part of the casing.
5. Allpackingmustbecollectedandnotleftwithinchildren’s
reach since it could become a source of danger. The
packing can be disposed of in the same way as solid
urban waste.
Lift the machine by raising the lower part of the casing
using a lift truck or transpallet.
1.6 MACHINE IDENTIFICATION (Fig. 4)
-The serial number and machine data are stamped on
thedataplate(9)affixedtotherearpartofthemachine
itself.
IMPORTANT
Alwaysstate the modeland serial numberof the machine
when requesting technical assistance or ordering spare
parts.
1.7 DESCRIPTION OF THE SAFETY
DEVICES
•Model SMW15 areequippedwithasafetymicroswitch
that blocks the washing pump if the tub access door is
accidentally opened, and of other electronic safety
devices.
•The electrical parts are enclosed by panels locked by
screws.
•The machine is fitted with an equipotential ground
conductor ( 10 Fig. 6).
• Safety overflow to prevent water from spilling.
1.8 REFERENCE STANDARD
•The machine and its safety devices has been built in
compliance with the following standards:
•Essentialsafety requisites pursuantto Directive 73/23
EEC Annex 1 modified by Directive 93/68 EEC,
Directive 89/336 CEE, 89/392/CEE, 92/368/CEE,93/
68/CEE.
ENGLISH
Fig.A
Inhaltsverzeichnis
Andere Blue Seal Spülmaschine Handbücher
